[Sun Sep  2 10:32:12 2012] Detection parameters:
  Position = (261.9, 240.1) = 15 4 8.43 -41 52 38.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 485.3 +/- 29.9
  Background counts = 48.4
  Rate = 0.2 +/- 0.02

[Sun Sep  2 10:32:15 2012] Off-axis axis estimate = 4.99'
[Sun Sep  2 10:36:30 2012] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 8.92"
[Sun Sep  2 10:36:30 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.960
[Sun Sep  2 10:36:30 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 8.92"
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src11.csv
[Sun Sep  2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Sep  2 17:27:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src11.csv
[Sun Sep  2 17:27:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Sep  2 17:27:59 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Sep  2 17:27:59 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Sep  3 04:47:06 2012] Spatial fit model total counts = 2538.520000, observed total counts = 2525.000000
[Mon Sep  3 04:47:06 2012] Offset between fit and detection position for source 11 = 4.803390 pixels
[Mon Sep  3 04:47:06 2012] 2565.670000 total counts/ 1939.540000 bgd. counts: snr = 14.217235
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.803390 pixels
  Position = (263.3, 244.7) = 15 4 7.92 -41 52 19.4
  Extent = 16.7 (14.6-17.8)", rotation angle = 0
  Source counts = 626.1 +/- 50.7
  Background counts = 1939.5
  Rate = 0.2 +/- 0.01
[Mon Sep  3 04:47:07 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:07 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:07 2012] Source does appear to be extended
[Mon Sep  3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:07 2012] Source is confused with source 10
[Mon Sep  3 04:48:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 04:48:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 16.67"
[Mon Sep  3 04:48:01 2012] source mask rpix=3.8, npix_max = 75, mask sum = 81, frac = 1.079
[Mon Sep  3 04:48:01 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 16.67"
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src10.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src10.csv
[Mon Sep  3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Sep  3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src10.csv
[Mon Sep  3 10:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Sep  3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Sep  3 10:59:48 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Sep  4 01:00:02 2012] Spatial fit model total counts = 2804.980000, observed total counts = 2805.000000
[Tue Sep  4 01:00:02 2012] Offset between fit and detection position for source 11 = 2.512534 pixels
[Tue Sep  4 01:00:02 2012] Warning, changing simple spatial fit ID from 10 to 9
[Tue Sep  4 01:00:02 2012] 2636.901000 total counts/ 1848.870000 bgd. counts: snr = 18.326947
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.512534 pixels
  Position = (262.9, 247.1) = 15 4 8.07 -41 52 8.7
  Extent = 16.9 (16.7-33.7)", rotation angle = 0
  Source counts = 788.0 +/- 51.4
  Background counts = 1848.9
  Rate = 0.2 +/- 0.02
[Tue Sep  4 01:00:03 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:03 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:03 2012] Source does appear to be extended
[Tue Sep  4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:01:15 2012] XMMSAS src. selection expression = ellipse(22821.762000, 21453.456000, 1012.020029, 1012.020029, 0.000000, X, Y)
[Tue Sep  4 01:01:15 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src11_src.reg
[Tue Sep  4 01:01:15 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (205, 189) - (321, 305)
[Tue Sep  4 01:01:15 2012] XMMSAS bgd. selection expression = annulus(22821.762000, 21453.456000, 1686.700049, 3373.400097, X, Y) && !ellipse(24484.990234, 25167.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.490662, 24484.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23613.354736, 23077.991974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23272.212400, 22355.234000, 1349.360039, 774.096822, 290.480000, X, Y) && !ellipse(23117.797000, 21926.190000, 1096.080032, 1096.080032, 0.000000, X, Y) && !ellipse(22544.274200, 20154.249800, 1474.528042, 788.420023, 294.212000, X, Y) && !ellipse(22594.758200, 19620.746000, 1519.776044, 1519.776044, 0.000000, X, Y) && !ellipse(22320.012970, 18651.541733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23898.858002, 25614.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23579.454200, 25178.182800, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(24109.178802, 24065.434540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23444.932953, 23674.608917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24303.983612, 23547.486115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22415.673676, 17373.121231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.980200, 24891.252000, 1083.408031, 1083.408031, 0.000000, X, Y) && !ellipse(23894.753326, 21182.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.287262, 23863.885956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.141693, 25033.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.225220, 23974.074982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.831909, 22391.727966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21907.562134, 17247.698975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.506226, 24502.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24923.439117, 22570.815002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.294586, 21903.122925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.935608, 21192.960999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23437.589142, 18392.344498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26972.988983, 25521.298615, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.861359, 24489.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26795.354248, 24039.906433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.421356, 23629.574310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.763794, 22758.039703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.633698, 21349.683395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.236145, 20021.839523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25007.768158, 19765.829651, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 01:01:15 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src11.gif
[Tue Sep  4 01:05:06 2012] Mean detx,y = (-5340.28, 4710.06) 
[Tue Sep  4 01:05:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 01:05:31 2012] grppha failed
[Tue Sep  4 01:05:31 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src11_src.pi.gz
[Tue Sep  4 01:05:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Sep  4 04:29:58 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src11_src.pi.gz
[Tue Sep  4 04:30:00 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:08 2012] Flag c found in src. 11 procflags, skipping spectral fitting
[Tue Sep  4 04:30:08 2012] Source 11 has no response, skipping
[Tue Sep  4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete