[Sun Sep  2 10:34:22 2012] Detection parameters:
  Position = (379.3, 370.1) = 15 3 22.81 -41 43 15.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.9 +/- 13.8
  Background counts = 27.4
  Rate = 0.02 +/- 0.003

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 7.83'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Sun Sep  2 23:15:39 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.086
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 93 for pass 0, mean size = 10.35"
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src93.ximg exists
[Mon Sep  3 04:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src93.csv
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src93_1.ximg exists
[Mon Sep  3 04:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src93.csv
[Mon Sep  3 04:46:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Mon Sep  3 04:46:47 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Mon Sep  3 04:47:36 2012] Spatial fit model total counts = 879.263000, observed total counts = 797.000000
[Mon Sep  3 04:47:36 2012] Poor agreement between spatial fit and data for source 85
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:36 2012] Warning, spatial fit 93 centroid is now closest to src. 79
[Mon Sep  3 04:47:36 2012] Spatial fit model total counts = 769.605000, observed total counts = 759.000000
[Mon Sep  3 04:47:36 2012] Offset between fit and detection position for source 85 = 3.232467 pixels
[Mon Sep  3 04:47:36 2012] Warning, changing simple spatial fit ID from 93 to 98
[Mon Sep  3 04:47:36 2012] 750.522000 total counts/ 619.244000 bgd. counts: snr = 5.275469
Spatial fit parameters:
  Offset between fit and detection position for source 85 = 3.232467 pixels
  Position = (376.4, 368.6) = 15 3 23.92 -41 43 20.2
  Extent = 20.9 (20.9-41.8)", rotation angle = 0
  Source counts = 131.3 +/- 27.4
  Background counts = 619.2
  Rate = 0.02 +/- 0.004
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 89
[Mon Sep  3 18:16:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 20.91"
[Mon Sep  3 18:16:02 2012] source mask rpix=4.8, npix_max = 112, mask sum = 117, frac = 1.039
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 83 for pass 1, mean size = 20.91"
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src83.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src83.csv
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src83_1.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src83.csv
[Tue Sep  4 00:59:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Tue Sep  4 00:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src83.csv
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Tue Sep  4 00:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src83.csv
[Tue Sep  4 00:59:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 83 centroid is now closest to src. 94
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:13 2012] XMMSAS src. selection expression = ellipse(32701.096000, 32018.722000, 1254.660036, 1254.660036, 0.000000, X, Y)
[Tue Sep  4 03:06:13 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src85_src.reg
[Tue Sep  4 03:06:13 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (304, 296) - (449, 441)
[Tue Sep  4 03:06:13 2012] XMMSAS bgd. selection expression = annulus(32701.096000, 32018.722000, 2091.100060, 4182.200120, X, Y) && !ellipse(30018.270000, 33242.936000, 1607.280046, 713.854421, 342.320100, X, Y) && !ellipse(30250.594000, 33351.117800, 1578.488045, 1578.488045, 0.000000, X, Y) && !ellipse(29210.042000, 32866.388000, 3147.480091, 3147.480091, 0.000000, X, Y) && !ellipse(27997.862000, 32419.774000, 2868.248083, 2868.248083, 0.000000, X, Y) && !ellipse(31834.416656, 33561.351257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27422.844000, 31242.782000, 1434.128041, 1434.128041, 0.000000, X, Y) && !ellipse(27790.062000, 32719.892000, 2051.960059, 2051.960059, 0.000000, X, Y) && !ellipse(27309.336000, 31361.046800, 1391.304040, 1391.304040, 0.000000, X, Y) && !ellipse(33991.431488, 33965.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32246.924000, 33596.832000, 2215.360064, 414.061612, 359.826000, X, Y) && !ellipse(28762.534485, 31786.312836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(34595.578000, 33095.150000, 1774.224051, 1774.224051, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(28640.732000, 29818.586000, 1288.072037, 1288.072037, 0.000000, X, Y) && !ellipse(26104.856000, 30406.514000, 2809.976081, 2809.976081, 0.000000, X, Y) && !ellipse(35439.992000, 34299.982000, 1912.040055, 1912.040055, 0.000000, X, Y) && !ellipse(30512.220032, 32058.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.201111, 31703.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.222000, 31763.240000, 3049.536088, 1823.336052, 309.336000, X, Y) && !ellipse(31698.497742, 32218.323273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.220000, 30407.484000, 2853.872082, 2853.872082, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(29802.326263, 31013.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33306.770000, 33873.346000, 1523.488044, 1523.488044, 0.000000, X, Y) && !ellipse(35198.322845, 33257.130035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.190000, 31109.172000, 2889.760083, 2889.760083, 0.000000, X, Y) && !ellipse(34900.425903, 32576.664612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31706.968000, 31066.130600, 1524.768044, 1524.768044, 0.000000, X, Y) && !ellipse(33344.506000, 32450.334000, 1655.256048, 1655.256048, 0.000000, X, Y) && !ellipse(36592.547760, 34680.419556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30764.086000, 31562.572000, 1540.056044, 1540.056044, 0.000000, X, Y) && !ellipse(36932.424000, 34898.863400, 1949.496056, 1949.496056, 0.000000, X, Y)
[Tue Sep  4 03:06:13 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src85.gif
[Tue Sep  4 04:23:39 2012] Mean detx,y = (-7172.23, 1881.13) 
[Tue Sep  4 04:23:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 04:24:09 2012] grppha failed
[Tue Sep  4 04:24:09 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src85_src.pi.gz
[Tue Sep  4 04:24:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Tue Sep  4 04:30:02 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:02 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src85_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag p found in src. 85 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Flag c found in src. 85 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 85 has no response, skipping
[Tue Sep  4 04:30:08 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src85_pl.csv not found, spectral fit skipped or did not complete