[Sun Sep  2 10:32:12 2012] Detection parameters:
  Position = (306.9, 324.0) = 15 3 50.93 -41 46 33.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 401.2 +/- 30.7
  Background counts = 106.5
  Rate = 0.1 +/- 0.01

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 1.95'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 7.40"
[Sun Sep  2 10:36:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 7.40"
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src22.ximg exists
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sun Sep  2 17:27:56 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src22 appears to have run properly
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sun Sep  2 17:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sun Sep  2 17:27:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sun Sep  2 17:27:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 3142.800000, observed total counts = 2865.000000
[Mon Sep  3 04:47:06 2012] Offset between fit and detection position for source 22 = 4.868151 pixels
[Mon Sep  3 04:47:06 2012] 3064.645000 total counts/ 2743.060000 bgd. counts: snr = 6.140138
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 4.868151 pixels
  Position = (303.8, 320.2) = 15 3 52.12 -41 46 50.9
  Extent = 15.6" x 9.8", rotation angle = 128
  Source counts = 321.6 +/- 55.4
  Background counts = 2743.1
  Rate = 0.09 +/- 0.02
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.60
[Mon Sep  3 04:47:07 2012] Source is asymmetric
[Mon Sep  3 04:47:07 2012] Source is confused with source 2
[Mon Sep  3 04:48:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 12.71"
[Mon Sep  3 04:48:01 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.046
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 12.71"
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src21.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src21.csv
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src21.csv
[Mon Sep  3 10:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Sep  3 10:59:48 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Tue Sep  4 01:00:02 2012] Warning, spatial fit 21 centroid is now closest to src. 3
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.60
[Tue Sep  4 01:00:03 2012] Source is asymmetric
[Tue Sep  4 01:01:16 2012] XMMSAS src. selection expression = ellipse(26384.459600, 27809.484000, 938.244027, 587.351417, 128.398000, X, Y)
[Tue Sep  4 01:01:16 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src22_src.reg
[Tue Sep  4 01:01:16 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (250, 266) - (358, 374)
[Tue Sep  4 01:01:16 2012] XMMSAS bgd. selection expression = annulus(26384.459600, 27809.484000, 1563.740045, 3127.480090, X, Y) && !ellipse(26048.462646, 27359.051483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.212524, 27023.824829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.658000, 26880.892000, 1125.216032, 1125.216032, 0.000000, X, Y) && !ellipse(25073.498718, 26067.108917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.990234, 25167.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.490662, 24484.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30488.746000, 33185.708000, 3437.968099, 3437.968099, 0.000000, X, Y) && !ellipse(27777.818000, 31847.638000, 1398.624040, 1398.624040, 0.000000, X, Y) && !ellipse(25553.172241, 29875.660828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25082.458600, 29002.826000, 691.468820, 691.468820, 0.000000, X, Y) && !ellipse(24217.817291, 26204.729706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23898.858002, 25614.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23579.454200, 25178.182800, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(24109.178802, 24065.434540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31502.480000, 33223.230000, 2522.368073, 504.972815, 166.874000, X, Y) && !ellipse(27416.170000, 31333.778000, 1252.176036, 1252.176036, 0.000000, X, Y) && !ellipse(26355.518000, 30555.344000, 738.965621, 738.965621, 0.000000, X, Y) && !ellipse(25788.901672, 29045.650879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.778839, 28799.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.980200, 24891.252000, 1083.408031, 1083.408031, 0.000000, X, Y) && !ellipse(26701.464447, 31791.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27040.248840, 30759.990021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26908.822235, 29886.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.358917, 29001.680939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.287262, 23863.885956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29245.317047, 30670.260651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.141693, 25033.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.225220, 23974.074982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28936.213226, 31466.259674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28370.490204, 29936.054779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.506226, 24502.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29751.368286, 31278.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.469460, 31470.754000, 1549.904045, 1549.904045, 0.000000, X, Y) && !ellipse(30101.120605, 30688.134308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26524.642151, 26057.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26972.988983, 25521.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.389160, 24986.140289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.861359, 24489.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.354248, 24039.906433, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:01:16 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src22.gif
[Tue Sep  4 01:17:02 2012] Mean detx,y = (28.53, -107.72) 
[Tue Sep  4 01:17:04 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:17:42 2012] grppha failed
[Tue Sep  4 01:17:43 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src22_src.pi.gz
[Tue Sep  4 01:17:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Tue Sep  4 04:29:58 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src22_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Flag c found in src. 22 procflags, skipping spectral fitting
[Tue Sep  4 04:30:08 2012] Source 22 has no response, skipping
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete