[Thu May 30 09:07:45 2013] Detection parameters:
  Position = (169.4, 316.8) = 15 3 16.41 -42 7 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.5 +/- 12.6
  Background counts = 22.2
  Rate = 0.01 +/- 0.002

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 9.45'
[Thu May 30 09:09:02 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Thu May 30 09:09:02 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 11.15"
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src79.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src79.csv
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src79_1.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src79.csv
[Thu May 30 09:09:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Thu May 30 09:09:09 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Thu May 30 09:09:59 2013] Warning: source 79 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 35 at 15.081843 pixels away
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:11:03 2013] Using EEF radius (= 11.15 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 11.15"
[Thu May 30 09:11:03 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.959
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 11.15"
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src69.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src69.csv
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src69_1.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src69.csv
[Thu May 30 09:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Thu May 30 09:11:12 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 339.184000, observed total counts = 339.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 35 = 5.282487 pixels
[Thu May 30 09:12:00 2013] 351.772000 total counts/ 109.843000 bgd. counts: snr = 23.083504
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 5.282487 pixels
  Position = (164.9, 314.1) = 15 3 18.18 -42 8 6.4
  Extent = 22.3 (22.3-44.6)", rotation angle = 0
  Source counts = 241.9 +/- 18.8
  Background counts = 109.8
  Rate = 0.06 +/- 0.004
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:06 2013] XMMSAS src. selection expression = ellipse(14298.580000, 27275.418000, 1338.354039, 1338.354039, 0.000000, X, Y)
[Thu May 30 09:13:06 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src35_src.reg
[Thu May 30 09:13:06 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (88, 237) - (242, 391)
[Thu May 30 09:13:06 2013] XMMSAS bgd. selection expression = annulus(14298.580000, 27275.418000, 2230.590064, 4461.180128, X, Y) && !ellipse(17659.825400, 26361.078000, 1918.592055, 1918.592055, 0.000000, X, Y) && !ellipse(16573.045800, 29700.755200, 954.160027, 954.160027, 0.000000, X, Y) && !ellipse(17242.294000, 28006.512000, 1591.640046, 1591.640046, 0.000000, X, Y) && !ellipse(17511.484200, 25638.292000, 1592.512046, 1592.512046, 0.000000, X, Y) && !ellipse(19356.442000, 23892.697600, 1457.872042, 1457.872042, 0.000000, X, Y) && !ellipse(18374.212000, 24128.312000, 1567.256045, 1567.256045, 0.000000, X, Y) && !ellipse(15488.028000, 24896.934000, 3361.520097, 1765.440051, 36.400000, X, Y) && !ellipse(15528.960000, 24657.966000, 1743.064050, 1743.064050, 0.000000, X, Y) && !ellipse(14829.520000, 25722.296000, 1707.536049, 1707.536049, 0.000000, X, Y)
[Thu May 30 09:13:06 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src35.gif
[Thu May 30 09:47:57 2013] Mean detx,y = (3748.08, -11831.82) 
[Thu May 30 09:47:59 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:48:12 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:48:13 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Thu May 30 09:48:13 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Thu May 30 20:50:39 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:40 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 838.00
[Thu May 30 20:50:40 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src35_bgd.pi.gz = 2127.00
[Thu May 30 20:50:40 2013] Got source and background scale factors 5645580.000000, 24224540.000000
[Thu May 30 20:50:40 2013] User source parameters:
  Position = (164.9, 314.1) = 15 3 18.18 -42 8 6.4
  Extent = 22.3 (22.3-44.6)", rotation angle = 0
  Source aperture counts = 342.3 +/- 30.0
  Background aperture counts = 495.7
  Rate = 0.08 +/- 0.007

[Thu May 30 20:50:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:48 2013] Using photon index=1.80, rate=0.0573, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src35.arf
[Thu May 30 20:50:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:48 2013] Updating source flux to 1.2e-12
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete