[Thu May 30 09:07:51 2013] Detection parameters:
  Position = (250.2, 282.9) = 15 2 44.84 -42 10 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64.2 +/- 12.9
  Background counts = 17.0
  Rate = 0.02 +/- 0.003

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 3.68'
[Thu May 30 09:09:02 2013] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 8.27"
[Thu May 30 09:09:02 2013] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.085
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 8.27"
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src59.ximg exists
[Thu May 30 09:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src59.csv
[Thu May 30 09:09:05 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src59_1.ximg exists
[Thu May 30 09:09:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src59.csv
[Thu May 30 09:09:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src59.ximg exists
[Thu May 30 09:09:08 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists
[Thu May 30 09:09:08 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src59 appears to have run properly
[Thu May 30 09:09:59 2013] Spatial fit model total counts = 554.061000, observed total counts = 552.000000
[Thu May 30 09:09:59 2013] Offset between fit and detection position for source 106 = 9.053714 pixels
[Thu May 30 09:09:59 2013] Warning, changing simple spatial fit ID from 59 to 47
[Thu May 30 09:09:59 2013] 582.159400 total counts/ 534.687000 bgd. counts: snr = 2.053011
Spatial fit parameters:
  Offset between fit and detection position for source 106 = 9.053714 pixels
  Position = (255.8, 275.8) = 15 2 42.65 -42 10 53.5
  Extent = 15.7 (15.6-31.3)", rotation angle = 0
  Source counts = 47.5 +/- 24.1
  Background counts = 534.7
  Rate = 0.01 +/- 0.006
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Source is confused with source 22
[Thu May 30 09:11:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 30 09:11:03 2013] Initial guess for spatial extent in simple fitting = 15.66"
[Thu May 30 09:11:03 2013] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.952
[Thu May 30 09:11:03 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 15.66"
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src52.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src52.csv
[Thu May 30 09:11:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src52_1.ximg exists
[Thu May 30 09:11:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src52.csv
[Thu May 30 09:11:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:11:11 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Thu May 30 09:11:11 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Thu May 30 09:11:11 2013] Fit fullrun_mos1_xmm0111090301_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Thu May 30 09:12:00 2013] Spatial fit model total counts = 552.620000, observed total counts = 552.000000
[Thu May 30 09:12:00 2013] Offset between fit and detection position for source 106 = 0.853747 pixels
[Thu May 30 09:12:00 2013] Warning, changing simple spatial fit ID from 52 to 43
[Thu May 30 09:12:00 2013] 571.321000 total counts/ 517.188000 bgd. counts: snr = 2.380334
Spatial fit parameters:
  Offset between fit and detection position for source 106 = 0.853747 pixels
  Position = (255.8, 276.7) = 15 2 42.64 -42 10 49.8
  Extent = 15.7 (15.6-31.3)", rotation angle = 0
  Source counts = 54.1 +/- 23.9
  Background counts = 517.2
  Rate = 0.01 +/- 0.006
[Thu May 30 09:12:00 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:12:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:12:00 2013] Assessing source extent using major axis lower bound
[Thu May 30 09:12:00 2013] Source does appear to be extended
[Thu May 30 09:12:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:13:05 2013] XMMSAS src. selection expression = ellipse(22206.278000, 24020.554000, 939.330027, 939.330027, 0.000000, X, Y)
[Thu May 30 09:13:05 2013] Not overwriting source region fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src106_src.reg
[Thu May 30 09:13:05 2013] Extracting stamp from image fullrun_mos1_xmm0111090301_pi300-10000_cl_sm2.00.img.gz, (202, 223) - (310, 331)
[Thu May 30 09:13:05 2013] XMMSAS bgd. selection expression = annulus(22206.278000, 24020.554000, 1565.550045, 3131.100090, X, Y) && !ellipse(25783.164000, 25452.801200, 2176.672063, 936.472027, 152.104000, X, Y) && !ellipse(26055.625800, 25554.774400, 1054.928030, 1054.928030, 0.000000, X, Y) && !ellipse(26484.832000, 25858.446800, 2109.856061, 2109.856061, 0.000000, X, Y) && !ellipse(26907.620000, 26004.544000, 2185.504063, 2185.504063, 0.000000, X, Y) && !ellipse(24059.562800, 25613.310000, 746.853621, 746.853621, 0.000000, X, Y) && !ellipse(23353.250092, 25048.528600, 788.340023, 788.340023, 0.000000, X, Y) && !ellipse(21788.982400, 24175.670000, 1276.624037, 1276.624037, 0.000000, X, Y) && !ellipse(17659.825400, 26361.078000, 1918.592055, 1918.592055, 0.000000, X, Y) && !ellipse(25390.256989, 25970.418060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21285.122375, 24832.119385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24201.607000, 24580.728000, 1151.840033, 1151.840033, 0.000000, X, Y) && !ellipse(23771.964000, 25169.722000, 2308.480066, 2308.480066, 0.000000, X, Y) && !ellipse(21005.319458, 25527.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25385.122162, 26643.345856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23387.181914, 25028.739085, 1693.488049, 976.497462, 340.356799, X, Y) && !ellipse(22410.459198, 24923.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24868.360535, 25878.408020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17511.484200, 25638.292000, 1592.512046, 1592.512046, 0.000000, X, Y) && !ellipse(24834.307129, 24694.503906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20524.106018, 26680.054291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22984.341125, 25972.486328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19356.442000, 23892.697600, 1457.872042, 1457.872042, 0.000000, X, Y) && !ellipse(22216.907562, 27090.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23367.076874, 26656.427185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.912811, 26409.018280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18374.212000, 24128.312000, 1567.256045, 1567.256045, 0.000000, X, Y)
[Thu May 30 09:13:05 2013] Writing fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src106.gif
[Thu May 30 09:40:26 2013] Mean detx,y = (-1761.37, -5472.42) 
[Thu May 30 09:40:29 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 30 09:40:51 2013] Binned source spectrum to 10 counts/bin
[Thu May 30 09:40:51 2013] Setting source spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Thu May 30 09:40:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src106_bgd.pi.gz
[Thu May 30 15:20:30 2013] Not generating rmf since there are only 54 counts
[Thu May 30 15:20:30 2013] rmf not generated due to insufficient counts
[Thu May 30 20:50:35 2013] Updating aperture counts using extracted products
[Thu May 30 20:50:36 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src106_src_b10.pi.gz = 535.00
[Thu May 30 20:50:36 2013] Total counts from fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src106_bgd.pi.gz = 315.00
[Thu May 30 20:50:36 2013] Got source and background scale factors 2787200.000000, 7799168.000000
[Thu May 30 20:50:36 2013] User source parameters:
  Position = (255.8, 276.7) = 15 2 42.64 -42 10 49.8
  Extent = 15.7 (15.6-31.3)", rotation angle = 0
  Source aperture counts = 422.4 +/- 24.1
  Background aperture counts = 112.6
  Rate = 0.1 +/- 0.006

[Thu May 30 20:50:48 2013] Calculating source flux in energy range 0.30-8.00
[Thu May 30 20:50:48 2013] Using photon index=1.80, rate=0.0128, arf fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src106.arf
[Thu May 30 20:50:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu May 30 20:50:48 2013] Updating source flux to 1.7e-13
[Thu May 30 20:51:08 2013] Flag c found in src. 106 procflags, skipping spectral fitting
[Thu May 30 20:51:08 2013] Source 106 has fewer than 100.000000 counts, skipping spectral fitting
[Thu May 30 20:51:40 2013] xmm0111090301/analysis//spectral/fullrun_mos1_xmm0111090301_pi300-10000_pass1_cl_src106_pl.csv not found, spectral fit skipped or did not complete