[Sun Sep  2 10:32:12 2012] Detection parameters:
  Position = (283.9, 311.2) = 15 3 59.89 -41 47 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 570.2 +/- 30.8
  Background counts = 42.6
  Rate = 0.2 +/- 0.01

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 1.40'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Sun Sep  2 10:36:30 2012] source mask rpix=1.6, npix_max = 18, mask sum = 11, frac = 0.601
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.13"
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src3.csv
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src3.csv
[Sun Sep  2 17:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:27:58 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Sep  2 17:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Sep  2 17:27:58 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Sep  2 17:27:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sun Sep  2 17:27:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 2320.170000, observed total counts = 2084.000000
[Mon Sep  3 04:47:06 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:48:01 2012] Using EEF radius (= 7.13 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 7.13"
[Mon Sep  3 04:48:01 2012] source mask rpix=1.6, npix_max = 18, mask sum = 11, frac = 0.601
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.13"
[Mon Sep  3 10:59:44 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Sep  3 10:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src2.csv
[Mon Sep  3 10:59:44 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Sep  3 10:59:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src2.csv
[Mon Sep  3 10:59:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:59:47 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Sep  3 10:59:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Sep  3 10:59:47 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Sep  3 10:59:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Sep  3 10:59:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:02 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.462346 pixels away
[Tue Sep  4 01:00:02 2012] Source 3 is offset by -8.663120 and 2.308147 pixels which is larger than
2 X fitted extent = 1.503467 x 1.503467, not incorporating fit results
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:01:14 2012] XMMSAS src. selection expression = ellipse(24647.212524, 27023.824829, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 01:01:14 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src3_src.reg
[Tue Sep  4 01:01:14 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (246, 274) - (321, 349)
[Tue Sep  4 01:01:15 2012] XMMSAS bgd. selection expression = annulus(24647.212524, 27023.824829, 1087.500000, 2175.000000, X, Y) && !ellipse(26048.462646, 27359.051483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.658000, 26880.892000, 1125.216032, 1125.216032, 0.000000, X, Y) && !ellipse(25073.498718, 26067.108917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.990234, 25167.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.490662, 24484.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25553.172241, 29875.660828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25082.458600, 29002.826000, 691.468820, 691.468820, 0.000000, X, Y) && !ellipse(26384.459600, 27809.484000, 1250.992036, 783.135223, 128.398000, X, Y) && !ellipse(24217.817291, 26204.729706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23898.858002, 25614.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23579.454200, 25178.182800, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(24109.178802, 24065.434540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25788.901672, 29045.650879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.778839, 28799.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.980200, 24891.252000, 1083.408031, 1083.408031, 0.000000, X, Y) && !ellipse(26908.822235, 29886.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.141693, 25033.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.506226, 24502.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26524.642151, 26057.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26972.988983, 25521.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.389160, 24986.140289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.861359, 24489.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.354248, 24039.906433, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:01:15 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src3.gif
[Tue Sep  4 01:01:48 2012] Mean detx,y = (-1729.30, 9.91) 
[Tue Sep  4 01:01:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:02:13 2012] grppha failed
[Tue Sep  4 01:02:13 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue Sep  4 01:02:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Sep  4 02:08:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 02:08:40 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:29:57 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:57 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src3_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete