[Thu May 30 09:07:47 2013] Detection parameters:
  Position = (390.3, 371.6) = 15 1 50.08 -42 3 54.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.6 +/- 12.2
  Background counts = 37.9
  Rate = 0.02 +/- 0.004

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 8.51'
[Thu May 30 09:09:02 2013] Using EEF radius (= 10.68 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 10.68"
[Thu May 30 09:09:02 2013] source mask rpix=2.5, npix_max = 34, mask sum = 25, frac = 0.715
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 10.68"
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src50.ximg exists
[Thu May 30 09:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src50.csv
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src50_1.ximg exists
[Thu May 30 09:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src50.csv
[Thu May 30 09:09:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Thu May 30 09:09:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Thu May 30 09:09:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src50.csv
[Thu May 30 09:09:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 858.081000, observed total counts = 735.000000
[Thu May 30 09:09:59 2013] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 731.652000, observed total counts = 672.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 55 = 3.393714 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 50 to 33
[Thu May 30 09:09:59 2013] 718.188000 total counts/ 451.326000 bgd. counts: snr = 12.561502
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 3.393714 pixels
  Position = (391.6, 374.7) = 15 1 49.58 -42 3 43.0
  Extent = 21.8 (21.8-43.6)", rotation angle = 0
  Source counts = 266.9 +/- 26.8
  Background counts = 451.3
  Rate = 0.06 +/- 0.006
[Thu May 30 09:09:59 2013] Source 55 is offset by -0.987356 and -2.861632 pixels which is larger than
2 X fitted extent = 1.195030 x 1.195030, not incorporating fit results
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 3
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 21.81"
[Thu May 30 09:11:03 2013] source mask rpix=5.0, npix_max = 121, mask sum = 90, frac = 0.740
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 46 for pass 1, mean size = 21.81"
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src46.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src46.csv
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src46_1.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src46.csv
[Thu May 30 09:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:10 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Thu May 30 09:11:10 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Thu May 30 09:11:10 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Thu May 30 09:12:00 2013] Warning, spatial fit 46 centroid is now closest to src. 24
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:04 2013] XMMSAS src. selection expression = ellipse(34018.342000, 32550.280000, 1308.738038, 1308.738038, 0.000000, X, Y)
[Thu May 30 09:13:04 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src55_src.reg
[Thu May 30 09:13:04 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (316, 299) - (467, 450)
[Thu May 30 09:13:04 2013] XMMSAS bgd. selection expression = annulus(34018.342000, 32550.280000, 2181.230063, 4362.460126, X, Y) && !ellipse(32245.756000, 29198.812000, 1860.192054, 1860.192054, 0.000000, X, Y) && !ellipse(27765.024000, 26278.602000, 2354.496068, 2354.496068, 0.000000, X, Y) && !ellipse(29561.070000, 27939.426000, 869.352025, 869.352025, 0.000000, X, Y) && !ellipse(34526.093323, 31878.017548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(33215.132782, 29732.737946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34160.888733, 31251.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(33274.055847, 30655.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29536.459595, 28737.826782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(32386.052000, 29401.840000, 1495.352043, 1495.352043, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(33858.196808, 31694.549713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34339.768677, 32587.186493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30730.128000, 27984.126000, 1430.744041, 1430.744041, 0.000000, X, Y) && !ellipse(34982.014954, 32232.748047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36825.450000, 35866.668000, 1799.888052, 1799.888052, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(29172.107269, 28919.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33295.638580, 31934.994476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36372.822845, 35438.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(35970.540771, 32417.952271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.490845, 33054.492889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35815.733978, 32922.482178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38115.836000, 35027.416000, 1678.712048, 1678.712048, 0.000000, X, Y) && !ellipse(37624.208000, 37361.238000, 2101.616060, 2101.616060, 0.000000, X, Y) && !ellipse(36054.938400, 32714.692000, 1745.112050, 1745.112050, 0.000000, X, Y) && !ellipse(28947.842255, 29752.913513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.848389, 30739.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29053.386000, 31316.243000, 832.144024, 832.144024, 0.000000, X, Y) && !ellipse(29993.522888, 30122.347565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37818.588000, 37777.398000, 1185.000034, 1185.000034, 0.000000, X, Y) && !ellipse(36907.792664, 36366.692383, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:04 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src55.gif
[Thu May 30 09:37:12 2013] Mean detx,y = (2045.00, 8481.84) 
[Thu May 30 09:37:14 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:37:41 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:37:42 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu May 30 09:37:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Thu May 30 20:50:34 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:34 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 1768.00
[Thu May 30 20:50:34 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src55_bgd.pi.gz = 2246.00
[Thu May 30 20:50:34 2013] Got source and background scale factors 4875692.000000, 13946042.000000
[Thu May 30 20:50:34 2013] User source parameters:
  Position = (391.6, 374.7) = 15 1 49.58 -42 3 43.0
  Extent = 21.8 (21.8-43.6)", rotation angle = 0
  Source aperture counts = 982.8 +/- 43.1
  Background aperture counts = 785.2
  Rate = 0.2 +/- 0.01

[Thu May 30 20:50:47 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:47 2013] Using photon index=1.80, rate=0.0632, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src55.arf
[Thu May 30 20:50:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:47 2013] Updating source flux to 1.1e-12
[Thu May 30 20:51:08 2013] Flag b found in src. 55 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Flag p found in src. 55 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Flag c found in src. 55 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete