[Sun Sep  2 10:32:12 2012] Detection parameters:
  Position = (341.2, 381.0) = 15 3 37.61 -41 42 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 783.7 +/- 36.0
  Background counts = 37.6
  Rate = 0.3 +/- 0.02

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 6.74'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Sun Sep  2 10:36:30 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.188
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 9.80"
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src15.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src15.csv
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src15.csv
[Sun Sep  2 17:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Sep  2 17:27:59 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 3112.170000, observed total counts = 3105.000000
[Mon Sep  3 04:47:06 2012] Offset between fit and detection position for source 15 = 4.872607 pixels
[Mon Sep  3 04:47:06 2012] 2880.440000 total counts/ 1011.360000 bgd. counts: snr = 58.772614
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 4.872607 pixels
  Position = (345.5, 383.3) = 15 3 35.95 -41 42 16.4
  Extent = 19.6 (19.6-39.2)", rotation angle = 0
  Source counts = 1869.1 +/- 53.7
  Background counts = 1011.4
  Rate = 0.5 +/- 0.02
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:48:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 19.60"
[Mon Sep  3 04:48:01 2012] source mask rpix=4.5, npix_max = 100, mask sum = 100, frac = 0.998
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 19.60"
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src14.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src14.csv
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src14.csv
[Mon Sep  3 10:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon Sep  3 10:59:48 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Tue Sep  4 01:00:02 2012] Warning, spatial fit 14 centroid is now closest to src. 36
[Tue Sep  4 01:00:02 2012] Spatial fit model total counts = 5163.270000, observed total counts = 5145.000000
[Tue Sep  4 01:00:02 2012] Offset between fit and detection position for source 15 = 5.672567 pixels
[Tue Sep  4 01:00:02 2012] Warning, changing simple spatial fit ID from 14 to 31
[Tue Sep  4 01:00:02 2012] 5019.348000 total counts/ 514.358000 bgd. counts: snr = 198.637427
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 5.672567 pixels
  Position = (351.0, 382.0) = 15 3 33.80 -41 42 22.0
  Extent = 43.0 (42.9-85.9)", rotation angle = 0
  Source counts = 4505.0 +/- 70.8
  Background counts = 514.4
  Rate = 1 +/- 0.02
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:00:03 2012] Source is confused with source 16
[Tue Sep  4 01:00:03 2012] Source is confused with source 32
[Tue Sep  4 01:00:03 2012] Source is confused with source 34
[Tue Sep  4 01:00:03 2012] Source is confused with source 36
[Tue Sep  4 01:00:03 2012] Source is confused with source 55
[Tue Sep  4 01:00:03 2012] Source is confused with source 56
[Tue Sep  4 01:00:03 2012] Source is confused with source 67
[Tue Sep  4 01:00:03 2012] Source is confused with source 68
[Tue Sep  4 01:00:03 2012] Source is confused with source 87
[Tue Sep  4 01:00:03 2012] Source is confused with source 96
[Tue Sep  4 01:00:03 2012] Source is confused with source 99
[Tue Sep  4 01:00:03 2012] Source is confused with source 103
[Tue Sep  4 01:00:03 2012] Source is confused with source 105
[Tue Sep  4 01:00:03 2012] Source is confused with source 108
[Tue Sep  4 01:00:03 2012] Source is confused with source 110
[Tue Sep  4 01:00:03 2012] Source is confused with source 115
[Tue Sep  4 01:00:03 2012] Source is confused with source 117
[Tue Sep  4 01:00:03 2012] Source is confused with source 119
[Tue Sep  4 01:01:15 2012] Counts = 4504.990000, rescaling region sizes by 2.000000
[Tue Sep  4 01:01:15 2012] XMMSAS src. selection expression = ellipse(30488.746000, 33185.708000, 5156.952148, 5156.952148, 0.000000, X, Y)
[Tue Sep  4 01:01:15 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src15_src.reg
[Tue Sep  4 01:01:15 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (55, 86) - (595, 595)
[Tue Sep  4 01:01:15 2012] XMMSAS bgd. selection expression = annulus(30488.746000, 33185.708000, 17189.840495, 34379.680989, X, Y) && !ellipse(26048.462646, 27359.051483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.212524, 27023.824829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25675.658000, 26880.892000, 1125.216032, 1125.216032, 0.000000, X, Y) && !ellipse(25073.498718, 26067.108917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.990234, 25167.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.490662, 24484.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23613.354736, 23077.991974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23272.212400, 22355.234000, 1349.360039, 774.096822, 290.480000, X, Y) && !ellipse(23117.797000, 21926.190000, 1096.080032, 1096.080032, 0.000000, X, Y) && !ellipse(22821.762000, 21453.456000, 1349.360039, 1349.360039, 0.000000, X, Y) && !ellipse(22544.274200, 20154.249800, 1474.528042, 788.420023, 294.212000, X, Y) && !ellipse(22594.758200, 19620.746000, 1519.776044, 1519.776044, 0.000000, X, Y) && !ellipse(22320.012970, 18651.541733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32034.978000, 33546.486000, 850.904024, 850.904024, 0.000000, X, Y) && !ellipse(27531.848755, 32223.803253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27777.818000, 31847.638000, 1398.624040, 1398.624040, 0.000000, X, Y) && !ellipse(23294.608600, 11886.117200, 1034.600030, 1034.600030, 0.000000, X, Y) && !ellipse(25553.172241, 29875.660828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25082.458600, 29002.826000, 691.468820, 691.468820, 0.000000, X, Y) && !ellipse(26384.459600, 27809.484000, 1250.992036, 783.135223, 128.398000, X, Y) && !ellipse(24217.817291, 26204.729706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23898.858002, 25614.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23579.454200, 25178.182800, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(24109.178802, 24065.434540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23444.932953, 23674.608917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24303.983612, 23547.486115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22415.673676, 17373.121231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22334.307648, 15781.161682, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31502.480000, 33223.230000, 2522.368073, 504.972815, 166.874000, X, Y) && !ellipse(33923.722931, 33708.365540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32601.706848, 33698.069336, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29176.673920, 31890.477600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27416.170000, 31333.778000, 1252.176036, 1252.176036, 0.000000, X, Y) && !ellipse(26355.518000, 30555.344000, 738.965621, 738.965621, 0.000000, X, Y) && !ellipse(25788.901672, 29045.650879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27415.778839, 28799.819061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.980200, 24891.252000, 1083.408031, 1083.408031, 0.000000, X, Y) && !ellipse(23894.753326, 21182.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34768.816101, 34224.489960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.464447, 31791.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27040.248840, 30759.990021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26908.822235, 29886.888947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28046.358917, 29001.680939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.287262, 23863.885956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30431.700958, 21118.143600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22186.456000, 13448.730000, 1618.720047, 1618.720047, 0.000000, X, Y) && !ellipse(36511.621400, 34618.486000, 1371.160039, 1371.160039, 0.000000, X, Y) && !ellipse(33705.962738, 34299.096283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31276.244000, 32843.148000, 1367.848039, 1367.848039, 0.000000, X, Y) && !ellipse(31363.608276, 32145.928589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29245.317047, 30670.260651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.141693, 25033.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.225220, 23974.074982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.831909, 22391.727966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21907.562134, 17247.698975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31508.838379, 14401.292511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35154.554000, 34415.227600, 1838.016053, 1838.016053, 0.000000, X, Y) && !ellipse(35991.280000, 34713.276000, 1878.600054, 1878.600054, 0.000000, X, Y) && !ellipse(34337.050000, 33818.928000, 2154.040062, 2154.040062, 0.000000, X, Y) && !ellipse(32306.664062, 32305.153351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28936.213226, 31466.259674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28370.490204, 29936.054779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22296.805359, 11871.786362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.506226, 24502.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24923.439117, 22570.815002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.294586, 21903.122925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.935608, 21192.960999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23437.589142, 18392.344498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23007.246063, 16389.889542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32781.701904, 15352.020004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22251.420288, 14577.723190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30995.485809, 14209.307343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22614.973450, 13108.821594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22482.034000, 12720.360000, 1906.080055, 1906.080055, 0.000000, X, Y) && !ellipse(32127.871735, 34306.028564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33964.445770, 33026.615082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36597.048035, 33040.275208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35175.992000, 32858.638000, 1839.416053, 1839.416053, 0.000000, X, Y) && !ellipse(32341.606903, 33027.501862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35730.685425, 33098.351318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33263.738403, 32736.675262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31850.998000, 32388.142000, 1261.184036, 1261.184036, 0.000000, X, Y) && !ellipse(34598.732269, 32501.158234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33488.194580, 32044.896759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30905.801575, 32156.609772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32362.584600, 31921.386000, 1631.064047, 1631.064047, 0.000000, X, Y) && !ellipse(38057.638062, 31545.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36162.480804, 31619.215912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32174.286957, 31473.191956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35052.529877, 31455.551941, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31631.468872, 31454.213806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29751.368286, 31278.161469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30928.469460, 31470.754000, 1549.904045, 1549.904045, 0.000000, X, Y) && !ellipse(30101.120605, 30688.134308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37031.341797, 30293.124359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26524.642151, 26057.133972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26972.988983, 25521.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27135.389160, 24986.140289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33703.196198, 25015.565979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.861359, 24489.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.354248, 24039.906433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.421356, 23629.574310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.763794, 22758.039703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.633698, 21349.683395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31129.309906, 20993.163406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.236145, 20021.839523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25007.768158, 19765.829651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31369.090912, 17867.656281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31116.414429, 17439.077469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31764.408844, 17175.682632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22780.081757, 16851.798264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22092.993362, 16745.289108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31366.759796, 16717.813538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32775.868805, 15856.706558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21805.074020, 15613.896164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21835.596237, 15090.858047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21792.462000, 13730.396000, 1903.832055, 1903.832055, 0.000000, X, Y) && !ellipse(19945.601685, 39697.793030, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:01:15 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src15.gif
[Tue Sep  4 01:07:04 2012] Mean detx,y = (4993.79, -2526.16) 
[Tue Sep  4 01:07:06 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:14:09 2012] grppha failed
[Tue Sep  4 01:14:10 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Sep  4 01:14:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Sep  4 04:29:58 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Flag c found in src. 15 procflags, skipping spectral fitting
[Tue Sep  4 04:30:08 2012] Source 15 has no response, skipping
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete