[Sun Sep  2 10:32:13 2012] Detection parameters:
  Position = (322.9, 333.9) = 15 3 44.70 -41 45 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.3 +/- 26.3
  Background counts = 166.0
  Rate = 0.09 +/- 0.01

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 3.13'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Sun Sep  2 10:36:30 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.732
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 7.99"
[Sun Sep  2 17:27:57 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src48.ximg exists
[Sun Sep  2 17:27:57 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun Sep  2 17:27:57 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src48 appears to have run properly
[Sun Sep  2 17:28:00 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun Sep  2 17:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun Sep  2 17:28:00 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun Sep  2 17:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src48.csv
[Sun Sep  2 17:28:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 3031.260000, observed total counts = 2505.000000
[Mon Sep  3 04:47:06 2012] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:06 2012] Source 48 is offset by -7.418840 and 1.689045 pixels which is larger than
2 X fitted extent = 7.348230 x 7.348230, not incorporating fit results
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:48:01 2012] Using EEF radius (= 7.99 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 7.99"
[Mon Sep  3 04:48:01 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.732
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 7.99"
[Mon Sep  3 10:59:46 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src45.ximg exists
[Mon Sep  3 10:59:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src45.csv
[Mon Sep  3 10:59:46 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src45_1.ximg exists
[Mon Sep  3 10:59:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src45.csv
[Mon Sep  3 10:59:46 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Mon Sep  3 10:59:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Mon Sep  3 10:59:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src45.csv
[Mon Sep  3 10:59:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:02 2012] Spatial fit model total counts = 3034.790000, observed total counts = 2505.000000
[Tue Sep  4 01:00:02 2012] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 01:00:02 2012] Spatial fit model total counts = 2835.450000, observed total counts = 2274.000000
[Tue Sep  4 01:00:02 2012] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:01:17 2012] XMMSAS src. selection expression = ellipse(28046.358917, 29001.680939, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 01:01:17 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src48_src.reg
[Tue Sep  4 01:01:17 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (285, 296) - (360, 371)
[Tue Sep  4 01:01:17 2012] XMMSAS bgd. selection expression = annulus(28046.358917, 29001.680939, 1087.500000, 2175.000000, X, Y) && !ellipse(26048.462646, 27359.051483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.658000, 26880.892000, 1125.216032, 1125.216032, 0.000000, X, Y) && !ellipse(25073.498718, 26067.108917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30488.746000, 33185.708000, 3437.968099, 3437.968099, 0.000000, X, Y) && !ellipse(27777.818000, 31847.638000, 1398.624040, 1398.624040, 0.000000, X, Y) && !ellipse(25553.172241, 29875.660828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26384.459600, 27809.484000, 1250.992036, 783.135223, 128.398000, X, Y) && !ellipse(31502.480000, 33223.230000, 2522.368073, 504.972815, 166.874000, X, Y) && !ellipse(29176.673920, 31890.477600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27416.170000, 31333.778000, 1252.176036, 1252.176036, 0.000000, X, Y) && !ellipse(26355.518000, 30555.344000, 738.965621, 738.965621, 0.000000, X, Y) && !ellipse(25788.901672, 29045.650879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.778839, 28799.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.464447, 31791.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27040.248840, 30759.990021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26908.822235, 29886.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29245.317047, 30670.260651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28936.213226, 31466.259674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28370.490204, 29936.054779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29751.368286, 31278.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.469460, 31470.754000, 1549.904045, 1549.904045, 0.000000, X, Y) && !ellipse(30101.120605, 30688.134308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26524.642151, 26057.133972, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:01:17 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src48.gif
[Tue Sep  4 01:26:53 2012] Mean detx,y = (1985.29, -606.10) 
[Tue Sep  4 01:26:55 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:27:19 2012] grppha failed
[Tue Sep  4 01:27:20 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src48_src.pi.gz
[Tue Sep  4 01:27:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Tue Sep  4 02:08:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 02:08:45 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:29:58 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src48_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete