[Sun Sep  2 10:32:12 2012] Detection parameters:
  Position = (266.6, 138.0) = 15 4 6.66 -42 0 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.8 +/- 17.1
  Background counts = 25.9
  Rate = 0.04 +/- 0.005

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 11.86'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 12.36 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 12.36"
[Sun Sep  2 10:36:30 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.941
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 12.36"
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src19.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src19.csv
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src19.csv
[Sun Sep  2 17:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Sep  2 17:27:59 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 668.719000, observed total counts = 663.000000
[Mon Sep  3 04:47:06 2012] Offset between fit and detection position for source 19 = 1.926001 pixels
[Mon Sep  3 04:47:06 2012] 649.034000 total counts/ 518.291000 bgd. counts: snr = 5.742905
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.926001 pixels
  Position = (268.3, 137.2) = 15 4 5.98 -42 0 7.0
  Extent = 12.9 (8.8-21.8)", rotation angle = 0
  Source counts = 130.7 +/- 25.5
  Background counts = 518.3
  Rate = 0.04 +/- 0.007
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:07 2012] Source is confused with source 82
[Mon Sep  3 04:48:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 12.93"
[Mon Sep  3 04:48:01 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.016
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 12.93"
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src18.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src18.csv
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src18_1.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src18.csv
[Mon Sep  3 10:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Sep  3 10:59:48 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Tue Sep  4 01:00:02 2012] Warning, spatial fit 18 centroid is now closest to src. 83
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:01:16 2012] XMMSAS src. selection expression = ellipse(23294.608600, 11886.117200, 775.950022, 775.950022, 0.000000, X, Y)
[Tue Sep  4 01:01:16 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src19_src.reg
[Tue Sep  4 01:01:16 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (224, 93) - (313, 182)
[Tue Sep  4 01:01:16 2012] XMMSAS bgd. selection expression = annulus(23294.608600, 11886.117200, 1293.250037, 2586.500074, X, Y) && !ellipse(22186.456000, 13448.730000, 1618.720047, 1618.720047, 0.000000, X, Y) && !ellipse(22296.805359, 11871.786362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22251.420288, 14577.723190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22614.973450, 13108.821594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22482.034000, 12720.360000, 1906.080055, 1906.080055, 0.000000, X, Y) && !ellipse(21835.596237, 15090.858047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21792.462000, 13730.396000, 1903.832055, 1903.832055, 0.000000, X, Y)
[Tue Sep  4 01:01:16 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src19.gif
[Tue Sep  4 01:15:33 2012] Mean detx,y = (-8412.86, 13678.99) 
[Tue Sep  4 01:15:35 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:15:55 2012] grppha failed
[Tue Sep  4 01:15:56 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src19_src.pi.gz
[Tue Sep  4 01:15:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Sep  4 04:29:58 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src19_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Flag c found in src. 19 procflags, skipping spectral fitting
[Tue Sep  4 04:30:08 2012] Source 19 has no response, skipping
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete