[Thu May 30 09:07:48 2013] Detection parameters:
  Position = (323.4, 327.9) = 15 2 16.21 -42 7 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 79.5 +/- 16.1
  Background counts = 54.8
  Rate = 0.02 +/- 0.003

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 2.80'
[Thu May 30 09:09:02 2013] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 7.83"
[Thu May 30 09:09:02 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.946
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 7.83"
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src65.ximg exists
[Thu May 30 09:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src65.csv
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src65_1.ximg exists
[Thu May 30 09:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src65.csv
[Thu May 30 09:09:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Thu May 30 09:09:08 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 1024.600000, observed total counts = 1023.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 72 = 5.842472 pixels
[Thu May 30 09:09:59 2013] 985.161000 total counts/ 876.516000 bgd. counts: snr = 3.669694
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 5.842472 pixels
  Position = (319.4, 332.1) = 15 2 17.78 -42 6 48.4
  Extent = 14.5 (12.2-15.7)", rotation angle = 0
  Source counts = 108.6 +/- 31.4
  Background counts = 876.5
  Rate = 0.03 +/- 0.007
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 71
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 14.49"
[Thu May 30 09:11:03 2013] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.954
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 14.49"
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src58.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src58.csv
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src58_1.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src58.csv
[Thu May 30 09:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:11 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Thu May 30 09:11:11 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Thu May 30 09:11:11 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Thu May 30 09:12:00 2013] Warning, spatial fit 58 centroid is now closest to src. 63
[Thu May 30 09:12:00 2013] Source 72 is offset by 0.298115 and 7.125494 pixels which is larger than
2 X fitted extent = 5.055724 x 1.227894, not incorporating fit results
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:06 2013] XMMSAS src. selection expression = ellipse(27735.720000, 28848.420000, 869.598025, 869.598025, 0.000000, X, Y)
[Thu May 30 09:13:06 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src72_src.reg
[Thu May 30 09:13:06 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (269, 282) - (369, 382)
[Thu May 30 09:13:06 2013] XMMSAS bgd. selection expression = annulus(27735.720000, 28848.420000, 1449.330042, 2898.660083, X, Y) && !ellipse(27605.095200, 26328.683600, 798.640023, 798.640023, 0.000000, X, Y) && !ellipse(29029.118000, 26866.981000, 1230.456035, 1230.456035, 0.000000, X, Y) && !ellipse(32245.756000, 29198.812000, 1860.192054, 1860.192054, 0.000000, X, Y) && !ellipse(25783.164000, 25452.801200, 2176.672063, 936.472027, 152.104000, X, Y) && !ellipse(26055.625800, 25554.774400, 1054.928030, 1054.928030, 0.000000, X, Y) && !ellipse(27765.024000, 26278.602000, 2354.496068, 2354.496068, 0.000000, X, Y) && !ellipse(29561.070000, 27939.426000, 869.352025, 869.352025, 0.000000, X, Y) && !ellipse(26393.287800, 26867.564200, 1007.120029, 187.355205, 0.000000, X, Y) && !ellipse(26484.832000, 25858.446800, 2109.856061, 2109.856061, 0.000000, X, Y) && !ellipse(27268.398163, 27017.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(29742.153200, 27083.307420, 516.598415, 516.598415, 0.000000, X, Y) && !ellipse(29536.459595, 28737.826782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(30730.128000, 27984.126000, 1430.744041, 1430.744041, 0.000000, X, Y) && !ellipse(25390.256989, 25970.418060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(29172.107269, 28919.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23771.964000, 25169.722000, 2308.480066, 2308.480066, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(25385.122162, 26643.345856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24855.900482, 29442.715820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23387.181914, 25028.739085, 1693.488049, 976.497462, 340.356799, X, Y) && !ellipse(24868.360535, 25878.408020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25094.972000, 29705.415200, 1274.104037, 1274.104037, 0.000000, X, Y) && !ellipse(28947.842255, 29752.913513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27134.252808, 28656.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.912811, 26409.018280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29053.386000, 31316.243000, 832.144024, 832.144024, 0.000000, X, Y) && !ellipse(29993.522888, 30122.347565, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:06 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src72.gif
[Thu May 30 09:43:24 2013] Mean detx,y = (713.92, 1337.98) 
[Thu May 30 09:43:26 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:43:43 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:43:43 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Thu May 30 09:43:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Thu May 30 20:50:37 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:37 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src72_src_b10.pi.gz = 1095.00
[Thu May 30 20:50:37 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src72_bgd.pi.gz = 1528.00
[Thu May 30 20:50:37 2013] Got source and background scale factors 2369600.000000, 4624364.000000
[Thu May 30 20:50:37 2013] User source parameters:
  Position = (319.4, 332.1) = 15 2 17.78 -42 6 48.4
  Extent = 14.5 (12.2-15.7)", rotation angle = 0
  Source aperture counts = 312.0 +/- 34.1
  Background aperture counts = 783.0
  Rate = 0.07 +/- 0.008

[Thu May 30 20:50:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:48 2013] Using photon index=1.80, rate=0.0257, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src72.arf
[Thu May 30 20:50:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:48 2013] Updating source flux to 2.6e-13
[Thu May 30 20:51:08 2013] Flag b found in src. 72 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Flag c found in src. 72 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src72_pl.csv not found, spectral fit skipped or did not complete