[Thu May 30 09:07:51 2013] Detection parameters:
  Position = (228.3, 287.1) = 15 2 53.41 -42 10 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 36.7 +/- 9.7
  Background counts = 16.0
  Rate = 0.01 +/- 0.003

[Thu May 30 09:07:51 2013] Off-axis axis estimate = 5.15'
[Thu May 30 09:09:02 2013] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Thu May 30 09:09:02 2013] Initial guess for spatial extent in simple fitting = 9.00"
[Thu May 30 09:09:02 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.946
[Thu May 30 09:09:02 2013] Giving source the simple spatial ID 93 for pass 0, mean size = 9.00"
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src93.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src93.csv
[Thu May 30 09:09:06 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src93_1.ximg exists
[Thu May 30 09:09:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src93.csv
[Thu May 30 09:09:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Thu May 30 09:09:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src93.csv
[Thu May 30 09:09:09 2013] fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Thu May 30 09:09:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src93.csv
[Thu May 30 09:09:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090301_pi300-10000_cl_pass0_tfrozen_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 09:09:59 2013] Source 102 is offset by 2.253771 and -0.518489 pixels which is larger than
2 X fitted extent = 1.035002 x 1.035002, not incorporating fit results
[Thu May 30 09:09:59 2013] Vigneting correction estimate = 1.000000
[Thu May 30 09:09:59 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 09:09:59 2013] Assessing source extent using major
[Thu May 30 09:09:59 2013] Source does appear to be extended
[Thu May 30 09:09:59 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 09:09:59 2013] Deleting source due to low Poisson probability 0.9