[Thu May 30 09:07:50 2013] Detection parameters:
  Position = (206.0, 294.1) = 15 3 2.13 -42 9 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.5 +/- 10.6
  Background counts = 14.8
  Rate = 0.02 +/- 0.004

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 6.71'
[Thu May 30 09:09:02 2013] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 9.78"
[Thu May 30 09:09:02 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.191
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 9.78"
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src70.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src70.csv
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src70_1.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src70.csv
[Thu May 30 09:09:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Thu May 30 09:09:08 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src70 appears to have run properly
[Thu May 30 09:09:59 2013] Warning, spatial fit 70 centroid is now closest to src. 94
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 300.969000, observed total counts = 287.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 91 = 4.293089 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 70 to 73
[Thu May 30 09:09:59 2013] 291.496700 total counts/ 220.597000 bgd. counts: snr = 4.773584
Spatial fit parameters:
  Offset between fit and detection position for source 91 = 4.293089 pixels
  Position = (201.8, 295.3) = 15 3 3.75 -42 9 28.6
  Extent = 19.9 (19.9-39.8)", rotation angle = 0
  Source counts = 70.9 +/- 17.1
  Background counts = 220.6
  Rate = 0.02 +/- 0.004
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 38
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 19.91"
[Thu May 30 09:11:03 2013] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.970
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 19.91"
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src63.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src63.csv
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src63_1.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src63.csv
[Thu May 30 09:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Thu May 30 09:11:12 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Thu May 30 09:12:00 2013] Warning, spatial fit 63 centroid is now closest to src. 38
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:06 2013] XMMSAS src. selection expression = ellipse(17511.484200, 25638.292000, 1194.384034, 1194.384034, 0.000000, X, Y)
[Thu May 30 09:13:06 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src91_src.reg
[Thu May 30 09:13:06 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (133, 227) - (270, 364)
[Thu May 30 09:13:06 2013] XMMSAS bgd. selection expression = annulus(17511.484200, 25638.292000, 1990.640057, 3981.280115, X, Y) && !ellipse(21788.982400, 24175.670000, 1276.624037, 1276.624037, 0.000000, X, Y) && !ellipse(17659.825400, 26361.078000, 1918.592055, 1918.592055, 0.000000, X, Y) && !ellipse(21285.122375, 24832.119385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23771.964000, 25169.722000, 2308.480066, 2308.480066, 0.000000, X, Y) && !ellipse(21005.319458, 25527.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22206.278000, 24020.554000, 1252.440036, 1252.440036, 0.000000, X, Y) && !ellipse(16573.045800, 29700.755200, 954.160027, 954.160027, 0.000000, X, Y) && !ellipse(17242.294000, 28006.512000, 1591.640046, 1591.640046, 0.000000, X, Y) && !ellipse(20524.106018, 26680.054291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14298.580000, 27275.418000, 1784.472051, 1784.472051, 0.000000, X, Y) && !ellipse(19356.442000, 23892.697600, 1457.872042, 1457.872042, 0.000000, X, Y) && !ellipse(22216.907562, 27090.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18374.212000, 24128.312000, 1567.256045, 1567.256045, 0.000000, X, Y) && !ellipse(15488.028000, 24896.934000, 3361.520097, 1765.440051, 36.400000, X, Y) && !ellipse(15528.960000, 24657.966000, 1743.064050, 1743.064050, 0.000000, X, Y) && !ellipse(14829.520000, 25722.296000, 1707.536049, 1707.536049, 0.000000, X, Y)
[Thu May 30 09:13:06 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src91.gif
[Thu May 30 09:45:45 2013] Mean detx,y = (1180.06, -9281.63) 
[Thu May 30 09:45:47 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:46:15 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:46:15 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src91_src_b10.pi.gz
[Thu May 30 09:46:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src91_bgd.pi.gz
[Thu May 30 15:38:39 2013] Not generating rmf since there are only 70 counts
[Thu May 30 15:38:39 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:38 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:38 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src91_src_b10.pi.gz = 691.00
[Thu May 30 20:50:38 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src91_bgd.pi.gz = 460.00
[Thu May 30 20:50:38 2013] Got source and background scale factors 4264728.000000, 7371472.000000
[Thu May 30 20:50:38 2013] User source parameters:
  Position = (201.8, 295.3) = 15 3 3.75 -42 9 28.6
  Extent = 19.9 (19.9-39.8)", rotation angle = 0
  Source aperture counts = 424.9 +/- 27.3
  Background aperture counts = 266.1
  Rate = 0.1 +/- 0.006

[Thu May 30 20:50:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:48 2013] Using photon index=1.80, rate=0.0168, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src91.arf
[Thu May 30 20:50:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:48 2013] Updating source flux to 2.9e-13
[Thu May 30 20:51:08 2013] Flag c found in src. 91 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Source 91 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src91_pl.csv not found, spectral fit skipped or did not complete