[Thu May 30 09:07:46 2013] Detection parameters:
  Position = (436.5, 435.1) = 15 1 32.09 -41 59 18.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.9 +/- 13.6
  Background counts = 23.2
  Rate = 0.02 +/- 0.003

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 14.09'
[Thu May 30 09:09:02 2013] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 13.47"
[Thu May 30 09:09:02 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.947
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 66 for pass 0, mean size = 13.47"
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src66.ximg exists
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src66_1.ximg exists
[Thu May 30 09:09:05 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src66 appears to have run properly
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src66.ximg exists
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src66_1.ximg exists
[Thu May 30 09:09:08 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src66 appears to have run properly
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 576.096000, observed total counts = 606.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 43 = 4.302299 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 66 to 52
[Thu May 30 09:09:59 2013] 530.179000 total counts/ 253.356000 bgd. counts: snr = 17.391481
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 4.302299 pixels
  Position = (434.9, 431.1) = 15 1 32.72 -41 59 37.1
  Extent = 26.2" x 17.2", rotation angle = 311
  Source counts = 276.8 +/- 23.0
  Background counts = 253.4
  Rate = 0.07 +/- 0.005
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 528.364000, observed total counts = 527.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 43 = 2.181869 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 52 to 66
[Thu May 30 09:09:59 2013] 541.655000 total counts/ 192.007000 bgd. counts: snr = 25.233211
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.181869 pixels
  Position = (433.0, 430.0) = 15 1 33.45 -41 59 42.1
  Extent = 26.3 (24.9-26.9)", rotation angle = 0
  Source counts = 349.6 +/- 23.3
  Background counts = 192.0
  Rate = 0.08 +/- 0.006
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 111
[Thu May 30 09:09:59 2013] Source is confused with source 45
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 26.27"
[Thu May 30 09:11:03 2013] source mask rpix=6.0, npix_max = 171, mask sum = 196, frac = 1.146
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 26.27"
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src59.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src59.csv
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src59_1.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src59.csv
[Thu May 30 09:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:11 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Thu May 30 09:11:12 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Thu May 30 09:12:00 2013] Warning, spatial fit 59 centroid is now closest to src. 111
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:06 2013] XMMSAS src. selection expression = ellipse(37624.208000, 37361.238000, 1576.212045, 1576.212045, 0.000000, X, Y)
[Thu May 30 09:13:06 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src43_src.reg
[Thu May 30 09:13:06 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (342, 339) - (524, 521)
[Thu May 30 09:13:06 2013] XMMSAS bgd. selection expression = annulus(37624.208000, 37361.238000, 2627.020076, 5254.040151, X, Y) && !ellipse(34526.093323, 31878.017548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34160.888733, 31251.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(33858.196808, 31694.549713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34339.768677, 32587.186493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34982.014954, 32232.748047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36825.450000, 35866.668000, 1799.888052, 1799.888052, 0.000000, X, Y) && !ellipse(33295.638580, 31934.994476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36372.822845, 35438.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34018.342000, 32550.280000, 1744.984050, 1744.984050, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(35970.540771, 32417.952271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.490845, 33054.492889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35815.733978, 32922.482178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38115.836000, 35027.416000, 1678.712048, 1678.712048, 0.000000, X, Y) && !ellipse(36054.938400, 32714.692000, 1745.112050, 1745.112050, 0.000000, X, Y) && !ellipse(37818.588000, 37777.398000, 1185.000034, 1185.000034, 0.000000, X, Y) && !ellipse(36907.792664, 36366.692383, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:06 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src43.gif
[Thu May 30 09:43:47 2013] Mean detx,y = (5555.57, 13307.16) 
[Thu May 30 09:43:48 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:44:43 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:44:43 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu May 30 09:44:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Thu May 30 20:50:37 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:37 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 1319.00
[Thu May 30 20:50:37 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src43_bgd.pi.gz = 2737.00
[Thu May 30 20:50:38 2013] Got source and background scale factors 7539824.000000, 24975377.000000
[Thu May 30 20:50:38 2013] User source parameters:
  Position = (433.0, 430.0) = 15 1 33.45 -41 59 42.1
  Extent = 26.3 (24.9-26.9)", rotation angle = 0
  Source aperture counts = 492.7 +/- 37.3
  Background aperture counts = 826.3
  Rate = 0.1 +/- 0.009

[Thu May 30 20:50:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:48 2013] Using photon index=1.80, rate=0.0828, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src43.arf
[Thu May 30 20:50:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:48 2013] Updating source flux to 1.6e-12
[Thu May 30 20:51:08 2013] Flag c found in src. 43 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete