[Sun Sep 2 10:32:12 2012] Detection parameters: Position = (266.9, 253.0) = 15 4 6.49 -41 51 43.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 581.2 +/- 32.4 Background counts = 48.2 Rate = 0.3 +/- 0.01 [Sun Sep 2 10:32:15 2012] Off-axis axis estimate = 4.01' [Sun Sep 2 10:36:30 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting [Sun Sep 2 10:36:30 2012] Initial guess for spatial extent in simple fitting = 8.43" [Sun Sep 2 10:36:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.841 [Sun Sep 2 10:36:30 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.43" [Sun Sep 2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src10.ximg exists [Sun Sep 2 17:27:56 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src10_1.ximg exists [Sun Sep 2 17:27:56 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_src10 appears to have run properly [Sun Sep 2 17:27:58 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Sun Sep 2 17:27:58 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Sun Sep 2 17:27:59 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly [Mon Sep 3 04:47:06 2012] Warning, spatial fit 10 centroid is now closest to src. 9 [Mon Sep 3 04:47:06 2012] Source 10 is offset by -3.191522 and 2.206568 pixels which is larger than 2 X fitted extent = 0.957039 x 0.957039, not incorporating fit results [Mon Sep 3 04:47:06 2012] Source 10 is offset by -3.223959 and 2.154908 pixels which is larger than 2 X fitted extent = 0.985384 x 0.985384, not incorporating fit results [Mon Sep 3 04:47:07 2012] Vigneting correction estimate = 1.000000 [Mon Sep 3 04:47:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 3 04:47:07 2012] Assessing source extent using major [Mon Sep 3 04:47:07 2012] Source does appear to be extended [Mon Sep 3 04:47:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Sep 3 04:47:07 2012] Source is confused with source 9 [Mon Sep 3 04:47:07 2012] Source is confused with source 11 [Mon Sep 3 04:48:01 2012] Using EEF radius (= 8.43 ")to estimate initial spatial extent for simple fitting [Mon Sep 3 04:48:01 2012] Initial guess for spatial extent in simple fitting = 8.43" [Mon Sep 3 04:48:01 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.841 [Mon Sep 3 04:48:01 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.43" [Mon Sep 3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src9.ximg exists [Mon Sep 3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src9.csv [Mon Sep 3 10:59:45 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src9_1.ximg exists [Mon Sep 3 10:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src9.csv [Mon Sep 3 10:59:45 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 3 10:59:47 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Mon Sep 3 10:59:48 2012] fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Mon Sep 3 10:59:48 2012] Fit fullrun_pn_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly [Tue Sep 4 01:00:02 2012] Source 10 is offset by 1.060110 and -6.705368 pixels which is larger than 2 X fitted extent = 1.546837 x 1.546837, not incorporating fit results [Tue Sep 4 01:00:02 2012] Spatial fit model total counts = 3663.310000, observed total counts = 3577.000000 [Tue Sep 4 01:00:02 2012] Offset between fit and detection position for source 10 = 0.759200 pixels [Tue Sep 4 01:00:02 2012] Warning, changing simple spatial fit ID from 9 to 8 [Tue Sep 4 01:00:02 2012] 3783.469000 total counts/ 3272.620000 bgd. counts: snr = 8.929862 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.759200 pixels Position = (266.3, 252.6) = 15 4 6.74 -41 51 45.0 Extent = 13.7 (11.6-18.7)", rotation angle = 0 Source counts = 510.8 +/- 61.5 Background counts = 3272.6 Rate = 0.2 +/- 0.02 [Tue Sep 4 01:00:03 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 01:00:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 01:00:03 2012] Assessing source extent using major axis lower bound [Tue Sep 4 01:00:03 2012] Source does appear to be extended [Tue Sep 4 01:00:03 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 01:01:15 2012] XMMSAS src. selection expression = ellipse(23117.797000, 21926.190000, 822.060024, 822.060024, 0.000000, X, Y) [Tue Sep 4 01:01:15 2012] Writing source region out to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src10_src.reg [Tue Sep 4 01:01:15 2012] Extracting stamp from image fullrun_pn_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (219, 205) - (314, 300) [Tue Sep 4 01:01:15 2012] XMMSAS bgd. selection expression = annulus(23117.797000, 21926.190000, 1370.100039, 2740.200079, X, Y) && !ellipse(24484.990234, 25167.943420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24245.490662, 24484.015839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23613.354736, 23077.991974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23272.212400, 22355.234000, 1349.360039, 774.096822, 290.480000, X, Y) && !ellipse(22821.762000, 21453.456000, 1349.360039, 1349.360039, 0.000000, X, Y) && !ellipse(22544.274200, 20154.249800, 1474.528042, 788.420023, 294.212000, X, Y) && !ellipse(22594.758200, 19620.746000, 1519.776044, 1519.776044, 0.000000, X, Y) && !ellipse(22320.012970, 18651.541733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23579.454200, 25178.182800, 780.664822, 780.664822, 0.000000, X, Y) && !ellipse(24109.178802, 24065.434540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23444.932953, 23674.608917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24303.983612, 23547.486115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25997.980200, 24891.252000, 1083.408031, 1083.408031, 0.000000, X, Y) && !ellipse(23894.753326, 21182.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.287262, 23863.885956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25386.141693, 25033.832581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25957.225220, 23974.074982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25515.831909, 22391.727966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25718.506226, 24502.216064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24923.439117, 22570.815002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24846.294586, 21903.122925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25097.935608, 21192.960999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23437.589142, 18392.344498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26621.861359, 24489.179871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26372.421356, 23629.574310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.763794, 22758.039703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.633698, 21349.683395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.236145, 20021.839523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25007.768158, 19765.829651, 870.000000, 870.000000, 0.000000, X, Y) [Tue Sep 4 01:01:15 2012] Writing fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src10.gif [Tue Sep 4 01:04:38 2012] Mean detx,y = (-4979.22, 4298.19) [Tue Sep 4 01:04:40 2012] Setting backscal keywords in source and bgd. spectrum [Tue Sep 4 01:05:00 2012] grppha failed [Tue Sep 4 01:05:00 2012] Setting source spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src10_src.pi.gz [Tue Sep 4 01:05:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src10_bgd.pi.gz [Tue Sep 4 04:29:58 2012] Updating aperture counts using extracted products [Tue Sep 4 04:29:58 2012] Error reading totcts from fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src10_src.pi.gz [Tue Sep 4 04:30:00 2012] No arf file for this source, not re-computing flux [Tue Sep 4 04:30:08 2012] Flag b found in src. 10 procflags, skipping spectral fitting [Tue Sep 4 04:30:08 2012] Flag c found in src. 10 procflags, skipping spectral fitting [Tue Sep 4 04:30:08 2012] Source 10 has no response, skipping [Tue Sep 4 04:30:09 2012] xmm0111090101/analysis//spectral/fullrun_pn_xmm0111090101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete