[Thu May 30 09:07:50 2013] Detection parameters:
  Position = (242.0, 294.0) = 15 2 48.04 -42 9 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.1 +/- 13.7
  Background counts = 20.4
  Rate = 0.02 +/- 0.004

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 4.10'
[Thu May 30 09:09:02 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Thu May 30 09:09:02 2013] source mask rpix=1.9, npix_max = 24, mask sum = 16, frac = 0.667
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 8.48"
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src45.ximg exists
[Thu May 30 09:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src45.csv
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu May 30 09:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src45.csv
[Thu May 30 09:09:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu May 30 09:09:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu May 30 09:09:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu May 30 09:09:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 572.764000, observed total counts = 491.000000
[Thu May 30 09:09:59 2013] Poor agreement between spatial fit and data for source 92
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 09:09:59 2013] Warning, spatial fit 45 centroid is now closest to src. 99
[Thu May 30 09:09:59 2013] Source 92 is offset by -1.999730 and -6.023768 pixels which is larger than
2 X fitted extent = 0.999706 x 0.999706, not incorporating fit results
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:11:03 2013] Using EEF radius (= 8.48 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 8.48"
[Thu May 30 09:11:03 2013] source mask rpix=1.9, npix_max = 24, mask sum = 16, frac = 0.667
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 8.48"
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src41.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src41.csv
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src41_1.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src41.csv
[Thu May 30 09:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Thu May 30 09:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Thu May 30 09:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src41.csv
[Thu May 30 09:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:00 2013] Source 92 is offset by -7.435409 and -6.276895 pixels which is larger than
2 X fitted extent = 0.974809 x 0.974809, not incorporating fit results
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:04 2013] XMMSAS src. selection expression = ellipse(21005.319458, 25527.636169, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 09:13:04 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src92_src.reg
[Thu May 30 09:13:04 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (204, 256) - (279, 331)
[Thu May 30 09:13:04 2013] XMMSAS bgd. selection expression = annulus(21005.319458, 25527.636169, 1087.500000, 2175.000000, X, Y) && !ellipse(23353.250092, 25048.528600, 788.340023, 788.340023, 0.000000, X, Y) && !ellipse(21788.982400, 24175.670000, 1276.624037, 1276.624037, 0.000000, X, Y) && !ellipse(17659.825400, 26361.078000, 1918.592055, 1918.592055, 0.000000, X, Y) && !ellipse(21285.122375, 24832.119385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24201.607000, 24580.728000, 1151.840033, 1151.840033, 0.000000, X, Y) && !ellipse(23771.964000, 25169.722000, 2308.480066, 2308.480066, 0.000000, X, Y) && !ellipse(23387.181914, 25028.739085, 1693.488049, 976.497462, 340.356799, X, Y) && !ellipse(22206.278000, 24020.554000, 1252.440036, 1252.440036, 0.000000, X, Y) && !ellipse(22410.459198, 24923.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17242.294000, 28006.512000, 1591.640046, 1591.640046, 0.000000, X, Y) && !ellipse(17511.484200, 25638.292000, 1592.512046, 1592.512046, 0.000000, X, Y) && !ellipse(20524.106018, 26680.054291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22984.341125, 25972.486328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19356.442000, 23892.697600, 1457.872042, 1457.872042, 0.000000, X, Y) && !ellipse(22216.907562, 27090.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.076874, 26656.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18374.212000, 24128.312000, 1567.256045, 1567.256045, 0.000000, X, Y) && !ellipse(15488.028000, 24896.934000, 3361.520097, 1765.440051, 36.400000, X, Y)
[Thu May 30 09:13:04 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src92.gif
[Thu May 30 09:35:57 2013] Mean detx,y = (-194.30, -6030.22) 
[Thu May 30 09:35:59 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:36:28 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:36:28 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Thu May 30 09:36:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Thu May 30 15:05:44 2013] Not generating rmf since there are only 86 counts
[Thu May 30 15:05:44 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:33 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:33 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src92_src_b10.pi.gz = 335.00
[Thu May 30 20:50:34 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src92_bgd.pi.gz = 109.00
[Thu May 30 20:50:34 2013] Got source and background scale factors 1205682.000000, 839813.000000
[Thu May 30 20:50:34 2013] User source parameters:
  Position = (242.0, 294.0) = 15 2 48.04 -42 9 34.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 178.5 +/- 19.3
  Background aperture counts = 156.5
  Rate = 0.04 +/- 0.005

[Thu May 30 20:50:34 2013] Updating counts from extracted products
[Thu May 30 20:50:34 2013] Set source signif. to 178.51/12.51 = 14.27
[Thu May 30 20:50:47 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:47 2013] Using photon index=1.80, rate=0.0423, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src92.arf
[Thu May 30 20:50:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:47 2013] Updating source flux to 6.5e-13
[Thu May 30 20:51:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src92_pl.csv not found, spectral fit skipped or did not complete