[Thu May 30 09:07:45 2013] Detection parameters:
  Position = (372.0, 339.9) = 15 1 57.20 -42 6 13.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.2 +/- 17.2
  Background counts = 28.8
  Rate = 0.03 +/- 0.004

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 6.12'
[Thu May 30 09:09:02 2013] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 9.49"
[Thu May 30 09:09:02 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.251
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 9.49"
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src28.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src28.csv
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src28.csv
[Thu May 30 09:09:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu May 30 09:09:07 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu May 30 09:09:59 2013] Warning, spatial fit 28 centroid is now closest to src. 6
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 912.616000, observed total counts = 911.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 27 = 2.271959 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 28 to 75
[Thu May 30 09:09:59 2013] 804.244000 total counts/ 693.657000 bgd. counts: snr = 4.198863
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.271959 pixels
  Position = (370.2, 338.5) = 15 1 57.90 -42 6 20.6
  Extent = 18.7 (18.7-37.4)", rotation angle = 0
  Source counts = 110.6 +/- 28.4
  Background counts = 693.7
  Rate = 0.03 +/- 0.007
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 6
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 18.69"
[Thu May 30 09:11:03 2013] source mask rpix=4.3, npix_max = 92, mask sum = 90, frac = 0.978
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 24 for pass 1, mean size = 18.69"
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src24.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src24.csv
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src24_1.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src24.csv
[Thu May 30 09:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Thu May 30 09:11:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Thu May 30 09:11:08 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Thu May 30 09:12:00 2013] Warning, spatial fit 24 centroid is now closest to src. 73
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 910.823000, observed total counts = 911.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 27 = 2.577082 pixels
[Thu May 30 09:12:00 2013] Warning, changing simple spatial fit ID from 24 to 67
[Thu May 30 09:12:00 2013] 892.339000 total counts/ 788.043000 bgd. counts: snr = 3.715290
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 2.577082 pixels
  Position = (372.8, 338.5) = 15 1 56.89 -42 6 20.6
  Extent = 18.7 (18.7-37.4)", rotation angle = 0
  Source counts = 104.3 +/- 29.9
  Background counts = 788.0
  Rate = 0.02 +/- 0.007
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:02 2013] XMMSAS src. selection expression = ellipse(32386.052000, 29401.840000, 1121.514032, 1121.514032, 0.000000, X, Y)
[Thu May 30 09:13:02 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_src.reg
[Thu May 30 09:13:02 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (308, 274) - (437, 403)
[Thu May 30 09:13:02 2013] XMMSAS bgd. selection expression = annulus(32386.052000, 29401.840000, 1869.190054, 3738.380108, X, Y) && !ellipse(29029.118000, 26866.981000, 1230.456035, 1230.456035, 0.000000, X, Y) && !ellipse(32245.756000, 29198.812000, 1860.192054, 1860.192054, 0.000000, X, Y) && !ellipse(27765.024000, 26278.602000, 2354.496068, 2354.496068, 0.000000, X, Y) && !ellipse(29561.070000, 27939.426000, 869.352025, 869.352025, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(34526.093323, 31878.017548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.256000, 27539.126000, 2239.144064, 2239.144064, 0.000000, X, Y) && !ellipse(33215.132782, 29732.737946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34160.888733, 31251.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30744.060000, 28125.372000, 1382.224040, 1382.224040, 0.000000, X, Y) && !ellipse(32086.619705, 28785.778546, 2176.672063, 719.949240, 134.012006, X, Y) && !ellipse(33274.055847, 30655.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29742.153200, 27083.307420, 516.598415, 516.598415, 0.000000, X, Y) && !ellipse(29536.459595, 28737.826782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29955.604000, 27731.322000, 2762.304079, 2762.304079, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(33858.196808, 31694.549713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34339.768677, 32587.186493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30730.128000, 27984.126000, 1430.744041, 1430.744041, 0.000000, X, Y) && !ellipse(34982.014954, 32232.748047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30370.792000, 29073.240000, 1365.440039, 1365.440039, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(29172.107269, 28919.454681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33295.638580, 31934.994476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34018.342000, 32550.280000, 1744.984050, 1744.984050, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(35970.540771, 32417.952271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.490845, 33054.492889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35815.733978, 32922.482178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.720000, 28848.420000, 1159.464033, 1159.464033, 0.000000, X, Y) && !ellipse(36054.938400, 32714.692000, 1745.112050, 1745.112050, 0.000000, X, Y) && !ellipse(28947.842255, 29752.913513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31527.848389, 30739.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29053.386000, 31316.243000, 832.144024, 832.144024, 0.000000, X, Y) && !ellipse(29993.522888, 30122.347565, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:02 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27.gif
[Thu May 30 09:13:11 2013] ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0111090301/products/events/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create
[Thu May 30 09:13:11 2013] Mean detx,y = (-213.35, 5739.97) 
[Thu May 30 09:13:11 2013] ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_src.img and ../../xmm0111090301/products/images/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create
[Thu May 30 09:13:11 2013] ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_src_b10.pi.gz and ../../xmm0111090301/products/spectra/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create
[Thu May 30 09:13:11 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu May 30 09:13:11 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Thu May 30 09:13:11 2013] ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0111090301/products/lightcurves/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create
[Thu May 30 20:50:30 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:30 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 1564.00
[Thu May 30 20:50:30 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_bgd.pi.gz = 231.00
[Thu May 30 20:50:30 2013] Got source and background scale factors 3536412.000000, 3056881.000000
[Thu May 30 20:50:30 2013] User source parameters:
  Position = (372.8, 338.5) = 15 1 56.89 -42 6 20.6
  Extent = 18.7 (18.7-37.4)", rotation angle = 0
  Source aperture counts = 1296.8 +/- 40.6
  Background aperture counts = 267.2
  Rate = 0.3 +/- 0.01

[Thu May 30 20:50:47 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:47 2013] Using photon index=1.80, rate=0.0247, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27.arf
[Thu May 30 20:50:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:47 2013] Updating source flux to 3e-13
[Thu May 30 20:51:08 2013] Flag c found in src. 27 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete