[Thu May 30 09:07:42 2013] Detection parameters:
  Position = (372.2, 334.1) = 15 1 57.14 -42 6 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.9 +/- 19.8
  Background counts = 26.7
  Rate = 0.05 +/- 0.005

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 5.94'
[Thu May 30 09:09:02 2013] Using EEF radius (= 9.40 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 9.40"
[Thu May 30 09:09:02 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.272
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 9.40"
[Thu May 30 09:09:03 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src3.ximg exists
[Thu May 30 09:09:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src3.csv
[Thu May 30 09:09:03 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu May 30 09:09:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src3.csv
[Thu May 30 09:09:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu May 30 09:09:06 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu May 30 09:09:59 2013] Warning, spatial fit 3 centroid is now closest to src. 28
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 966.841000, observed total counts = 891.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 6 = 0.881167 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 3 to 28
[Thu May 30 09:09:59 2013] 963.467000 total counts/ 575.182000 bgd. counts: snr = 16.190042
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.881167 pixels
  Position = (371.9, 334.9) = 15 1 57.26 -42 6 36.2
  Extent = 19.0 (19.0-19.0)", rotation angle = 0
  Source counts = 388.3 +/- 31.0
  Background counts = 575.2
  Rate = 0.09 +/- 0.007
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 5
[Thu May 30 09:09:59 2013] Source is confused with source 28
[Thu May 30 09:09:59 2013] Source is confused with source 27
[Thu May 30 09:09:59 2013] Source is confused with source 62
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 18.98"
[Thu May 30 09:11:03 2013] source mask rpix=4.4, npix_max = 94, mask sum = 100, frac = 1.057
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 18.98"
[Thu May 30 09:11:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src3.ximg exists
[Thu May 30 09:11:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu May 30 09:11:04 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu May 30 09:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:00 2013] Warning, spatial fit 3 centroid is now closest to src. 28
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 2033.910000, observed total counts = 1986.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 6 = 1.422979 pixels
[Thu May 30 09:12:00 2013] Warning, changing simple spatial fit ID from 3 to 17
[Thu May 30 09:12:00 2013] 1962.445000 total counts/ 1203.000000 bgd. counts: snr = 21.895936
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.422979 pixels
  Position = (371.2, 336.2) = 15 1 57.52 -42 6 30.7
  Extent = 23.3 (19.9-26.4)", rotation angle = 0
  Source counts = 759.4 +/- 44.3
  Background counts = 1203.0
  Rate = 0.2 +/- 0.01
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:00 2013] XMMSAS src. selection expression = ellipse(32245.756000, 29198.812000, 1395.144040, 1395.144040, 0.000000, X, Y)
[Thu May 30 09:13:00 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_src.reg
[Thu May 30 09:13:00 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (291, 256) - (451, 416)
[Thu May 30 09:13:00 2013] XMMSAS bgd. selection expression = annulus(32245.756000, 29198.812000, 2325.240067, 4650.480134, X, Y) && !ellipse(27605.095200, 26328.683600, 798.640023, 798.640023, 0.000000, X, Y) && !ellipse(29029.118000, 26866.981000, 1230.456035, 1230.456035, 0.000000, X, Y) && !ellipse(25783.164000, 25452.801200, 2176.672063, 936.472027, 152.104000, X, Y) && !ellipse(27765.024000, 26278.602000, 2354.496068, 2354.496068, 0.000000, X, Y) && !ellipse(29561.070000, 27939.426000, 869.352025, 869.352025, 0.000000, X, Y) && !ellipse(26484.832000, 25858.446800, 2109.856061, 2109.856061, 0.000000, X, Y) && !ellipse(27268.398163, 27017.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(34526.093323, 31878.017548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(33215.132782, 29732.737946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34160.888733, 31251.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(33274.055847, 30655.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29742.153200, 27083.307420, 516.598415, 516.598415, 0.000000, X, Y) && !ellipse(29536.459595, 28737.826782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(32386.052000, 29401.840000, 1495.352043, 1495.352043, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(33858.196808, 31694.549713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34339.768677, 32587.186493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30730.128000, 27984.126000, 1430.744041, 1430.744041, 0.000000, X, Y) && !ellipse(34982.014954, 32232.748047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(29172.107269, 28919.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33295.638580, 31934.994476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34018.342000, 32550.280000, 1744.984050, 1744.984050, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(35970.540771, 32417.952271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.490845, 33054.492889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35815.733978, 32922.482178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38115.836000, 35027.416000, 1678.712048, 1678.712048, 0.000000, X, Y) && !ellipse(27735.720000, 28848.420000, 1159.464033, 1159.464033, 0.000000, X, Y) && !ellipse(36054.938400, 32714.692000, 1745.112050, 1745.112050, 0.000000, X, Y) && !ellipse(28947.842255, 29752.913513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27134.252808, 28656.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.848389, 30739.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29053.386000, 31316.243000, 832.144024, 832.144024, 0.000000, X, Y) && !ellipse(29993.522888, 30122.347565, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:00 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6.gif
[Thu May 30 09:13:10 2013] ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu May 30 09:13:10 2013] Mean detx,y = (-224.51, 5523.99) 
[Thu May 30 09:13:10 2013] ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_src.img and ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu May 30 09:13:10 2013] ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_src_b10.pi.gz and ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu May 30 09:13:10 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu May 30 09:13:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu May 30 09:13:10 2013] ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu May 30 20:50:22 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:23 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 2207.00
[Thu May 30 20:50:24 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1053.00
[Thu May 30 20:50:24 2013] Got source and background scale factors 5535750.000000, 12375617.000000
[Thu May 30 20:50:24 2013] User source parameters:
  Position = (371.2, 336.2) = 15 1 57.52 -42 6 30.7
  Extent = 23.3 (19.9-26.4)", rotation angle = 0
  Source aperture counts = 1736.0 +/- 48.0
  Background aperture counts = 471.0
  Rate = 0.4 +/- 0.01

[Thu May 30 20:50:44 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:44 2013] Using photon index=1.80, rate=0.18, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6.arf
[Thu May 30 20:50:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:44 2013] Updating source flux to 2e-12
[Thu May 30 20:51:08 2013] Flag c found in src. 6 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete