[Thu May 30 09:07:47 2013] Detection parameters:
  Position = (368.4, 352.9) = 15 1 58.62 -42 5 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.0 +/- 14.8
  Background counts = 39.1
  Rate = 0.02 +/- 0.004

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 6.43'
[Thu May 30 09:09:02 2013] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 9.64"
[Thu May 30 09:09:02 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.016
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 9.64"
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src51.ximg exists
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu May 30 09:09:05 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src51 appears to have run properly
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu May 30 09:09:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu May 30 09:09:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src51.csv
[Thu May 30 09:09:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 608.342000, observed total counts = 617.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 60 = 7.568839 pixels
[Thu May 30 09:09:59 2013] 573.532000 total counts/ 270.458000 bgd. counts: snr = 18.428872
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 7.568839 pixels
  Position = (370.3, 360.2) = 15 1 57.90 -42 4 46.0
  Extent = 26.2" x 26.2", rotation angle = 313
  Source counts = 303.1 +/- 23.9
  Background counts = 270.5
  Rate = 0.07 +/- 0.006
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 726.202000, observed total counts = 734.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 60 = 4.874989 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 51 to 84
[Thu May 30 09:09:59 2013] 642.192000 total counts/ 371.557000 bgd. counts: snr = 14.040134
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 4.874989 pixels
  Position = (367.4, 356.3) = 15 1 59.01 -42 5 3.3
  Extent = 19.0 (19.0-38.0)", rotation angle = 0
  Source counts = 270.6 +/- 25.3
  Background counts = 371.6
  Rate = 0.06 +/- 0.006
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 62
[Thu May 30 09:09:59 2013] Source is confused with source 59
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 19.02"
[Thu May 30 09:11:03 2013] source mask rpix=4.4, npix_max = 95, mask sum = 79, frac = 0.832
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 19.02"
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src47.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src47.csv
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src47_1.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src47.csv
[Thu May 30 09:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:10 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Thu May 30 09:11:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src47.csv
[Thu May 30 09:11:10 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Thu May 30 09:11:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src47.csv
[Thu May 30 09:11:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:00 2013] Warning, spatial fit 47 centroid is now closest to src. 65
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:04 2013] XMMSAS src. selection expression = ellipse(31915.352000, 30948.542000, 1141.470033, 1141.470033, 0.000000, X, Y)
[Thu May 30 09:13:04 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src60_src.reg
[Thu May 30 09:13:04 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (302, 291) - (433, 422)
[Thu May 30 09:13:04 2013] XMMSAS bgd. selection expression = annulus(31915.352000, 30948.542000, 1902.450055, 3804.900109, X, Y) && !ellipse(29029.118000, 26866.981000, 1230.456035, 1230.456035, 0.000000, X, Y) && !ellipse(32245.756000, 29198.812000, 1860.192054, 1860.192054, 0.000000, X, Y) && !ellipse(27765.024000, 26278.602000, 2354.496068, 2354.496068, 0.000000, X, Y) && !ellipse(29561.070000, 27939.426000, 869.352025, 869.352025, 0.000000, X, Y) && !ellipse(26484.832000, 25858.446800, 2109.856061, 2109.856061, 0.000000, X, Y) && !ellipse(27268.398163, 27017.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(34526.093323, 31878.017548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(33215.132782, 29732.737946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34160.888733, 31251.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(33274.055847, 30655.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29742.153200, 27083.307420, 516.598415, 516.598415, 0.000000, X, Y) && !ellipse(29536.459595, 28737.826782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(32386.052000, 29401.840000, 1495.352043, 1495.352043, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(33858.196808, 31694.549713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34339.768677, 32587.186493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30730.128000, 27984.126000, 1430.744041, 1430.744041, 0.000000, X, Y) && !ellipse(34982.014954, 32232.748047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36825.450000, 35866.668000, 1799.888052, 1799.888052, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(29172.107269, 28919.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33295.638580, 31934.994476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36372.822845, 35438.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34018.342000, 32550.280000, 1744.984050, 1744.984050, 0.000000, X, Y) && !ellipse(35970.540771, 32417.952271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.490845, 33054.492889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35815.733978, 32922.482178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.720000, 28848.420000, 1159.464033, 1159.464033, 0.000000, X, Y) && !ellipse(36054.938400, 32714.692000, 1745.112050, 1745.112050, 0.000000, X, Y) && !ellipse(28947.842255, 29752.913513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.848389, 30739.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29053.386000, 31316.243000, 832.144024, 832.144024, 0.000000, X, Y) && !ellipse(29993.522888, 30122.347565, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:04 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src60.gif
[Thu May 30 09:37:47 2013] Mean detx,y = (1243.48, 5871.92) 
[Thu May 30 09:37:50 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:38:25 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:38:25 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Thu May 30 09:38:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Thu May 30 20:50:34 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:34 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 1293.00
[Thu May 30 20:50:34 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src60_bgd.pi.gz = 1146.00
[Thu May 30 20:50:34 2013] Got source and background scale factors 3507737.000000, 4722970.000000
[Thu May 30 20:50:35 2013] User source parameters:
  Position = (367.4, 356.3) = 15 1 59.01 -42 5 3.3
  Extent = 19.0 (19.0-38.0)", rotation angle = 0
  Source aperture counts = 441.9 +/- 37.0
  Background aperture counts = 851.1
  Rate = 0.1 +/- 0.009

[Thu May 30 20:50:47 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:47 2013] Using photon index=1.80, rate=0.0641, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src60.arf
[Thu May 30 20:50:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:47 2013] Updating source flux to 8.2e-13
[Thu May 30 20:51:08 2013] Flag c found in src. 60 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete