[Sun Sep  2 10:34:22 2012] Detection parameters:
  Position = (342.0, 351.5) = 15 3 37.29 -41 44 37.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.6 +/- 18.0
  Background counts = 79.2
  Rate = 0.02 +/- 0.003

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 4.98'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 8.92"
[Sun Sep  2 23:15:39 2012] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.807
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 8.92"
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src73.ximg exists
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src73_1.ximg exists
[Mon Sep  3 04:46:45 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src73 appears to have run properly
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Mon Sep  3 04:46:47 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Mon Sep  3 04:47:36 2012] Warning, spatial fit 73 centroid is now closest to src. 92
[Mon Sep  3 04:47:36 2012] Spatial fit model total counts = 1334.030000, observed total counts = 1343.000000
[Mon Sep  3 04:47:36 2012] Offset between fit and detection position for source 96 = 1.784094 pixels
[Mon Sep  3 04:47:36 2012] Warning, changing simple spatial fit ID from 73 to 89
[Mon Sep  3 04:47:36 2012] 1337.849000 total counts/ 1191.930000 bgd. counts: snr = 4.226554
Spatial fit parameters:
  Offset between fit and detection position for source 96 = 1.784094 pixels
  Position = (343.7, 352.0) = 15 3 36.63 -41 44 32.3
  Extent = 18.1 (17.2-18.5)", rotation angle = 0
  Source counts = 145.9 +/- 36.6
  Background counts = 1191.9
  Rate = 0.02 +/- 0.005
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 48
[Mon Sep  3 18:16:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 18.06"
[Mon Sep  3 18:16:02 2012] source mask rpix=4.2, npix_max = 86, mask sum = 74, frac = 0.855
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 18.06"
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src65.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src65.csv
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src65_1.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src65.csv
[Tue Sep  4 00:59:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Tue Sep  4 00:59:37 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 65 centroid is now closest to src. 92
[Tue Sep  4 01:00:48 2012] Spatial fit model total counts = 3104.230000, observed total counts = 3085.000000
[Tue Sep  4 01:00:48 2012] Offset between fit and detection position for source 96 = 5.630393 pixels
[Tue Sep  4 01:00:48 2012] Warning, changing simple spatial fit ID from 65 to 79
[Tue Sep  4 01:00:48 2012] 3090.121000 total counts/ 2271.120000 bgd. counts: snr = 17.185588
Spatial fit parameters:
  Offset between fit and detection position for source 96 = 5.630393 pixels
  Position = (338.4, 350.1) = 15 3 38.67 -41 44 40.9
  Extent = 35.7 (35.6-71.3)", rotation angle = 0
  Source counts = 819.0 +/- 55.6
  Background counts = 2271.1
  Rate = 0.1 +/- 0.007
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:11 2012] XMMSAS src. selection expression = ellipse(29395.220000, 30407.484000, 2140.404062, 2140.404062, 0.000000, X, Y)
[Tue Sep  4 03:06:11 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src96_src.reg
[Tue Sep  4 03:06:11 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (215, 227) - (461, 473)
[Tue Sep  4 03:06:12 2012] XMMSAS bgd. selection expression = annulus(29395.220000, 30407.484000, 3567.340103, 7134.680205, X, Y) && !ellipse(30018.270000, 33242.936000, 1607.280046, 713.854421, 342.320100, X, Y) && !ellipse(30250.594000, 33351.117800, 1578.488045, 1578.488045, 0.000000, X, Y) && !ellipse(23819.903000, 22976.898000, 2656.712076, 2656.712076, 0.000000, X, Y) && !ellipse(23729.902000, 22145.636000, 1335.168038, 1335.168038, 0.000000, X, Y) && !ellipse(22798.451000, 20953.749800, 2796.496080, 888.456026, 109.120000, X, Y) && !ellipse(24416.654800, 26328.410000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(24858.025600, 25714.195400, 1100.248032, 587.299217, 121.895200, X, Y) && !ellipse(23692.692000, 23145.650000, 1987.616057, 1987.616057, 0.000000, X, Y) && !ellipse(24167.244993, 24262.723017, 1461.312042, 244.971393, 108.649499, X, Y) && !ellipse(24491.373480, 25070.289800, 547.286416, 547.286416, 0.000000, X, Y) && !ellipse(29210.042000, 32866.388000, 3147.480091, 3147.480091, 0.000000, X, Y) && !ellipse(25198.905000, 26234.288000, 1080.384031, 1080.384031, 0.000000, X, Y) && !ellipse(24794.570400, 28036.872000, 1203.856035, 1203.856035, 0.000000, X, Y) && !ellipse(24486.739664, 26836.394948, 1206.384035, 563.235893, 105.816707, X, Y) && !ellipse(23613.733268, 24821.672000, 1685.840049, 531.452015, 98.446180, X, Y) && !ellipse(25408.045400, 28536.552000, 1174.520034, 1174.520034, 0.000000, X, Y) && !ellipse(25486.518000, 26596.798200, 1581.440046, 772.876822, 145.224000, X, Y) && !ellipse(26372.456000, 27469.654000, 1165.688034, 1165.688034, 0.000000, X, Y) && !ellipse(27997.862000, 32419.774000, 2868.248083, 2868.248083, 0.000000, X, Y) && !ellipse(25239.296000, 29144.374000, 1141.768033, 1141.768033, 0.000000, X, Y) && !ellipse(23631.069600, 25057.808000, 1180.904034, 504.935215, 99.541560, X, Y) && !ellipse(31834.416656, 33561.351257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27422.844000, 31242.782000, 1434.128041, 1434.128041, 0.000000, X, Y) && !ellipse(27790.062000, 32719.892000, 2051.960059, 2051.960059, 0.000000, X, Y) && !ellipse(26525.210306, 27970.578368, 1461.231211, 1357.207029, 90.000000, X, Y) && !ellipse(25432.219727, 28050.731750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27309.336000, 31361.046800, 1391.304040, 1391.304040, 0.000000, X, Y) && !ellipse(33991.431488, 33965.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32246.924000, 33596.832000, 2215.360064, 414.061612, 359.826000, X, Y) && !ellipse(27159.462000, 28517.638000, 1253.640036, 1253.640036, 0.000000, X, Y) && !ellipse(25200.770000, 28378.513000, 1202.536035, 1202.536035, 0.000000, X, Y) && !ellipse(24307.052826, 25707.341827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26678.654800, 29720.360000, 963.408028, 963.408028, 0.000000, X, Y) && !ellipse(25727.145691, 30214.025726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26981.642000, 31014.794000, 1405.144040, 1405.144040, 0.000000, X, Y) && !ellipse(25977.374680, 25345.206220, 1071.080031, 1071.080031, 0.000000, X, Y) && !ellipse(28762.534485, 31786.312836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.155518, 28646.815033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23743.152000, 25371.650000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(25986.598000, 27131.410000, 2073.808060, 2073.808060, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(26509.101000, 31713.517100, 748.806422, 748.806422, 0.000000, X, Y) && !ellipse(34595.578000, 33095.150000, 1774.224051, 1774.224051, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(28640.732000, 29818.586000, 1288.072037, 1288.072037, 0.000000, X, Y) && !ellipse(26104.856000, 30406.514000, 2809.976081, 2809.976081, 0.000000, X, Y) && !ellipse(35439.992000, 34299.982000, 1912.040055, 1912.040055, 0.000000, X, Y) && !ellipse(25325.083984, 24576.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30512.220032, 32058.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.201111, 31703.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.611603, 28153.858398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.222000, 31763.240000, 3049.536088, 1823.336052, 309.336000, X, Y) && !ellipse(31698.497742, 32218.323273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(27067.024811, 29358.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.962799, 25438.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29802.326263, 31013.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25444.586853, 25016.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33306.770000, 33873.346000, 1523.488044, 1523.488044, 0.000000, X, Y) && !ellipse(27479.836731, 29794.568268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25257.712616, 23195.076111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35198.322845, 33257.130035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.190000, 31109.172000, 2889.760083, 2889.760083, 0.000000, X, Y) && !ellipse(34900.425903, 32576.664612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31706.968000, 31066.130600, 1524.768044, 1524.768044, 0.000000, X, Y) && !ellipse(32701.096000, 32018.722000, 1672.880048, 1672.880048, 0.000000, X, Y) && !ellipse(26419.601227, 26134.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33344.506000, 32450.334000, 1655.256048, 1655.256048, 0.000000, X, Y) && !ellipse(26149.093567, 23701.151245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.631714, 24127.827728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36592.547760, 34680.419556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30764.086000, 31562.572000, 1540.056044, 1540.056044, 0.000000, X, Y) && !ellipse(27513.441437, 27753.033936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36932.424000, 34898.863400, 1949.496056, 1949.496056, 0.000000, X, Y)
[Tue Sep  4 03:06:12 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src96.gif
[Tue Sep  4 04:10:17 2012] Mean detx,y = (-3408.50, 1632.47) 
[Tue Sep  4 04:10:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 04:11:17 2012] grppha failed
[Tue Sep  4 04:11:17 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src96_src.pi.gz
[Tue Sep  4 04:11:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Tue Sep  4 04:30:02 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:02 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src96_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag c found in src. 96 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 96 has no response, skipping
[Tue Sep  4 04:30:08 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src96_pl.csv not found, spectral fit skipped or did not complete