[Sun Sep  2 10:34:21 2012] Detection parameters:
  Position = (331.2, 365.9) = 15 3 41.50 -41 43 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 191.7 +/- 20.5
  Background counts = 41.5
  Rate = 0.03 +/- 0.003

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 5.44'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Sun Sep  2 23:15:39 2012] source mask rpix=2.1, npix_max = 27, mask sum = 28, frac = 1.033
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 9.15"
[Mon Sep  3 04:46:44 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src47.ximg exists
[Mon Sep  3 04:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src47.csv
[Mon Sep  3 04:46:44 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src47_1.ximg exists
[Mon Sep  3 04:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src47.csv
[Mon Sep  3 04:46:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Mon Sep  3 04:46:46 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly
[Mon Sep  3 04:47:35 2012] Source 43 is offset by -2.483535 and 2.248837 pixels which is larger than
2 X fitted extent = 1.074262 x 1.074262, not incorporating fit results
[Mon Sep  3 04:47:35 2012] Warning: source 47 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 10.633726 pixels away
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 2
[Mon Sep  3 18:16:02 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Mon Sep  3 18:16:02 2012] source mask rpix=2.1, npix_max = 27, mask sum = 28, frac = 1.033
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 9.15"
[Tue Sep  4 00:59:33 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src43.ximg exists
[Tue Sep  4 00:59:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src43.csv
[Tue Sep  4 00:59:33 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src43_1.ximg exists
[Tue Sep  4 00:59:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src43.csv
[Tue Sep  4 00:59:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:36 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Tue Sep  4 00:59:36 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Tue Sep  4 00:59:36 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 43 centroid is now closest to src. 29
[Tue Sep  4 01:00:48 2012] Source 43 is offset by -7.733420 and 1.580699 pixels which is larger than
2 X fitted extent = 1.045949 x 1.045949, not incorporating fit results
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:10 2012] XMMSAS src. selection expression = ellipse(28762.534485, 31786.312836, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 03:06:10 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src43_src.reg
[Tue Sep  4 03:06:10 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (294, 328) - (369, 403)
[Tue Sep  4 03:06:10 2012] XMMSAS bgd. selection expression = annulus(28762.534485, 31786.312836, 1087.500000, 2175.000000, X, Y) && !ellipse(30018.270000, 33242.936000, 1607.280046, 713.854421, 342.320100, X, Y) && !ellipse(30250.594000, 33351.117800, 1578.488045, 1578.488045, 0.000000, X, Y) && !ellipse(29210.042000, 32866.388000, 3147.480091, 3147.480091, 0.000000, X, Y) && !ellipse(27997.862000, 32419.774000, 2868.248083, 2868.248083, 0.000000, X, Y) && !ellipse(27422.844000, 31242.782000, 1434.128041, 1434.128041, 0.000000, X, Y) && !ellipse(27790.062000, 32719.892000, 2051.960059, 2051.960059, 0.000000, X, Y) && !ellipse(27309.336000, 31361.046800, 1391.304040, 1391.304040, 0.000000, X, Y) && !ellipse(32246.924000, 33596.832000, 2215.360064, 414.061612, 359.826000, X, Y) && !ellipse(27159.462000, 28517.638000, 1253.640036, 1253.640036, 0.000000, X, Y) && !ellipse(26678.654800, 29720.360000, 963.408028, 963.408028, 0.000000, X, Y) && !ellipse(25727.145691, 30214.025726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26981.642000, 31014.794000, 1405.144040, 1405.144040, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(26509.101000, 31713.517100, 748.806422, 748.806422, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(28640.732000, 29818.586000, 1288.072037, 1288.072037, 0.000000, X, Y) && !ellipse(26104.856000, 30406.514000, 2809.976081, 2809.976081, 0.000000, X, Y) && !ellipse(30512.220032, 32058.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.201111, 31703.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.222000, 31763.240000, 3049.536088, 1823.336052, 309.336000, X, Y) && !ellipse(31698.497742, 32218.323273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.220000, 30407.484000, 2853.872082, 2853.872082, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(27067.024811, 29358.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29802.326263, 31013.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27479.836731, 29794.568268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.190000, 31109.172000, 2889.760083, 2889.760083, 0.000000, X, Y) && !ellipse(31706.968000, 31066.130600, 1524.768044, 1524.768044, 0.000000, X, Y) && !ellipse(30764.086000, 31562.572000, 1540.056044, 1540.056044, 0.000000, X, Y)
[Tue Sep  4 03:06:10 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src43.gif
[Tue Sep  4 03:55:07 2012] Mean detx,y = (-3468.07, 2960.27) 
[Tue Sep  4 03:55:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 03:55:19 2012] grppha failed
[Tue Sep  4 03:55:19 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src43_src.pi.gz
[Tue Sep  4 03:55:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Tue Sep  4 04:29:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 04:29:40 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:30:02 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:02 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src43_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:07 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete