[Sun Sep  2 10:32:12 2012] Detection parameters:
  Position = (272.7, 289.2) = 15 4 4.23 -41 49 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 404.4 +/- 26.2
  Background counts = 33.8
  Rate = 0.2 +/- 0.01

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 1.98'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Sun Sep  2 10:36:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.719
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.42"
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src25.csv
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src25.csv
[Sun Sep  2 17:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Sep  2 17:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Sep  2 17:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Sun Sep  2 17:27:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:06 2012] Source 25 is offset by 1.322017 and -0.445441 pixels which is larger than
2 X fitted extent = 0.990529 x 0.990529, not incorporating fit results
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 2221.420000, observed total counts = 2134.000000
[Mon Sep  3 04:47:06 2012] Offset between fit and detection position for source 25 = 2.031020 pixels
[Mon Sep  3 04:47:06 2012] Warning, changing simple spatial fit ID from 25 to 24
[Mon Sep  3 04:47:06 2012] 2243.342000 total counts/ 1948.060000 bgd. counts: snr = 6.690149
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.031020 pixels
  Position = (272.8, 291.3) = 15 4 4.21 -41 48 56.7
  Extent = 14.6 (14.5-29.1)" x 6.5 (4.9-8.0)", rotation angle = 288 (277-300) degrees
  Source counts = 295.3 +/- 47.4
  Background counts = 1948.1
  Rate = 0.09 +/- 0.01
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.81
[Mon Sep  3 04:47:07 2012] Source is asymmetric
[Mon Sep  3 04:47:07 2012] Source is confused with source 6
[Mon Sep  3 04:48:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 10.51"
[Mon Sep  3 04:48:01 2012] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.911
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 10.51"
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src24.ximg exists
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src24_1.ximg exists
[Mon Sep  3 10:59:45 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src24 appears to have run properly
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Mon Sep  3 10:59:48 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Tue Sep  4 01:00:02 2012] Spatial fit model total counts = 2041.140000, observed total counts = 1876.000000
[Tue Sep  4 01:00:02 2012] Offset between fit and detection position for source 25 = 1.767589 pixels
[Tue Sep  4 01:00:02 2012] 2128.308000 total counts/ 1877.590000 bgd. counts: snr = 5.786089
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.767589 pixels
  Position = (271.6, 290.0) = 15 4 4.67 -41 49 2.4
  Extent = 9.8 (7.2-14.0)", rotation angle = 0
  Source counts = 250.7 +/- 46.1
  Background counts = 1877.6
  Rate = 0.07 +/- 0.01
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:01:16 2012] XMMSAS src. selection expression = ellipse(23579.454200, 25178.182800, 585.498617, 585.498617, 0.000000, X, Y)
[Tue Sep  4 01:01:16 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src25_src.reg
[Tue Sep  4 01:01:16 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (238, 256) - (305, 324)
[Tue Sep  4 01:01:16 2012] XMMSAS bgd. selection expression = annulus(23579.454200, 25178.182800, 975.831028, 1951.662056, X, Y) && !ellipse(26048.462646, 27359.051483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.212524, 27023.824829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.658000, 26880.892000, 1125.216032, 1125.216032, 0.000000, X, Y) && !ellipse(25073.498718, 26067.108917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.990234, 25167.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.490662, 24484.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23613.354736, 23077.991974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23272.212400, 22355.234000, 1349.360039, 774.096822, 290.480000, X, Y) && !ellipse(26384.459600, 27809.484000, 1250.992036, 783.135223, 128.398000, X, Y) && !ellipse(24217.817291, 26204.729706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23898.858002, 25614.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24109.178802, 24065.434540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23444.932953, 23674.608917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24303.983612, 23547.486115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.980200, 24891.252000, 1083.408031, 1083.408031, 0.000000, X, Y) && !ellipse(25074.287262, 23863.885956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.141693, 25033.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.225220, 23974.074982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.831909, 22391.727966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.506226, 24502.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24923.439117, 22570.815002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.421356, 23629.574310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.763794, 22758.039703, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:01:16 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src25.gif
[Tue Sep  4 01:18:40 2012] Mean detx,y = (-3366.53, 1398.36) 
[Tue Sep  4 01:18:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:18:57 2012] grppha failed
[Tue Sep  4 01:18:57 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src25_src.pi.gz
[Tue Sep  4 01:18:57 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Sep  4 04:29:58 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src25_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Flag b found in src. 25 procflags, skipping spectral fitting
[Tue Sep  4 04:30:08 2012] Flag c found in src. 25 procflags, skipping spectral fitting
[Tue Sep  4 04:30:08 2012] Source 25 has no response, skipping
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete