[Thu May 30 09:07:47 2013] Detection parameters:
  Position = (345.3, 346.8) = 15 2 7.64 -42 5 43.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.4 +/- 14.4
  Background counts = 53.2
  Rate = 0.01 +/- 0.003

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 4.88'
[Thu May 30 09:09:02 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Thu May 30 09:09:02 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 91 for pass 0, mean size = 8.87"
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src91.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src91.csv
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src91_1.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src91.csv
[Thu May 30 09:09:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src91.ximg exists
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src91_1.ximg exists
[Thu May 30 09:09:09 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src91 appears to have run properly
[Thu May 30 09:09:59 2013] Warning, spatial fit 91 centroid is now closest to src. 66
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:11:03 2013] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 8.87"
[Thu May 30 09:11:03 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 80 for pass 1, mean size = 8.87"
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src80.ximg exists
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src80_1.ximg exists
[Thu May 30 09:11:07 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src80 appears to have run properly
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Thu May 30 09:11:12 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src80 appears to have run properly
[Thu May 30 09:12:00 2013] Source 61 is offset by 1.745734 and -4.643775 pixels which is larger than
2 X fitted extent = 1.195609 x 1.195609, not incorporating fit results
[Thu May 30 09:12:00 2013] Warning, spatial fit 80 centroid is now closest to src. 58
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:08 2013] XMMSAS src. selection expression = ellipse(29993.522888, 30122.347565, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 09:13:08 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src61_src.reg
[Thu May 30 09:13:08 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (308, 309) - (383, 384)
[Thu May 30 09:13:08 2013] XMMSAS bgd. selection expression = annulus(29993.522888, 30122.347565, 1087.500000, 2175.000000, X, Y) && !ellipse(29029.118000, 26866.981000, 1230.456035, 1230.456035, 0.000000, X, Y) && !ellipse(32245.756000, 29198.812000, 1860.192054, 1860.192054, 0.000000, X, Y) && !ellipse(27765.024000, 26278.602000, 2354.496068, 2354.496068, 0.000000, X, Y) && !ellipse(29561.070000, 27939.426000, 869.352025, 869.352025, 0.000000, X, Y) && !ellipse(26484.832000, 25858.446800, 2109.856061, 2109.856061, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(29536.459595, 28737.826782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(32386.052000, 29401.840000, 1495.352043, 1495.352043, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(30730.128000, 27984.126000, 1430.744041, 1430.744041, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(29172.107269, 28919.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(27735.720000, 28848.420000, 1159.464033, 1159.464033, 0.000000, X, Y) && !ellipse(28947.842255, 29752.913513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27134.252808, 28656.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.848389, 30739.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29053.386000, 31316.243000, 832.144024, 832.144024, 0.000000, X, Y)
[Thu May 30 09:13:08 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src61.gif
[Thu May 30 09:52:19 2013] Mean detx,y = (1148.82, 3873.60) 
[Thu May 30 09:52:20 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:52:35 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:52:35 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Thu May 30 09:52:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Thu May 30 15:58:51 2013] Not generating rmf since there are only 55 counts
[Thu May 30 15:58:51 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:42 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:42 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 497.00
[Thu May 30 20:50:43 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src61_bgd.pi.gz = 363.00
[Thu May 30 20:50:43 2013] Got source and background scale factors 1325648.000000, 1012092.000000
[Thu May 30 20:50:43 2013] User source parameters:
  Position = (345.3, 346.8) = 15 2 7.64 -42 5 43.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 21.5 +/- 23.3
  Background aperture counts = 475.5
  Rate = 0.005 +/- 0.006

[Thu May 30 20:50:43 2013] Updating counts from extracted products
[Thu May 30 20:50:43 2013] Set source signif. to 21.54/21.81 = 0.99
[Thu May 30 20:50:49 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:49 2013] Using photon index=1.80, rate=0.0051, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src61.arf
[Thu May 30 20:50:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:49 2013] Updating source flux to 6.1e-14
[Thu May 30 20:51:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete