[Thu May 30 09:07:45 2013] Detection parameters:
  Position = (342.5, 311.4) = 15 2 8.72 -42 8 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.1 +/- 17.1
  Background counts = 27.6
  Rate = 0.03 +/- 0.004

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 3.33'
[Thu May 30 09:09:02 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Thu May 30 09:09:02 2013] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.987
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 8.09"
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src22.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src22.csv
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src22.csv
[Thu May 30 09:09:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu May 30 09:09:07 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu May 30 09:09:59 2013] Source 36 is offset by -5.426997 and 6.839564 pixels which is larger than
2 X fitted extent = 1.894437 x 1.894437, not incorporating fit results
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 2
[Thu May 30 09:11:03 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Thu May 30 09:11:03 2013] source mask rpix=1.9, npix_max = 22, mask sum = 22, frac = 0.987
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 8.09"
[Thu May 30 09:11:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src20.ximg exists
[Thu May 30 09:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src20.csv
[Thu May 30 09:11:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu May 30 09:11:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src20.csv
[Thu May 30 09:11:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu May 30 09:11:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May 30 09:11:08 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 884.963000, observed total counts = 906.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 36 = 0.472379 pixels
[Thu May 30 09:12:00 2013] 748.937000 total counts/ 684.822000 bgd. counts: snr = 2.450027
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.472379 pixels
  Position = (342.4, 311.9) = 15 2 8.76 -42 8 16.6
  Extent = 6.5 (4.1-9.1)", rotation angle = 0
  Source counts = 64.1 +/- 27.4
  Background counts = 684.8
  Rate = 0.02 +/- 0.006
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:01 2013] XMMSAS src. selection expression = ellipse(29742.153200, 27083.307420, 387.448811, 387.448811, 0.000000, X, Y)
[Thu May 30 09:13:01 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_src.reg
[Thu May 30 09:13:01 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (320, 290) - (365, 334)
[Thu May 30 09:13:01 2013] XMMSAS bgd. selection expression = annulus(29742.153200, 27083.307420, 645.748019, 1291.496037, X, Y) && !ellipse(29029.118000, 26866.981000, 1230.456035, 1230.456035, 0.000000, X, Y) && !ellipse(32245.756000, 29198.812000, 1860.192054, 1860.192054, 0.000000, X, Y) && !ellipse(27765.024000, 26278.602000, 2354.496068, 2354.496068, 0.000000, X, Y) && !ellipse(29561.070000, 27939.426000, 869.352025, 869.352025, 0.000000, X, Y) && !ellipse(26484.832000, 25858.446800, 2109.856061, 2109.856061, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(29536.459595, 28737.826782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(32386.052000, 29401.840000, 1495.352043, 1495.352043, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(30730.128000, 27984.126000, 1430.744041, 1430.744041, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(29172.107269, 28919.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.720000, 28848.420000, 1159.464033, 1159.464033, 0.000000, X, Y)
[Thu May 30 09:13:01 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36.gif
[Thu May 30 09:13:10 2013] ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Thu May 30 09:13:11 2013] Mean detx,y = (-1537.35, 2592.79) 
[Thu May 30 09:13:11 2013] ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_src.img and ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Thu May 30 09:13:11 2013] ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Thu May 30 09:13:11 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Thu May 30 09:13:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Thu May 30 09:13:11 2013] ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Thu May 30 13:25:41 2013] Not generating rmf since there are only 64 counts
[Thu May 30 13:25:41 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:29 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:29 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 235.00
[Thu May 30 20:50:29 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_bgd.pi.gz = 0.00
[Thu May 30 20:50:29 2013] Got source and background scale factors 429892.000000, 0.000000
[Thu May 30 20:50:29 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu May 30 20:50:47 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:47 2013] Using photon index=1.80, rate=0.0152, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36.arf
[Thu May 30 20:50:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:47 2013] Updating source flux to 1.9e-13
[Thu May 30 20:51:08 2013] Flag b found in src. 36 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Flag c found in src. 36 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete