[Sun Sep 2 10:32:13 2012] Detection parameters: Position = (309.9, 344.1) = 15 3 49.78 -41 45 6.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 242.7 +/- 25.0 Background counts = 85.2 Rate = 0.09 +/- 0.009 [Sun Sep 2 10:32:15 2012] Off-axis axis estimate = 3.41' [Sun Sep 2 10:36:30 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting [Sun Sep 2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 8.13" [Sun Sep 2 10:36:30 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.890 [Sun Sep 2 10:36:30 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 8.13" [Sun Sep 2 17:27:57 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src47.ximg exists [Sun Sep 2 17:27:57 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src47_1.ximg exists [Sun Sep 2 17:27:57 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src47 appears to have run properly [Sun Sep 2 17:28:00 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists [Sun Sep 2 17:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src47.csv [Sun Sep 2 17:28:00 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists [Sun Sep 2 17:28:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src47.csv [Sun Sep 2 17:28:00 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 3 04:47:06 2012] Source 47 is offset by -7.493974 and 1.863850 pixels which is larger than 2 X fitted extent = 7.348230 x 7.348230, not incorporating fit results [Mon Sep 3 04:47:07 2012] Vigneting correction estimate = 1.000000 [Mon Sep 3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 3 04:47:07 2012] Assessing source extent using major [Mon Sep 3 04:47:07 2012] Source does appear to be extended [Mon Sep 3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Sep 3 04:48:01 2012] Using EEF radius (= 8.13 ")to estimate initial spatial extent for simple fitting [Mon Sep 3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 8.13" [Mon Sep 3 04:48:01 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.890 [Mon Sep 3 04:48:01 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 8.13" [Mon Sep 3 10:59:46 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src44.ximg exists [Mon Sep 3 10:59:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src44.csv [Mon Sep 3 10:59:46 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src44_1.ximg exists [Mon Sep 3 10:59:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src44.csv [Mon Sep 3 10:59:46 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src44_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists [Mon Sep 3 10:59:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src44.csv [Mon Sep 3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists [Mon Sep 3 10:59:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src44.csv [Mon Sep 3 10:59:48 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 01:00:02 2012] Source 47 is offset by 4.586673 and 0.615340 pixels which is larger than 2 X fitted extent = 1.212791 x 8.423443, not incorporating fit results [Tue Sep 4 01:00:02 2012] Warning, spatial fit 44 centroid is now closest to src. 38 [Tue Sep 4 01:00:03 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 01:00:03 2012] Assessing source extent using major [Tue Sep 4 01:00:03 2012] Source does appear to be extended [Tue Sep 4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 01:01:17 2012] XMMSAS src. selection expression = ellipse(26908.822235, 29886.888947, 652.500000, 652.500000, 0.000000, X, Y) [Tue Sep 4 01:01:17 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src47_src.reg [Tue Sep 4 01:01:17 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (272, 307) - (347, 382) [Tue Sep 4 01:01:17 2012] XMMSAS bgd. selection expression = annulus(26908.822235, 29886.888947, 1087.500000, 2175.000000, X, Y) && !ellipse(26048.462646, 27359.051483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.212524, 27023.824829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.658000, 26880.892000, 1125.216032, 1125.216032, 0.000000, X, Y) && !ellipse(30488.746000, 33185.708000, 3437.968099, 3437.968099, 0.000000, X, Y) && !ellipse(27531.848755, 32223.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27777.818000, 31847.638000, 1398.624040, 1398.624040, 0.000000, X, Y) && !ellipse(25553.172241, 29875.660828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25082.458600, 29002.826000, 691.468820, 691.468820, 0.000000, X, Y) && !ellipse(26384.459600, 27809.484000, 1250.992036, 783.135223, 128.398000, X, Y) && !ellipse(31502.480000, 33223.230000, 2522.368073, 504.972815, 166.874000, X, Y) && !ellipse(29176.673920, 31890.477600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27416.170000, 31333.778000, 1252.176036, 1252.176036, 0.000000, X, Y) && !ellipse(26355.518000, 30555.344000, 738.965621, 738.965621, 0.000000, X, Y) && !ellipse(25788.901672, 29045.650879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.778839, 28799.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.464447, 31791.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27040.248840, 30759.990021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.358917, 29001.680939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29245.317047, 30670.260651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28936.213226, 31466.259674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28370.490204, 29936.054779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29751.368286, 31278.161469, 870.000000, 870.000000, 0.000000, X, Y) [Tue Sep 4 01:01:17 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src47.gif [Tue Sep 4 01:26:31 2012] Mean detx,y = (1301.68, -1893.92) [Tue Sep 4 01:26:33 2012] Setting backscal keywords in source and bgd. spectrum [Tue Sep 4 01:26:47 2012] grppha failed [Tue Sep 4 01:26:47 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src47_src.pi.gz [Tue Sep 4 01:26:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src47_bgd.pi.gz [Tue Sep 4 02:08:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Sep 4 02:08:45 2012] rmf not generated due to insufficient counts [Tue Sep 4 04:29:58 2012] Updating aperture counts using extracted products [Tue Sep 4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src47_src.pi.gz [Tue Sep 4 04:30:00 2012] No arf file for this source, not re-computing flux [Tue Sep 4 04:30:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Sep 4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete