[Thu May 30 09:07:51 2013] Detection parameters:
  Position = (438.5, 440.6) = 15 1 31.32 -41 59 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.3 +/- 13.7
  Background counts = 22.9
  Rate = 0.01 +/- 0.003

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 14.47'
[Thu May 30 09:09:02 2013] Using EEF radius (= 13.66 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 13.66"
[Thu May 30 09:09:02 2013] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.924
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 96 for pass 0, mean size = 13.66"
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src96.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src96.csv
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src96_1.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src96.csv
[Thu May 30 09:09:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src96.ximg exists
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src96_1.ximg exists
[Thu May 30 09:09:09 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src96 appears to have run properly
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 486.870000, observed total counts = 484.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 111 = 6.678813 pixels
[Thu May 30 09:09:59 2013] 481.149000 total counts/ 350.556000 bgd. counts: snr = 6.974952
Spatial fit parameters:
  Offset between fit and detection position for source 111 = 6.678813 pixels
  Position = (435.3, 434.8) = 15 1 32.58 -41 59 21.2
  Extent = 14.8 (8.8-27.3)", rotation angle = 0
  Source counts = 130.6 +/- 21.9
  Background counts = 350.6
  Rate = 0.03 +/- 0.005
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 43
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 14.81"
[Thu May 30 09:11:03 2013] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.049
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 82 for pass 1, mean size = 14.81"
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src82.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src82.csv
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src82_1.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src82.csv
[Thu May 30 09:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Thu May 30 09:11:12 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly
[Thu May 30 09:12:00 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 111 at 12.720246 pixels away
[Thu May 30 09:12:00 2013] Warning, spatial fit 82 centroid is now closest to src. 45
[Thu May 30 09:12:00 2013] Source 111 is offset by -0.445632 and 9.324161 pixels which is larger than
2 X fitted extent = 6.735265 x 6.735265, not incorporating fit results
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:08 2013] XMMSAS src. selection expression = ellipse(37818.588000, 37777.398000, 888.750026, 888.750026, 0.000000, X, Y)
[Thu May 30 09:13:08 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src111_src.reg
[Thu May 30 09:13:08 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (384, 384) - (486, 486)
[Thu May 30 09:13:08 2013] XMMSAS bgd. selection expression = annulus(37818.588000, 37777.398000, 1481.250043, 2962.500085, X, Y) && !ellipse(36825.450000, 35866.668000, 1799.888052, 1799.888052, 0.000000, X, Y) && !ellipse(36372.822845, 35438.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38115.836000, 35027.416000, 1678.712048, 1678.712048, 0.000000, X, Y) && !ellipse(37624.208000, 37361.238000, 2101.616060, 2101.616060, 0.000000, X, Y) && !ellipse(36907.792664, 36366.692383, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 09:13:08 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src111.gif
[Thu May 30 09:52:39 2013] Mean detx,y = (5852.58, 13702.40) 
[Thu May 30 09:52:42 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:53:05 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:53:05 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src111_src_b10.pi.gz
[Thu May 30 09:53:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src111_bgd.pi.gz
[Thu May 30 20:50:43 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:43 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src111_src_b10.pi.gz = 514.00
[Thu May 30 20:50:43 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src111_bgd.pi.gz = 670.00
[Thu May 30 20:50:43 2013] Got source and background scale factors 2420724.000000, 6571792.000000
[Thu May 30 20:50:43 2013] User source parameters:
  Position = (435.3, 434.8) = 15 1 32.58 -41 59 21.2
  Extent = 14.8 (8.8-27.3)", rotation angle = 0
  Source aperture counts = 267.2 +/- 23.7
  Background aperture counts = 246.8
  Rate = 0.06 +/- 0.006

[Thu May 30 20:50:49 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:49 2013] Using photon index=1.80, rate=0.0309, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src111.arf
[Thu May 30 20:50:49 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:49 2013] Updating source flux to 6.8e-13
[Thu May 30 20:51:08 2013] Flag b found in src. 111 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Flag c found in src. 111 procflags, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src111_pl.csv not found, spectral fit skipped or did not complete