[Sun Sep  2 10:34:22 2012] Detection parameters:
  Position = (364.9, 370.9) = 15 3 28.39 -41 43 5.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.8 +/- 14.5
  Background counts = 33.1
  Rate = 0.02 +/- 0.003

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 7.13'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Sun Sep  2 23:15:39 2012] source mask rpix=2.3, npix_max = 31, mask sum = 26, frac = 0.831
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 9.99"
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src72.ximg exists
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src72_1.ximg exists
[Mon Sep  3 04:46:45 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src72 appears to have run properly
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Mon Sep  3 04:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Mon Sep  3 04:46:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Mon Sep  3 04:46:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:36 2012] Warning, spatial fit 72 centroid is now closest to src. 86
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 87
[Mon Sep  3 18:16:02 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Mon Sep  3 18:16:02 2012] source mask rpix=2.3, npix_max = 31, mask sum = 26, frac = 0.831
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 64 for pass 1, mean size = 9.99"
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src64.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src64.csv
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src64_1.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src64.csv
[Tue Sep  4 00:59:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Tue Sep  4 00:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src64.csv
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Tue Sep  4 00:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src64.csv
[Tue Sep  4 00:59:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:48 2012] Spatial fit model total counts = 972.772000, observed total counts = 797.000000
[Tue Sep  4 01:00:48 2012] Poor agreement between spatial fit and data for source 80
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 64 centroid is now closest to src. 87
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:11 2012] XMMSAS src. selection expression = ellipse(31698.497742, 32218.323273, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 03:06:11 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src80_src.reg
[Tue Sep  4 03:06:11 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (327, 333) - (402, 408)
[Tue Sep  4 03:06:11 2012] XMMSAS bgd. selection expression = annulus(31698.497742, 32218.323273, 1087.500000, 2175.000000, X, Y) && !ellipse(30018.270000, 33242.936000, 1607.280046, 713.854421, 342.320100, X, Y) && !ellipse(30250.594000, 33351.117800, 1578.488045, 1578.488045, 0.000000, X, Y) && !ellipse(29210.042000, 32866.388000, 3147.480091, 3147.480091, 0.000000, X, Y) && !ellipse(27997.862000, 32419.774000, 2868.248083, 2868.248083, 0.000000, X, Y) && !ellipse(31834.416656, 33561.351257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.062000, 32719.892000, 2051.960059, 2051.960059, 0.000000, X, Y) && !ellipse(33991.431488, 33965.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32246.924000, 33596.832000, 2215.360064, 414.061612, 359.826000, X, Y) && !ellipse(28762.534485, 31786.312836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(34595.578000, 33095.150000, 1774.224051, 1774.224051, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(28640.732000, 29818.586000, 1288.072037, 1288.072037, 0.000000, X, Y) && !ellipse(35439.992000, 34299.982000, 1912.040055, 1912.040055, 0.000000, X, Y) && !ellipse(30512.220032, 32058.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.201111, 31703.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.222000, 31763.240000, 3049.536088, 1823.336052, 309.336000, X, Y) && !ellipse(29395.220000, 30407.484000, 2853.872082, 2853.872082, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(29802.326263, 31013.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33306.770000, 33873.346000, 1523.488044, 1523.488044, 0.000000, X, Y) && !ellipse(30725.190000, 31109.172000, 2889.760083, 2889.760083, 0.000000, X, Y) && !ellipse(31706.968000, 31066.130600, 1524.768044, 1524.768044, 0.000000, X, Y) && !ellipse(32701.096000, 32018.722000, 1672.880048, 1672.880048, 0.000000, X, Y) && !ellipse(33344.506000, 32450.334000, 1655.256048, 1655.256048, 0.000000, X, Y) && !ellipse(30764.086000, 31562.572000, 1540.056044, 1540.056044, 0.000000, X, Y)
[Tue Sep  4 03:06:11 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src80.gif
[Tue Sep  4 04:10:01 2012] Mean detx,y = (-6334.32, 2283.30) 
[Tue Sep  4 04:10:02 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 04:10:14 2012] grppha failed
[Tue Sep  4 04:10:14 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src80_src.pi.gz
[Tue Sep  4 04:10:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src80_bgd.pi.gz
[Tue Sep  4 04:29:43 2012] Not generating rmf since there are only 97 counts
[Tue Sep  4 04:29:43 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:30:02 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:02 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src80_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:08 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src80_pl.csv not found, spectral fit skipped or did not complete