[Sun Sep  2 10:32:13 2012] Detection parameters:
  Position = (414.4, 398.0) = 15 3 9.17 -41 41 11.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.1 +/- 15.8
  Background counts = 20.1
  Rate = 0.04 +/- 0.005

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 11.08'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 11.97"
[Sun Sep  2 10:36:30 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.993
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 65 for pass 0, mean size = 11.97"
[Sun Sep  2 17:27:57 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src65.ximg exists
[Sun Sep  2 17:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src65.csv
[Sun Sep  2 17:27:57 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sun Sep  2 17:27:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src65.csv
[Sun Sep  2 17:27:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:28:00 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sun Sep  2 17:28:00 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sun Sep  2 17:28:00 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 918.186000, observed total counts = 918.000000
[Mon Sep  3 04:47:06 2012] Offset between fit and detection position for source 65 = 1.554156 pixels
[Mon Sep  3 04:47:06 2012] Warning, changing simple spatial fit ID from 65 to 64
[Mon Sep  3 04:47:06 2012] 817.083000 total counts/ 317.346000 bgd. counts: snr = 28.052721
Spatial fit parameters:
  Offset between fit and detection position for source 65 = 1.554156 pixels
  Position = (414.3, 399.6) = 15 3 9.25 -41 41 5.2
  Extent = 23.5 (21.8-47.0)", rotation angle = 0
  Source counts = 499.7 +/- 28.6
  Background counts = 317.3
  Rate = 0.1 +/- 0.008
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:07 2012] Source is confused with source 43
[Mon Sep  3 04:48:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 23.48"
[Mon Sep  3 04:48:01 2012] source mask rpix=5.4, npix_max = 139, mask sum = 132, frac = 0.949
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 60 for pass 1, mean size = 23.48"
[Mon Sep  3 10:59:46 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src60.ximg exists
[Mon Sep  3 10:59:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src60.csv
[Mon Sep  3 10:59:46 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src60_1.ximg exists
[Mon Sep  3 10:59:46 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src60.csv
[Mon Sep  3 10:59:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:59:49 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Mon Sep  3 10:59:49 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Mon Sep  3 10:59:49 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Tue Sep  4 01:00:02 2012] Warning, spatial fit 60 centroid is now closest to src. 85
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:01:17 2012] XMMSAS src. selection expression = ellipse(35991.280000, 34713.276000, 1408.950041, 1408.950041, 0.000000, X, Y)
[Tue Sep  4 01:01:17 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src65_src.reg
[Tue Sep  4 01:01:17 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (333, 319) - (495, 481)
[Tue Sep  4 01:01:17 2012] XMMSAS bgd. selection expression = annulus(35991.280000, 34713.276000, 2348.250068, 4696.500135, X, Y) && !ellipse(30488.746000, 33185.708000, 3437.968099, 3437.968099, 0.000000, X, Y) && !ellipse(32034.978000, 33546.486000, 850.904024, 850.904024, 0.000000, X, Y) && !ellipse(31502.480000, 33223.230000, 2522.368073, 504.972815, 166.874000, X, Y) && !ellipse(33923.722931, 33708.365540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32601.706848, 33698.069336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34768.816101, 34224.489960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36511.621400, 34618.486000, 1371.160039, 1371.160039, 0.000000, X, Y) && !ellipse(33705.962738, 34299.096283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31276.244000, 32843.148000, 1367.848039, 1367.848039, 0.000000, X, Y) && !ellipse(31363.608276, 32145.928589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35154.554000, 34415.227600, 1838.016053, 1838.016053, 0.000000, X, Y) && !ellipse(34337.050000, 33818.928000, 2154.040062, 2154.040062, 0.000000, X, Y) && !ellipse(32306.664062, 32305.153351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32127.871735, 34306.028564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33964.445770, 33026.615082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36597.048035, 33040.275208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35175.992000, 32858.638000, 1839.416053, 1839.416053, 0.000000, X, Y) && !ellipse(32341.606903, 33027.501862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35730.685425, 33098.351318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33263.738403, 32736.675262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31850.998000, 32388.142000, 1261.184036, 1261.184036, 0.000000, X, Y) && !ellipse(34598.732269, 32501.158234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33488.194580, 32044.896759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30905.801575, 32156.609772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32362.584600, 31921.386000, 1631.064047, 1631.064047, 0.000000, X, Y) && !ellipse(38057.638062, 31545.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36162.480804, 31619.215912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32174.286957, 31473.191956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35052.529877, 31455.551941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31631.468872, 31454.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.469460, 31470.754000, 1549.904045, 1549.904045, 0.000000, X, Y) && !ellipse(37031.341797, 30293.124359, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:01:17 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src65.gif
[Tue Sep  4 01:34:10 2012] Mean detx,y = (11307.32, -2947.07) 
[Tue Sep  4 01:34:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:35:10 2012] grppha failed
[Tue Sep  4 01:35:10 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src65_src.pi.gz
[Tue Sep  4 01:35:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Tue Sep  4 04:29:58 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src65_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Flag c found in src. 65 procflags, skipping spectral fitting
[Tue Sep  4 04:30:08 2012] Source 65 has no response, skipping
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src65_pl.csv not found, spectral fit skipped or did not complete