[Thu May 30 09:07:45 2013] Detection parameters:
  Position = (356.1, 327.9) = 15 2 3.42 -42 7 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.3 +/- 16.9
  Background counts = 33.3
  Rate = 0.03 +/- 0.004

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 4.70'
[Thu May 30 09:09:02 2013] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 8.78"
[Thu May 30 09:09:02 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 8.78"
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src34.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src34.csv
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src34_1.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src34.csv
[Thu May 30 09:09:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Thu May 30 09:09:07 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 951.700000, observed total counts = 952.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 30 = 2.121883 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 34 to 18
[Thu May 30 09:09:59 2013] 917.140000 total counts/ 675.447000 bgd. counts: snr = 9.299689
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 2.121883 pixels
  Position = (356.5, 325.8) = 15 2 3.27 -42 7 15.7
  Extent = 17.3 (17.2-34.5)", rotation angle = 0
  Source counts = 241.7 +/- 30.3
  Background counts = 675.4
  Rate = 0.06 +/- 0.007
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 32
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 17.26"
[Thu May 30 09:11:03 2013] source mask rpix=4.0, npix_max = 79, mask sum = 78, frac = 0.976
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 17.26"
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src30.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src30.csv
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src30_1.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src30.csv
[Thu May 30 09:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Thu May 30 09:11:09 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Thu May 30 09:12:00 2013] Warning, spatial fit 30 centroid is now closest to src. 33
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 866.434000, observed total counts = 859.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 30 = 4.518484 pixels
[Thu May 30 09:12:00 2013] Warning, changing simple spatial fit ID from 30 to 37
[Thu May 30 09:12:00 2013] 917.837000 total counts/ 740.235000 bgd. counts: snr = 6.527743
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 4.518484 pixels
  Position = (353.8, 322.2) = 15 2 4.32 -42 7 31.5
  Extent = 17.9 (17.8-35.8)", rotation angle = 0
  Source counts = 177.6 +/- 30.3
  Background counts = 740.2
  Rate = 0.04 +/- 0.007
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:02 2013] XMMSAS src. selection expression = ellipse(30730.128000, 27984.126000, 1073.058031, 1073.058031, 0.000000, X, Y)
[Thu May 30 09:13:02 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src30_src.reg
[Thu May 30 09:13:02 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (292, 261) - (415, 384)
[Thu May 30 09:13:02 2013] XMMSAS bgd. selection expression = annulus(30730.128000, 27984.126000, 1788.430051, 3576.860103, X, Y) && !ellipse(27605.095200, 26328.683600, 798.640023, 798.640023, 0.000000, X, Y) && !ellipse(29029.118000, 26866.981000, 1230.456035, 1230.456035, 0.000000, X, Y) && !ellipse(32245.756000, 29198.812000, 1860.192054, 1860.192054, 0.000000, X, Y) && !ellipse(25783.164000, 25452.801200, 2176.672063, 936.472027, 152.104000, X, Y) && !ellipse(27765.024000, 26278.602000, 2354.496068, 2354.496068, 0.000000, X, Y) && !ellipse(29561.070000, 27939.426000, 869.352025, 869.352025, 0.000000, X, Y) && !ellipse(26393.287800, 26867.564200, 1007.120029, 187.355205, 0.000000, X, Y) && !ellipse(26484.832000, 25858.446800, 2109.856061, 2109.856061, 0.000000, X, Y) && !ellipse(27268.398163, 27017.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(34526.093323, 31878.017548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(33215.132782, 29732.737946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34160.888733, 31251.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(33274.055847, 30655.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29742.153200, 27083.307420, 516.598415, 516.598415, 0.000000, X, Y) && !ellipse(29536.459595, 28737.826782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(32386.052000, 29401.840000, 1495.352043, 1495.352043, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(33858.196808, 31694.549713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34982.014954, 32232.748047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(29172.107269, 28919.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33295.638580, 31934.994476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34018.342000, 32550.280000, 1744.984050, 1744.984050, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(27735.720000, 28848.420000, 1159.464033, 1159.464033, 0.000000, X, Y) && !ellipse(28947.842255, 29752.913513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27134.252808, 28656.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.848389, 30739.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29053.386000, 31316.243000, 832.144024, 832.144024, 0.000000, X, Y) && !ellipse(29993.522888, 30122.347565, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:02 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src30.gif
[Thu May 30 09:17:46 2013] Mean detx,y = (-853.98, 3777.40) 
[Thu May 30 09:17:49 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:18:09 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:18:09 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu May 30 09:18:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu May 30 20:50:31 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:31 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src30_src_b10.pi.gz = 1561.00
[Thu May 30 20:50:31 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src30_bgd.pi.gz = 227.00
[Thu May 30 20:50:31 2013] Got source and background scale factors 3480480.000000, 3521115.000000
[Thu May 30 20:50:31 2013] User source parameters:
  Position = (353.8, 322.2) = 15 2 4.32 -42 7 31.5
  Extent = 17.9 (17.8-35.8)", rotation angle = 0
  Source aperture counts = 1336.6 +/- 40.5
  Background aperture counts = 224.4
  Rate = 0.3 +/- 0.01

[Thu May 30 20:50:47 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:47 2013] Using photon index=1.80, rate=0.042, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src30.arf
[Thu May 30 20:50:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:47 2013] Updating source flux to 4.6e-13
[Thu May 30 20:51:08 2013] Flag c found in src. 30 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete