[Sun Sep  2 10:32:12 2012] Detection parameters:
  Position = (291.9, 306.1) = 15 3 56.76 -41 47 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 495.7 +/- 31.4
  Background counts = 59.5
  Rate = 0.2 +/- 0.01

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 0.73'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 6.79 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 6.79"
[Sun Sep  2 10:36:30 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.941
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 6.79"
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src4.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src4.csv
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src4.csv
[Sun Sep  2 17:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:27:58 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Sep  2 17:27:58 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Sep  2 17:27:58 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 3279.290000, observed total counts = 3276.000000
[Mon Sep  3 04:47:06 2012] Offset between fit and detection position for source 4 = 5.116996 pixels
[Mon Sep  3 04:47:06 2012] Warning, changing simple spatial fit ID from 4 to 2
[Mon Sep  3 04:47:06 2012] 3353.952000 total counts/ 2971.310000 bgd. counts: snr = 7.019702
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 5.116996 pixels
  Position = (295.7, 309.5) = 15 3 55.30 -41 47 37.3
  Extent = 14.1 (14.0-28.1)", rotation angle = 0
  Source counts = 382.6 +/- 57.9
  Background counts = 2971.3
  Rate = 0.1 +/- 0.02
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 3416.800000, observed total counts = 3227.000000
[Mon Sep  3 04:47:06 2012] Offset between fit and detection position for source 4 = 1.730803 pixels
[Mon Sep  3 04:47:06 2012] Warning, changing simple spatial fit ID from 2 to 4
[Mon Sep  3 04:47:06 2012] 3309.070000 total counts/ 2888.370000 bgd. counts: snr = 7.827915
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.730803 pixels
  Position = (297.1, 310.5) = 15 3 54.76 -41 47 32.9
  Extent = 13.6 (13.5-27.2)", rotation angle = 0
  Source counts = 420.7 +/- 57.5
  Background counts = 2888.4
  Rate = 0.1 +/- 0.02
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:07 2012] Source is confused with source 2
[Mon Sep  3 04:48:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 13.58"
[Mon Sep  3 04:48:01 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.067
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.58"
[Mon Sep  3 10:59:44 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Sep  3 10:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src3.csv
[Mon Sep  3 10:59:44 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Sep  3 10:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src3.csv
[Mon Sep  3 10:59:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:59:47 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Sep  3 10:59:47 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Sep  3 10:59:47 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Sep  4 01:00:02 2012] Spatial fit model total counts = 3278.090000, observed total counts = 3276.000000
[Tue Sep  4 01:00:02 2012] Offset between fit and detection position for source 4 = 1.709209 pixels
[Tue Sep  4 01:00:02 2012] Warning, changing simple spatial fit ID from 3 to 1
[Tue Sep  4 01:00:02 2012] 3354.046000 total counts/ 2966.790000 bgd. counts: snr = 7.109757
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.709209 pixels
  Position = (295.7, 309.5) = 15 3 55.29 -41 47 37.3
  Extent = 14.1 (14.0-28.1)", rotation angle = 0
  Source counts = 387.3 +/- 57.9
  Background counts = 2966.8
  Rate = 0.1 +/- 0.02
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:01:15 2012] XMMSAS src. selection expression = ellipse(25675.658000, 26880.892000, 843.912024, 843.912024, 0.000000, X, Y)
[Tue Sep  4 01:01:15 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src4_src.reg
[Tue Sep  4 01:01:15 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (247, 261) - (344, 358)
[Tue Sep  4 01:01:15 2012] XMMSAS bgd. selection expression = annulus(25675.658000, 26880.892000, 1406.520040, 2813.040081, X, Y) && !ellipse(26048.462646, 27359.051483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.212524, 27023.824829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25073.498718, 26067.108917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.990234, 25167.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.490662, 24484.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25553.172241, 29875.660828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25082.458600, 29002.826000, 691.468820, 691.468820, 0.000000, X, Y) && !ellipse(26384.459600, 27809.484000, 1250.992036, 783.135223, 128.398000, X, Y) && !ellipse(24217.817291, 26204.729706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23898.858002, 25614.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23579.454200, 25178.182800, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(24109.178802, 24065.434540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23444.932953, 23674.608917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24303.983612, 23547.486115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25788.901672, 29045.650879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.778839, 28799.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.980200, 24891.252000, 1083.408031, 1083.408031, 0.000000, X, Y) && !ellipse(26908.822235, 29886.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.358917, 29001.680939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.287262, 23863.885956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.141693, 25033.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.225220, 23974.074982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28370.490204, 29936.054779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.506226, 24502.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26524.642151, 26057.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26972.988983, 25521.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.389160, 24986.140289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.861359, 24489.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.354248, 24039.906433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.421356, 23629.574310, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:01:15 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src4.gif
[Tue Sep  4 01:02:19 2012] Mean detx,y = (-954.87, 477.78) 
[Tue Sep  4 01:02:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:02:39 2012] grppha failed
[Tue Sep  4 01:02:40 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Sep  4 01:02:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Sep  4 04:29:57 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:57 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src4_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Tue Sep  4 04:30:08 2012] Source 4 has no response, skipping
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete