[Thu May 30 09:07:45 2013] Detection parameters:
  Position = (203.7, 302.0) = 15 3 3.01 -42 8 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.0 +/- 12.8
  Background counts = 17.7
  Rate = 0.03 +/- 0.005

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 6.87'
[Thu May 30 09:09:02 2013] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 9.87"
[Thu May 30 09:09:02 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.979
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 9.87"
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src35.ximg exists
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src35_1.ximg exists
[Thu May 30 09:09:04 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src35 appears to have run properly
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Thu May 30 09:09:07 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 393.112000, observed total counts = 392.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 38 = 1.369858 pixels
[Thu May 30 09:09:59 2013] 373.843100 total counts/ 296.656000 bgd. counts: snr = 4.481446
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 1.369858 pixels
  Position = (202.9, 303.1) = 15 3 3.33 -42 8 54.3
  Extent = 13.5 (6.1-19.7)", rotation angle = 0
  Source counts = 77.2 +/- 19.3
  Background counts = 296.7
  Rate = 0.02 +/- 0.005
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 91
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 13.49"
[Thu May 30 09:11:03 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.080
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 13.49"
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src31.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src31.csv
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src31.csv
[Thu May 30 09:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu May 30 09:11:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu May 30 09:11:09 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu May 30 09:11:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:12:00 2013] Warning, spatial fit 31 centroid is now closest to src. 74
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 844.929000, observed total counts = 825.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 38 = 0.766561 pixels
[Thu May 30 09:12:00 2013] Warning, changing simple spatial fit ID from 31 to 63
[Thu May 30 09:12:00 2013] 811.928000 total counts/ 579.676000 bgd. counts: snr = 9.646434
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 0.766561 pixels
  Position = (203.5, 303.6) = 15 3 3.08 -42 8 52.4
  Extent = 24.0 (17.5-33.4)", rotation angle = 0
  Source counts = 232.3 +/- 28.5
  Background counts = 579.7
  Rate = 0.05 +/- 0.007
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:02 2013] XMMSAS src. selection expression = ellipse(17659.825400, 26361.078000, 1438.944041, 1438.944041, 0.000000, X, Y)
[Thu May 30 09:13:02 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src38_src.reg
[Thu May 30 09:13:02 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (121, 221) - (286, 386)
[Thu May 30 09:13:03 2013] XMMSAS bgd. selection expression = annulus(17659.825400, 26361.078000, 2398.240069, 4796.480138, X, Y) && !ellipse(21788.982400, 24175.670000, 1276.624037, 1276.624037, 0.000000, X, Y) && !ellipse(21285.122375, 24832.119385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23771.964000, 25169.722000, 2308.480066, 2308.480066, 0.000000, X, Y) && !ellipse(21005.319458, 25527.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23387.181914, 25028.739085, 1693.488049, 976.497462, 340.356799, X, Y) && !ellipse(22206.278000, 24020.554000, 1252.440036, 1252.440036, 0.000000, X, Y) && !ellipse(16573.045800, 29700.755200, 954.160027, 954.160027, 0.000000, X, Y) && !ellipse(22410.459198, 24923.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17242.294000, 28006.512000, 1591.640046, 1591.640046, 0.000000, X, Y) && !ellipse(17511.484200, 25638.292000, 1592.512046, 1592.512046, 0.000000, X, Y) && !ellipse(20524.106018, 26680.054291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14298.580000, 27275.418000, 1784.472051, 1784.472051, 0.000000, X, Y) && !ellipse(22984.341125, 25972.486328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19356.442000, 23892.697600, 1457.872042, 1457.872042, 0.000000, X, Y) && !ellipse(22216.907562, 27090.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18374.212000, 24128.312000, 1567.256045, 1567.256045, 0.000000, X, Y) && !ellipse(15488.028000, 24896.934000, 3361.520097, 1765.440051, 36.400000, X, Y) && !ellipse(15528.960000, 24657.966000, 1743.064050, 1743.064050, 0.000000, X, Y) && !ellipse(14829.520000, 25722.296000, 1707.536049, 1707.536049, 0.000000, X, Y)
[Thu May 30 09:13:03 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src38.gif
[Thu May 30 09:18:13 2013] Mean detx,y = (1729.85, -8933.75) 
[Thu May 30 09:18:16 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:18:55 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:18:55 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Thu May 30 09:18:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Thu May 30 20:50:31 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:31 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 1062.00
[Thu May 30 20:50:31 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src38_bgd.pi.gz = 1488.00
[Thu May 30 20:50:31 2013] Got source and background scale factors 6406300.000000, 17808546.000000
[Thu May 30 20:50:31 2013] User source parameters:
  Position = (203.5, 303.6) = 15 3 3.08 -42 8 52.4
  Extent = 24.0 (17.5-33.4)", rotation angle = 0
  Source aperture counts = 526.7 +/- 33.6
  Background aperture counts = 535.3
  Rate = 0.1 +/- 0.008

[Thu May 30 20:50:47 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:47 2013] Using photon index=1.80, rate=0.055, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src38.arf
[Thu May 30 20:50:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:47 2013] Updating source flux to 8.8e-13
[Thu May 30 20:51:08 2013] Flag c found in src. 38 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete