[Thu May 30 09:07:46 2013] Detection parameters:
  Position = (245.2, 286.0) = 15 2 46.78 -42 10 8.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.0 +/- 13.8
  Background counts = 17.6
  Rate = 0.03 +/- 0.004

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 3.96'
[Thu May 30 09:09:02 2013] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 8.41"
[Thu May 30 09:09:02 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 8.41"
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src39.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src39.csv
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src39.csv
[Thu May 30 09:09:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu May 30 09:09:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src39.csv
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu May 30 09:09:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src39.csv
[Thu May 30 09:09:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:59 2013] Warning, spatial fit 39 centroid is now closest to src. 92
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 22
[Thu May 30 09:11:03 2013] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 8.41"
[Thu May 30 09:11:03 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 8.41"
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src35.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src35.csv
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src35.csv
[Thu May 30 09:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu May 30 09:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu May 30 09:11:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu May 30 09:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:00 2013] Source 41 is offset by 1.577236 and 0.867361 pixels which is larger than
2 X fitted extent = 1.141595 x 1.141595, not incorporating fit results
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:03 2013] XMMSAS src. selection expression = ellipse(21285.122375, 24832.119385, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 09:13:03 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src41_src.reg
[Thu May 30 09:13:03 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (208, 248) - (283, 323)
[Thu May 30 09:13:03 2013] XMMSAS bgd. selection expression = annulus(21285.122375, 24832.119385, 1087.500000, 2175.000000, X, Y) && !ellipse(24059.562800, 25613.310000, 746.853621, 746.853621, 0.000000, X, Y) && !ellipse(23353.250092, 25048.528600, 788.340023, 788.340023, 0.000000, X, Y) && !ellipse(21788.982400, 24175.670000, 1276.624037, 1276.624037, 0.000000, X, Y) && !ellipse(17659.825400, 26361.078000, 1918.592055, 1918.592055, 0.000000, X, Y) && !ellipse(24201.607000, 24580.728000, 1151.840033, 1151.840033, 0.000000, X, Y) && !ellipse(23771.964000, 25169.722000, 2308.480066, 2308.480066, 0.000000, X, Y) && !ellipse(21005.319458, 25527.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23387.181914, 25028.739085, 1693.488049, 976.497462, 340.356799, X, Y) && !ellipse(22206.278000, 24020.554000, 1252.440036, 1252.440036, 0.000000, X, Y) && !ellipse(22410.459198, 24923.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.106018, 26680.054291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22984.341125, 25972.486328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19356.442000, 23892.697600, 1457.872042, 1457.872042, 0.000000, X, Y) && !ellipse(22216.907562, 27090.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.076874, 26656.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.912811, 26409.018280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18374.212000, 24128.312000, 1567.256045, 1567.256045, 0.000000, X, Y)
[Thu May 30 09:13:03 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src41.gif
[Thu May 30 09:21:03 2013] Mean detx,y = (-905.45, -6026.23) 
[Thu May 30 09:21:05 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:21:35 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:21:35 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Thu May 30 09:21:35 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Thu May 30 14:29:30 2013] Not generating rmf since there are only 92 counts
[Thu May 30 14:29:30 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:32 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:32 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 375.00
[Thu May 30 20:50:32 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src41_bgd.pi.gz = 119.00
[Thu May 30 20:50:32 2013] Got source and background scale factors 1239166.000000, 1051771.000000
[Thu May 30 20:50:32 2013] User source parameters:
  Position = (245.2, 286.0) = 15 2 46.78 -42 10 8.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 234.8 +/- 20.4
  Background aperture counts = 140.2
  Rate = 0.06 +/- 0.005

[Thu May 30 20:50:32 2013] Updating counts from extracted products
[Thu May 30 20:50:32 2013] Set source signif. to 234.80/11.84 = 19.83
[Thu May 30 20:50:47 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:47 2013] Using photon index=1.80, rate=0.0556, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src41.arf
[Thu May 30 20:50:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:47 2013] Updating source flux to 8.5e-13
[Thu May 30 20:51:08 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete