[Thu May 30 09:07:42 2013] Detection parameters:
  Position = (382.3, 342.3) = 15 1 53.16 -42 6 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.1 +/- 16.1
  Background counts = 23.2
  Rate = 0.04 +/- 0.004

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 6.86'
[Thu May 30 09:09:02 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Thu May 30 09:09:02 2013] source mask rpix=2.3, npix_max = 30, mask sum = 20, frac = 0.653
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 9.86"
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src15.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src15.csv
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src15.csv
[Thu May 30 09:09:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May 30 09:09:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May 30 09:09:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu May 30 09:09:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 856.159000, observed total counts = 608.000000
[Thu May 30 09:09:59 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 6
[Thu May 30 09:11:03 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Thu May 30 09:11:03 2013] source mask rpix=2.3, npix_max = 30, mask sum = 20, frac = 0.653
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 9.86"
[Thu May 30 09:11:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src14.ximg exists
[Thu May 30 09:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src14.csv
[Thu May 30 09:11:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu May 30 09:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src14.csv
[Thu May 30 09:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu May 30 09:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu May 30 09:11:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu May 30 09:11:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Thu May 30 09:11:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:00 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.189936 pixels away
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:01 2013] XMMSAS src. selection expression = ellipse(33215.132782, 29732.737946, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 09:13:01 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_src.reg
[Thu May 30 09:13:01 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (345, 305) - (420, 380)
[Thu May 30 09:13:01 2013] XMMSAS bgd. selection expression = annulus(33215.132782, 29732.737946, 1087.500000, 2175.000000, X, Y) && !ellipse(32245.756000, 29198.812000, 1860.192054, 1860.192054, 0.000000, X, Y) && !ellipse(34526.093323, 31878.017548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(34160.888733, 31251.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(33274.055847, 30655.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(32386.052000, 29401.840000, 1495.352043, 1495.352043, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(33858.196808, 31694.549713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34339.768677, 32587.186493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30730.128000, 27984.126000, 1430.744041, 1430.744041, 0.000000, X, Y) && !ellipse(34982.014954, 32232.748047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(33295.638580, 31934.994476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34018.342000, 32550.280000, 1744.984050, 1744.984050, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(35970.540771, 32417.952271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36054.938400, 32714.692000, 1745.112050, 1745.112050, 0.000000, X, Y) && !ellipse(31527.848389, 30739.859589, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:01 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5.gif
[Thu May 30 09:13:10 2013] ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu May 30 09:13:10 2013] Mean detx,y = (-132.64, 6792.14) 
[Thu May 30 09:13:10 2013] ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_src.img and ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu May 30 09:13:10 2013] ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu May 30 09:13:10 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu May 30 09:13:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May 30 09:13:10 2013] ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu May 30 13:15:43 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu May 30 13:15:43 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:28 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:28 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 414.00
[Thu May 30 20:50:28 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 0.00
[Thu May 30 20:50:28 2013] Got source and background scale factors 1069968.000000, 0.000000
[Thu May 30 20:50:28 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu May 30 20:50:46 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:46 2013] Using photon index=1.80, rate=0.0378, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5.arf
[Thu May 30 20:50:46 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:46 2013] Updating source flux to 6e-13
[Thu May 30 20:51:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete