[Thu May 30 09:07:49 2013] Detection parameters:
  Position = (264.7, 299.1) = 15 2 39.14 -42 9 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.9 +/- 12.8
  Background counts = 28.0
  Rate = 0.01 +/- 0.003

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 2.44'
[Thu May 30 09:09:02 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Thu May 30 09:09:02 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.980
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 7.65"
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src81.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src81.csv
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src81_1.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src81.csv
[Thu May 30 09:09:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Thu May 30 09:09:09 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Thu May 30 09:09:59 2013] Warning, spatial fit 81 centroid is now closest to src. 89
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 89
[Thu May 30 09:11:03 2013] Using EEF radius (= 7.65 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 7.65"
[Thu May 30 09:11:03 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.980
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 71 for pass 1, mean size = 7.65"
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src71.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src71.csv
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src71_1.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src71.csv
[Thu May 30 09:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Thu May 30 09:11:12 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Thu May 30 09:12:00 2013] Source 87 is offset by -0.928539 and 5.417958 pixels which is larger than
2 X fitted extent = 1.834230 x 1.834230, not incorporating fit results
[Thu May 30 09:12:00 2013] Source 87 is offset by -6.289297 and 6.100211 pixels which is larger than
2 X fitted extent = 0.879324 x 0.879324, not incorporating fit results
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:07 2013] XMMSAS src. selection expression = ellipse(22984.341125, 25972.486328, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 09:13:07 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src87_src.reg
[Thu May 30 09:13:07 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (227, 262) - (302, 337)
[Thu May 30 09:13:07 2013] XMMSAS bgd. selection expression = annulus(22984.341125, 25972.486328, 1087.500000, 2175.000000, X, Y) && !ellipse(25783.164000, 25452.801200, 2176.672063, 936.472027, 152.104000, X, Y) && !ellipse(26055.625800, 25554.774400, 1054.928030, 1054.928030, 0.000000, X, Y) && !ellipse(26484.832000, 25858.446800, 2109.856061, 2109.856061, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(24059.562800, 25613.310000, 746.853621, 746.853621, 0.000000, X, Y) && !ellipse(23353.250092, 25048.528600, 788.340023, 788.340023, 0.000000, X, Y) && !ellipse(21788.982400, 24175.670000, 1276.624037, 1276.624037, 0.000000, X, Y) && !ellipse(25390.256989, 25970.418060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21285.122375, 24832.119385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24201.607000, 24580.728000, 1151.840033, 1151.840033, 0.000000, X, Y) && !ellipse(23771.964000, 25169.722000, 2308.480066, 2308.480066, 0.000000, X, Y) && !ellipse(21005.319458, 25527.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.122162, 26643.345856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23387.181914, 25028.739085, 1693.488049, 976.497462, 340.356799, X, Y) && !ellipse(22206.278000, 24020.554000, 1252.440036, 1252.440036, 0.000000, X, Y) && !ellipse(22410.459198, 24923.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24868.360535, 25878.408020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.307129, 24694.503906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.106018, 26680.054291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19356.442000, 23892.697600, 1457.872042, 1457.872042, 0.000000, X, Y) && !ellipse(22216.907562, 27090.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.076874, 26656.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.912811, 26409.018280, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:07 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src87.gif
[Thu May 30 09:48:36 2013] Mean detx,y = (-389.84, -4137.85) 
[Thu May 30 09:48:38 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:48:52 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:48:53 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src87_src_b10.pi.gz
[Thu May 30 09:48:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src87_bgd.pi.gz
[Thu May 30 15:57:36 2013] Not generating rmf since there are only 55 counts
[Thu May 30 15:57:36 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:40 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:40 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src87_src_b10.pi.gz = 392.00
[Thu May 30 20:50:40 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src87_bgd.pi.gz = 267.00
[Thu May 30 20:50:40 2013] Got source and background scale factors 1342400.000000, 1126400.000000
[Thu May 30 20:50:40 2013] User source parameters:
  Position = (264.7, 299.1) = 15 2 39.14 -42 9 8.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 73.8 +/- 20.8
  Background aperture counts = 318.2
  Rate = 0.02 +/- 0.005

[Thu May 30 20:50:40 2013] Updating counts from extracted products
[Thu May 30 20:50:40 2013] Set source signif. to 73.80/17.84 = 4.14
[Thu May 30 20:50:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:48 2013] Using photon index=1.80, rate=0.0175, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src87.arf
[Thu May 30 20:50:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:48 2013] Updating source flux to 2.3e-13
[Thu May 30 20:51:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src87_pl.csv not found, spectral fit skipped or did not complete