[Thu May 30 09:07:42 2013] Detection parameters: Position = (340.9, 320.1) = 15 2 9.35 -42 7 41.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 206.7 +/- 20.6 Background counts = 37.4 Rate = 0.04 +/- 0.004 [Thu May 30 09:07:51 2013] Off-axis axis estimate = 3.45' [Thu May 30 09:09:02 2013] Using EEF radius (= 8.16 ")to estimate initial spatial extent for simple fitting [Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 8.16" [Thu May 30 09:09:02 2013] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.709 [Thu May 30 09:09:02 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.16" [Thu May 30 09:09:03 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src7.ximg exists [Thu May 30 09:09:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src7.csv [Thu May 30 09:09:03 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src7_1.ximg exists [Thu May 30 09:09:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src7.csv [Thu May 30 09:09:03 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src7_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists [Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists [Thu May 30 09:09:06 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly [Thu May 30 09:09:59 2013] Spatial fit model total counts = 1285.850000, observed total counts = 1279.000000 [Thu May 30 09:09:59 2013] Offset between fit and detection position for source 7 = 2.878686 pixels [Thu May 30 09:09:59 2013] 1249.723000 total counts/ 1049.670000 bgd. counts: snr = 6.174740 Spatial fit parameters: Offset between fit and detection position for source 7 = 2.878686 pixels Position = (341.9, 322.8) = 15 2 8.97 -42 7 29.2 Extent = 16.3 (6.0-32.6)", rotation angle = 0 Source counts = 200.1 +/- 35.4 Background counts = 1049.7 Rate = 0.05 +/- 0.008 [Thu May 30 09:09:59 2013] Source 7 is offset by 2.451557 and 0.658683 pixels which is larger than 2 X fitted extent = 2.069354 x 5.121604, not incorporating fit results [Thu May 30 09:09:59 2013] Spatial fit model total counts = 1152.430000, observed total counts = 1166.000000 [Thu May 30 09:09:59 2013] Offset between fit and detection position for source 7 = 2.716788 pixels [Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 7 to 27 [Thu May 30 09:09:59 2013] 1185.755000 total counts/ 931.766000 bgd. counts: snr = 8.320731 Spatial fit parameters: Offset between fit and detection position for source 7 = 2.716788 pixels Position = (340.3, 320.6) = 15 2 9.61 -42 7 38.7 Extent = 16.7 (16.7-33.4)", rotation angle = 0 Source counts = 254.0 +/- 34.4 Background counts = 931.8 Rate = 0.06 +/- 0.008 [Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000 [Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound [Thu May 30 09:09:59 2013] Source does appear to be extended [Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 30 09:09:59 2013] Source is confused with source 8 [Thu May 30 09:09:59 2013] Source is confused with source 36 [Thu May 30 09:09:59 2013] Source is confused with source 29 [Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 16.72" [Thu May 30 09:11:03 2013] source mask rpix=3.8, npix_max = 75, mask sum = 79, frac = 1.046 [Thu May 30 09:11:03 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 16.72" [Thu May 30 09:11:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src7.ximg exists [Thu May 30 09:11:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src7_1.ximg exists [Thu May 30 09:11:04 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src7 appears to have run properly [Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists [Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists [Thu May 30 09:11:07 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly [Thu May 30 09:12:00 2013] Warning, spatial fit 7 centroid is now closest to src. 70 [Thu May 30 09:12:00 2013] Spatial fit model total counts = 1377.380000, observed total counts = 1383.000000 [Thu May 30 09:12:00 2013] Offset between fit and detection position for source 7 = 1.112037 pixels [Thu May 30 09:12:00 2013] Warning, changing simple spatial fit ID from 7 to 13 [Thu May 30 09:12:00 2013] 1335.486200 total counts/ 1242.900000 bgd. counts: snr = 2.626202 Spatial fit parameters: Offset between fit and detection position for source 7 = 1.112037 pixels Position = (340.3, 321.7) = 15 2 9.58 -42 7 33.8 Extent = 10.9 (6.1-15.9)", rotation angle = 0 Source counts = 92.6 +/- 36.5 Background counts = 1242.9 Rate = 0.02 +/- 0.009 [Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000 [Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound [Thu May 30 09:12:00 2013] Source does appear to be extended [Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Thu May 30 09:13:00 2013] XMMSAS src. selection expression = ellipse(29561.070000, 27939.426000, 652.014019, 652.014019, 0.000000, X, Y) [Thu May 30 09:13:00 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_src.reg [Thu May 30 09:13:00 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (303, 284) - (378, 359) [Thu May 30 09:13:00 2013] XMMSAS bgd. selection expression = annulus(29561.070000, 27939.426000, 1086.690031, 2173.380063, X, Y) && !ellipse(27605.095200, 26328.683600, 798.640023, 798.640023, 0.000000, X, Y) && !ellipse(29029.118000, 26866.981000, 1230.456035, 1230.456035, 0.000000, X, Y) && !ellipse(32245.756000, 29198.812000, 1860.192054, 1860.192054, 0.000000, X, Y) && !ellipse(25783.164000, 25452.801200, 2176.672063, 936.472027, 152.104000, X, Y) && !ellipse(27765.024000, 26278.602000, 2354.496068, 2354.496068, 0.000000, X, Y) && !ellipse(26393.287800, 26867.564200, 1007.120029, 187.355205, 0.000000, X, Y) && !ellipse(26484.832000, 25858.446800, 2109.856061, 2109.856061, 0.000000, X, Y) && !ellipse(27268.398163, 27017.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(29742.153200, 27083.307420, 516.598415, 516.598415, 0.000000, X, Y) && !ellipse(29536.459595, 28737.826782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(32386.052000, 29401.840000, 1495.352043, 1495.352043, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(30730.128000, 27984.126000, 1430.744041, 1430.744041, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(29172.107269, 28919.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(27735.720000, 28848.420000, 1159.464033, 1159.464033, 0.000000, X, Y) && !ellipse(28947.842255, 29752.913513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27134.252808, 28656.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.848389, 30739.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29993.522888, 30122.347565, 870.000000, 870.000000, 0.000000, X, Y) [Thu May 30 09:13:00 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7.gif [Thu May 30 09:13:10 2013] ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create [Thu May 30 09:13:10 2013] Mean detx,y = (-699.64, 2738.09) [Thu May 30 09:13:10 2013] ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_src.img and ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create [Thu May 30 09:13:10 2013] ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create [Thu May 30 09:13:10 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Thu May 30 09:13:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_bgd.pi.gz [Thu May 30 09:13:10 2013] ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create [Thu May 30 12:09:12 2013] Not generating rmf since there are only 92 counts [Thu May 30 12:09:12 2013] rmf not generated due to insufficient counts [Thu May 30 20:50:24 2013] Updating aperture counts using extracted products [Thu May 30 20:50:24 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 933.00 [Thu May 30 20:50:24 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_bgd.pi.gz = 0.00 [Thu May 30 20:50:24 2013] Got source and background scale factors 1325352.000000, 0.000000 [Thu May 30 20:50:24 2013] Background scale factor is not positive, halting re-assessment of this source [Thu May 30 20:50:44 2013] Calculating source flux in energy range 0.30-8.00 [Thu May 30 20:50:44 2013] Using photon index=1.80, rate=0.0219, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7.arf [Thu May 30 20:50:44 2013] Assuming count rate is from the 0.30-10.00 bandpass [Thu May 30 20:50:44 2013] Updating source flux to 2.4e-13 [Thu May 30 20:51:08 2013] Flag b found in src. 7 procflags, skipping spectral fitting [Thu May 30 20:51:08 2013] Flag c found in src. 7 procflags, skipping spectral fitting [Thu May 30 20:51:08 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting [Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete