[Thu May 30 09:07:51 2013] Detection parameters:
  Position = (223.9, 279.7) = 15 2 55.11 -42 10 35.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.6 +/- 9.9
  Background counts = 13.0
  Rate = 0.01 +/- 0.003

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 5.57'
[Thu May 30 09:09:02 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Thu May 30 09:09:02 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.094
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 9.21"
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src83.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src83.csv
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src83_1.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src83.csv
[Thu May 30 09:09:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Thu May 30 09:09:09 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Thu May 30 09:09:59 2013] Warning, spatial fit 83 centroid is now closest to src. 44
[Thu May 30 09:09:59 2013] Source 109 is offset by 1.203906 and -4.880421 pixels which is larger than
2 X fitted extent = 1.094722 x 1.094722, not incorporating fit results
[Thu May 30 09:09:59 2013] Source 109 is offset by 4.992573 and -6.219478 pixels which is larger than
2 X fitted extent = 2.257830 x 2.257830, not incorporating fit results
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 206.721000, observed total counts = 208.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 109 = 4.630791 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 83 to 98
[Thu May 30 09:09:59 2013] 216.241900 total counts/ 123.725000 bgd. counts: snr = 8.317491
Spatial fit parameters:
  Offset between fit and detection position for source 109 = 4.630791 pixels
  Position = (223.0, 275.2) = 15 2 55.46 -42 10 56.0
  Extent = 18.2 (18.2-36.4)", rotation angle = 0
  Source counts = 92.5 +/- 14.7
  Background counts = 123.7
  Rate = 0.02 +/- 0.003
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 47
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 18.22"
[Thu May 30 09:11:03 2013] source mask rpix=4.2, npix_max = 87, mask sum = 100, frac = 1.137
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 73 for pass 1, mean size = 18.22"
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src73.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src73.csv
[Thu May 30 09:11:07 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src73_1.ximg exists
[Thu May 30 09:11:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src73.csv
[Thu May 30 09:11:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src73.ximg exists
[Thu May 30 09:11:12 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists
[Thu May 30 09:11:12 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src73 appears to have run properly
[Thu May 30 09:12:00 2013] Warning, spatial fit 73 centroid is now closest to src. 108
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:07 2013] XMMSAS src. selection expression = ellipse(19356.442000, 23892.697600, 1093.404031, 1093.404031, 0.000000, X, Y)
[Thu May 30 09:13:07 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src109_src.reg
[Thu May 30 09:13:07 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (160, 212) - (286, 338)
[Thu May 30 09:13:07 2013] XMMSAS bgd. selection expression = annulus(19356.442000, 23892.697600, 1822.340052, 3644.680105, X, Y) && !ellipse(23353.250092, 25048.528600, 788.340023, 788.340023, 0.000000, X, Y) && !ellipse(21788.982400, 24175.670000, 1276.624037, 1276.624037, 0.000000, X, Y) && !ellipse(17659.825400, 26361.078000, 1918.592055, 1918.592055, 0.000000, X, Y) && !ellipse(21285.122375, 24832.119385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23771.964000, 25169.722000, 2308.480066, 2308.480066, 0.000000, X, Y) && !ellipse(21005.319458, 25527.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23387.181914, 25028.739085, 1693.488049, 976.497462, 340.356799, X, Y) && !ellipse(22206.278000, 24020.554000, 1252.440036, 1252.440036, 0.000000, X, Y) && !ellipse(22410.459198, 24923.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17242.294000, 28006.512000, 1591.640046, 1591.640046, 0.000000, X, Y) && !ellipse(17511.484200, 25638.292000, 1592.512046, 1592.512046, 0.000000, X, Y) && !ellipse(20524.106018, 26680.054291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14298.580000, 27275.418000, 1784.472051, 1784.472051, 0.000000, X, Y) && !ellipse(22984.341125, 25972.486328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22216.907562, 27090.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.076874, 26656.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18374.212000, 24128.312000, 1567.256045, 1567.256045, 0.000000, X, Y) && !ellipse(15488.028000, 24896.934000, 3361.520097, 1765.440051, 36.400000, X, Y) && !ellipse(15528.960000, 24657.966000, 1743.064050, 1743.064050, 0.000000, X, Y) && !ellipse(14829.520000, 25722.296000, 1707.536049, 1707.536049, 0.000000, X, Y)
[Thu May 30 09:13:07 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src109.gif
[Thu May 30 09:49:26 2013] Mean detx,y = (-993.32, -8172.90) 
[Thu May 30 09:49:29 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:49:54 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:49:54 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src109_src_b10.pi.gz
[Thu May 30 09:49:54 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src109_bgd.pi.gz
[Thu May 30 15:57:54 2013] Not generating rmf since there are only 92 counts
[Thu May 30 15:57:54 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:40 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:40 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src109_src_b10.pi.gz = 385.00
[Thu May 30 20:50:40 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src109_bgd.pi.gz = 395.00
[Thu May 30 20:50:41 2013] Got source and background scale factors 3768000.000000, 12090425.000000
[Thu May 30 20:50:41 2013] User source parameters:
  Position = (223.0, 275.2) = 15 2 55.46 -42 10 56.0
  Extent = 18.2 (18.2-36.4)", rotation angle = 0
  Source aperture counts = 261.9 +/- 20.6
  Background aperture counts = 123.1
  Rate = 0.06 +/- 0.005

[Thu May 30 20:50:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:48 2013] Using photon index=1.80, rate=0.0219, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src109.arf
[Thu May 30 20:50:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:48 2013] Updating source flux to 3.4e-13
[Thu May 30 20:51:08 2013] Flag b found in src. 109 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Flag c found in src. 109 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Source 109 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src109_pl.csv not found, spectral fit skipped or did not complete