[Sun Sep  2 10:34:22 2012] Detection parameters:
  Position = (383.3, 393.9) = 15 3 21.27 -41 41 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.9 +/- 13.2
  Background counts = 13.0
  Rate = 0.02 +/- 0.003

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 9.26'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Sun Sep  2 23:15:39 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.973
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 80 for pass 0, mean size = 11.06"
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src80.ximg exists
[Mon Sep  3 04:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src80.csv
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src80_1.ximg exists
[Mon Sep  3 04:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src80.csv
[Mon Sep  3 04:46:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Mon Sep  3 04:46:47 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src80 appears to have run properly
[Mon Sep  3 04:47:36 2012] Warning, spatial fit 80 centroid is now closest to src. 25
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 27
[Mon Sep  3 18:16:02 2012] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 11.06"
[Mon Sep  3 18:16:02 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.973
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 11.06"
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src71.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src71.csv
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src71_1.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src71.csv
[Tue Sep  4 00:59:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Tue Sep  4 00:59:37 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Tue Sep  4 01:00:48 2012] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 71 at 13.924085 pixels away
[Tue Sep  4 01:00:48 2012] Spatial fit model total counts = 852.089000, observed total counts = 846.000000
[Tue Sep  4 01:00:48 2012] Offset between fit and detection position for source 71 = 3.966080 pixels
[Tue Sep  4 01:00:48 2012] Warning, changing simple spatial fit ID from 71 to 47
[Tue Sep  4 01:00:48 2012] 462.348000 total counts/ 214.829000 bgd. counts: snr = 16.887373
Spatial fit parameters:
  Offset between fit and detection position for source 71 = 3.966080 pixels
  Position = (383.4, 389.9) = 15 3 21.22 -41 41 47.4
  Extent = 19.0 (19.0-38.1)", rotation angle = 0
  Source counts = 247.5 +/- 21.5
  Background counts = 214.8
  Rate = 0.03 +/- 0.003
[Tue Sep  4 01:00:48 2012] Source 71 is offset by -1.927602 and 0.053241 pixels which is larger than
2 X fitted extent = 1.327991 x 1.327991, not incorporating fit results
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:12 2012] XMMSAS src. selection expression = ellipse(33306.770000, 33873.346000, 1142.616033, 1142.616033, 0.000000, X, Y)
[Tue Sep  4 03:06:12 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src71_src.reg
[Tue Sep  4 03:06:12 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (318, 324) - (449, 456)
[Tue Sep  4 03:06:12 2012] XMMSAS bgd. selection expression = annulus(33306.770000, 33873.346000, 1904.360055, 3808.720110, X, Y) && !ellipse(30018.270000, 33242.936000, 1607.280046, 713.854421, 342.320100, X, Y) && !ellipse(30250.594000, 33351.117800, 1578.488045, 1578.488045, 0.000000, X, Y) && !ellipse(29210.042000, 32866.388000, 3147.480091, 3147.480091, 0.000000, X, Y) && !ellipse(27997.862000, 32419.774000, 2868.248083, 2868.248083, 0.000000, X, Y) && !ellipse(31834.416656, 33561.351257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27790.062000, 32719.892000, 2051.960059, 2051.960059, 0.000000, X, Y) && !ellipse(33991.431488, 33965.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32246.924000, 33596.832000, 2215.360064, 414.061612, 359.826000, X, Y) && !ellipse(28762.534485, 31786.312836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(34595.578000, 33095.150000, 1774.224051, 1774.224051, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(28640.732000, 29818.586000, 1288.072037, 1288.072037, 0.000000, X, Y) && !ellipse(35439.992000, 34299.982000, 1912.040055, 1912.040055, 0.000000, X, Y) && !ellipse(30512.220032, 32058.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.201111, 31703.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.222000, 31763.240000, 3049.536088, 1823.336052, 309.336000, X, Y) && !ellipse(31698.497742, 32218.323273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.220000, 30407.484000, 2853.872082, 2853.872082, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(29802.326263, 31013.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35198.322845, 33257.130035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.190000, 31109.172000, 2889.760083, 2889.760083, 0.000000, X, Y) && !ellipse(34900.425903, 32576.664612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31706.968000, 31066.130600, 1524.768044, 1524.768044, 0.000000, X, Y) && !ellipse(32701.096000, 32018.722000, 1672.880048, 1672.880048, 0.000000, X, Y) && !ellipse(33344.506000, 32450.334000, 1655.256048, 1655.256048, 0.000000, X, Y) && !ellipse(36592.547760, 34680.419556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30764.086000, 31562.572000, 1540.056044, 1540.056044, 0.000000, X, Y) && !ellipse(36932.424000, 34898.863400, 1949.496056, 1949.496056, 0.000000, X, Y)
[Tue Sep  4 03:06:12 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src71.gif
[Tue Sep  4 04:19:52 2012] Mean detx,y = (-8450.11, 3235.17) 
[Tue Sep  4 04:19:53 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 04:20:12 2012] grppha failed
[Tue Sep  4 04:20:12 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src71_src.pi.gz
[Tue Sep  4 04:20:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src71_bgd.pi.gz
[Tue Sep  4 04:30:02 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:02 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src71_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag b found in src. 71 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Flag c found in src. 71 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 71 has no response, skipping
[Tue Sep  4 04:30:08 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src71_pl.csv not found, spectral fit skipped or did not complete