[Thu May 30 09:07:44 2013] Detection parameters:
  Position = (423.8, 412.0) = 15 1 37.04 -42 1 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.4 +/- 13.1
  Background counts = 26.8
  Rate = 0.03 +/- 0.005

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 12.26'
[Thu May 30 09:09:02 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Thu May 30 09:09:02 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 12.56"
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src37.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src37.csv
[Thu May 30 09:09:04 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu May 30 09:09:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src37.csv
[Thu May 30 09:09:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu May 30 09:09:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu May 30 09:09:07 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Thu May 30 09:09:59 2013] Warning, spatial fit 37 centroid is now closest to src. 17
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 46
[Thu May 30 09:09:59 2013] Source is confused with source 45
[Thu May 30 09:11:03 2013] Using EEF radius (= 12.56 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 12.56"
[Thu May 30 09:11:03 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.915
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 12.56"
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src33.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src33.csv
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src33_1.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src33.csv
[Thu May 30 09:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Thu May 30 09:11:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Thu May 30 09:11:09 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Thu May 30 09:12:00 2013] Warning, spatial fit 33 centroid is now closest to src. 46
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 473.144000, observed total counts = 473.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 19 = 0.794643 pixels
[Thu May 30 09:12:00 2013] Warning, changing simple spatial fit ID from 33 to 45
[Thu May 30 09:12:00 2013] 443.328000 total counts/ 217.336000 bgd. counts: snr = 15.329473
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.794643 pixels
  Position = (423.8, 412.8) = 15 1 37.01 -42 0 56.9
  Extent = 22.5 (18.1-24.6)", rotation angle = 0
  Source counts = 226.0 +/- 21.1
  Background counts = 217.3
  Rate = 0.05 +/- 0.005
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:03 2013] XMMSAS src. selection expression = ellipse(36825.450000, 35866.668000, 1349.916039, 1349.916039, 0.000000, X, Y)
[Thu May 30 09:13:03 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src19_src.reg
[Thu May 30 09:13:03 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (346, 335) - (501, 490)
[Thu May 30 09:13:03 2013] XMMSAS bgd. selection expression = annulus(36825.450000, 35866.668000, 2249.860065, 4499.720129, X, Y) && !ellipse(34526.093323, 31878.017548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34160.888733, 31251.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33274.055847, 30655.535858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33633.898000, 31269.344000, 3489.968100, 3489.968100, 0.000000, X, Y) && !ellipse(33858.196808, 31694.549713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34339.768677, 32587.186493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34982.014954, 32232.748047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31640.628000, 28627.280000, 2965.360085, 2965.360085, 0.000000, X, Y) && !ellipse(33295.638580, 31934.994476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36372.822845, 35438.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34018.342000, 32550.280000, 1744.984050, 1744.984050, 0.000000, X, Y) && !ellipse(31915.352000, 30948.542000, 1521.960044, 1521.960044, 0.000000, X, Y) && !ellipse(35970.540771, 32417.952271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.490845, 33054.492889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35815.733978, 32922.482178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38115.836000, 35027.416000, 1678.712048, 1678.712048, 0.000000, X, Y) && !ellipse(37624.208000, 37361.238000, 2101.616060, 2101.616060, 0.000000, X, Y) && !ellipse(36054.938400, 32714.692000, 1745.112050, 1745.112050, 0.000000, X, Y) && !ellipse(31527.848389, 30739.859589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37818.588000, 37777.398000, 1185.000034, 1185.000034, 0.000000, X, Y) && !ellipse(36907.792664, 36366.692383, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:03 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src19.gif
[Thu May 30 09:19:27 2013] Mean detx,y = (4444.29, 12222.74) 
[Thu May 30 09:19:29 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:20:31 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:20:32 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu May 30 09:20:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu May 30 20:50:31 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:31 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src19_src_b10.pi.gz = 1107.00
[Thu May 30 20:50:32 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src19_bgd.pi.gz = 2309.00
[Thu May 30 20:50:32 2013] Got source and background scale factors 5453196.000000, 22705580.000000
[Thu May 30 20:50:32 2013] User source parameters:
  Position = (423.8, 412.8) = 15 1 37.01 -42 0 56.9
  Extent = 22.5 (18.1-24.6)", rotation angle = 0
  Source aperture counts = 552.4 +/- 34.3
  Background aperture counts = 554.6
  Rate = 0.1 +/- 0.008

[Thu May 30 20:50:47 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:47 2013] Using photon index=1.80, rate=0.0535, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src19.arf
[Thu May 30 20:50:47 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:47 2013] Updating source flux to 9.4e-13
[Thu May 30 20:51:08 2013] Flag c found in src. 19 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete