[Sun Sep  2 10:32:12 2012] Detection parameters:
  Position = (279.9, 271.2) = 15 4 1.43 -41 50 24.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 373.1 +/- 26.7
  Background counts = 52.4
  Rate = 0.2 +/- 0.01

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 2.39'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Sun Sep  2 10:36:30 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.739
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.62"
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src28.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src28.csv
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src28.csv
[Sun Sep  2 17:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun Sep  2 17:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Sep  2 17:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun Sep  2 17:27:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 3078.850000, observed total counts = 2453.000000
[Mon Sep  3 04:47:06 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 3104.940000, observed total counts = 2442.000000
[Mon Sep  3 04:47:06 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:07 2012] Source 28 is offset by -2.011312 and 6.292300 pixels which is larger than
2 X fitted extent = 5.459954 x 5.459954, not incorporating fit results
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:07 2012] Source is confused with source 26
[Mon Sep  3 04:48:01 2012] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 7.62"
[Mon Sep  3 04:48:01 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.739
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.62"
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src27.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src27.csv
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src27.csv
[Mon Sep  3 10:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Sep  3 10:59:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Sep  3 10:59:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Sep  3 10:59:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:02 2012] Warning, spatial fit 27 centroid is now closest to src. 8
[Tue Sep  4 01:00:02 2012] Source 28 is offset by -3.264809 and 2.934369 pixels which is larger than
2 X fitted extent = 0.845113 x 6.760920, not incorporating fit results
[Tue Sep  4 01:00:03 2012] Source 28 is offset by -0.598740 and 6.299036 pixels which is larger than
2 X fitted extent = 5.520138 x 5.520138, not incorporating fit results
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:01:16 2012] XMMSAS src. selection expression = ellipse(24303.983612, 23547.486115, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 01:01:16 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src28_src.reg
[Tue Sep  4 01:01:16 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (242, 234) - (317, 309)
[Tue Sep  4 01:01:16 2012] XMMSAS bgd. selection expression = annulus(24303.983612, 23547.486115, 1087.500000, 2175.000000, X, Y) && !ellipse(25073.498718, 26067.108917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.990234, 25167.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.490662, 24484.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23613.354736, 23077.991974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23272.212400, 22355.234000, 1349.360039, 774.096822, 290.480000, X, Y) && !ellipse(23117.797000, 21926.190000, 1096.080032, 1096.080032, 0.000000, X, Y) && !ellipse(22821.762000, 21453.456000, 1349.360039, 1349.360039, 0.000000, X, Y) && !ellipse(22544.274200, 20154.249800, 1474.528042, 788.420023, 294.212000, X, Y) && !ellipse(24217.817291, 26204.729706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23898.858002, 25614.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23579.454200, 25178.182800, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(24109.178802, 24065.434540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23444.932953, 23674.608917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.980200, 24891.252000, 1083.408031, 1083.408031, 0.000000, X, Y) && !ellipse(23894.753326, 21182.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.287262, 23863.885956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.141693, 25033.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.225220, 23974.074982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.831909, 22391.727966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.506226, 24502.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24923.439117, 22570.815002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.294586, 21903.122925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.935608, 21192.960999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26524.642151, 26057.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26972.988983, 25521.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.389160, 24986.140289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.861359, 24489.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.354248, 24039.906433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.421356, 23629.574310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.763794, 22758.039703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.633698, 21349.683395, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:01:16 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src28.gif
[Tue Sep  4 01:19:46 2012] Mean detx,y = (-3359.37, 3105.69) 
[Tue Sep  4 01:19:48 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:19:56 2012] grppha failed
[Tue Sep  4 01:19:57 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src28_src.pi.gz
[Tue Sep  4 01:19:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Sep  4 02:08:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 02:08:44 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:29:58 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src28_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete