[Sun Sep  2 10:34:21 2012] Detection parameters:
  Position = (313.2, 328.2) = 15 3 48.47 -41 46 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 258.5 +/- 23.9
  Background counts = 78.6
  Rate = 0.04 +/- 0.003

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 2.41'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Sep  2 23:15:39 2012] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.639
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 7.63"
[Mon Sep  3 04:46:44 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src37.ximg exists
[Mon Sep  3 04:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src37.csv
[Mon Sep  3 04:46:44 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src37_1.ximg exists
[Mon Sep  3 04:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src37.csv
[Mon Sep  3 04:46:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Mon Sep  3 04:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Mon Sep  3 04:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Mon Sep  3 04:46:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:35 2012] Warning, spatial fit 37 centroid is now closest to src. 6
[Mon Sep  3 04:47:36 2012] Spatial fit model total counts = 1976.210000, observed total counts = 1906.000000
[Mon Sep  3 04:47:36 2012] Offset between fit and detection position for source 34 = 0.304153 pixels
[Mon Sep  3 04:47:36 2012] Warning, changing simple spatial fit ID from 37 to 61
[Mon Sep  3 04:47:36 2012] 1981.631000 total counts/ 1719.720000 bgd. counts: snr = 6.315749
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.304153 pixels
  Position = (313.0, 328.4) = 15 3 48.55 -41 46 15.1
  Extent = 15.7 (15.6-31.3)", rotation angle = 0
  Source counts = 261.9 +/- 44.5
  Background counts = 1719.7
  Rate = 0.03 +/- 0.006
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 35
[Mon Sep  3 04:47:36 2012] Source is confused with source 51
[Mon Sep  3 04:47:36 2012] Source is confused with source 101
[Mon Sep  3 04:47:36 2012] Source is confused with source 102
[Mon Sep  3 04:47:36 2012] Source is confused with source 100
[Mon Sep  3 04:47:36 2012] Source is confused with source 103
[Mon Sep  3 18:16:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 15.67"
[Mon Sep  3 18:16:02 2012] source mask rpix=3.6, npix_max = 67, mask sum = 49, frac = 0.728
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 15.67"
[Tue Sep  4 00:59:33 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src36.ximg exists
[Tue Sep  4 00:59:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src36.csv
[Tue Sep  4 00:59:33 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src36_1.ximg exists
[Tue Sep  4 00:59:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src36.csv
[Tue Sep  4 00:59:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:36 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Tue Sep  4 00:59:36 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Tue Sep  4 00:59:36 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 36 centroid is now closest to src. 97
[Tue Sep  4 01:00:48 2012] Spatial fit model total counts = 1982.190000, observed total counts = 1906.000000
[Tue Sep  4 01:00:48 2012] Offset between fit and detection position for source 34 = 0.310600 pixels
[Tue Sep  4 01:00:48 2012] Warning, changing simple spatial fit ID from 36 to 54
[Tue Sep  4 01:00:48 2012] 2011.075000 total counts/ 1751.590000 bgd. counts: snr = 6.200062
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 0.310600 pixels
  Position = (312.7, 328.3) = 15 3 48.66 -41 46 15.5
  Extent = 15.7 (15.6-31.3)", rotation angle = 0
  Source counts = 259.5 +/- 44.8
  Background counts = 1751.6
  Rate = 0.03 +/- 0.006
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:09 2012] XMMSAS src. selection expression = ellipse(27159.462000, 28517.638000, 940.230027, 940.230027, 0.000000, X, Y)
[Tue Sep  4 03:06:09 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src34_src.reg
[Tue Sep  4 03:06:09 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (259, 274) - (367, 382)
[Tue Sep  4 03:06:09 2012] XMMSAS bgd. selection expression = annulus(27159.462000, 28517.638000, 1567.050045, 3134.100090, X, Y) && !ellipse(30018.270000, 33242.936000, 1607.280046, 713.854421, 342.320100, X, Y) && !ellipse(23819.903000, 22976.898000, 2656.712076, 2656.712076, 0.000000, X, Y) && !ellipse(24416.654800, 26328.410000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(24858.025600, 25714.195400, 1100.248032, 587.299217, 121.895200, X, Y) && !ellipse(24167.244993, 24262.723017, 1461.312042, 244.971393, 108.649499, X, Y) && !ellipse(24491.373480, 25070.289800, 547.286416, 547.286416, 0.000000, X, Y) && !ellipse(29210.042000, 32866.388000, 3147.480091, 3147.480091, 0.000000, X, Y) && !ellipse(25198.905000, 26234.288000, 1080.384031, 1080.384031, 0.000000, X, Y) && !ellipse(24794.570400, 28036.872000, 1203.856035, 1203.856035, 0.000000, X, Y) && !ellipse(24486.739664, 26836.394948, 1206.384035, 563.235893, 105.816707, X, Y) && !ellipse(23613.733268, 24821.672000, 1685.840049, 531.452015, 98.446180, X, Y) && !ellipse(25408.045400, 28536.552000, 1174.520034, 1174.520034, 0.000000, X, Y) && !ellipse(25486.518000, 26596.798200, 1581.440046, 772.876822, 145.224000, X, Y) && !ellipse(26372.456000, 27469.654000, 1165.688034, 1165.688034, 0.000000, X, Y) && !ellipse(27997.862000, 32419.774000, 2868.248083, 2868.248083, 0.000000, X, Y) && !ellipse(25239.296000, 29144.374000, 1141.768033, 1141.768033, 0.000000, X, Y) && !ellipse(23631.069600, 25057.808000, 1180.904034, 504.935215, 99.541560, X, Y) && !ellipse(27422.844000, 31242.782000, 1434.128041, 1434.128041, 0.000000, X, Y) && !ellipse(27790.062000, 32719.892000, 2051.960059, 2051.960059, 0.000000, X, Y) && !ellipse(26525.210306, 27970.578368, 1461.231211, 1357.207029, 90.000000, X, Y) && !ellipse(25432.219727, 28050.731750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27309.336000, 31361.046800, 1391.304040, 1391.304040, 0.000000, X, Y) && !ellipse(32246.924000, 33596.832000, 2215.360064, 414.061612, 359.826000, X, Y) && !ellipse(25200.770000, 28378.513000, 1202.536035, 1202.536035, 0.000000, X, Y) && !ellipse(24307.052826, 25707.341827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26678.654800, 29720.360000, 963.408028, 963.408028, 0.000000, X, Y) && !ellipse(25727.145691, 30214.025726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26981.642000, 31014.794000, 1405.144040, 1405.144040, 0.000000, X, Y) && !ellipse(25977.374680, 25345.206220, 1071.080031, 1071.080031, 0.000000, X, Y) && !ellipse(28762.534485, 31786.312836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.155518, 28646.815033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23743.152000, 25371.650000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(25986.598000, 27131.410000, 2073.808060, 2073.808060, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(26509.101000, 31713.517100, 748.806422, 748.806422, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(28640.732000, 29818.586000, 1288.072037, 1288.072037, 0.000000, X, Y) && !ellipse(26104.856000, 30406.514000, 2809.976081, 2809.976081, 0.000000, X, Y) && !ellipse(25325.083984, 24576.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30512.220032, 32058.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.611603, 28153.858398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.222000, 31763.240000, 3049.536088, 1823.336052, 309.336000, X, Y) && !ellipse(29395.220000, 30407.484000, 2853.872082, 2853.872082, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(27067.024811, 29358.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.962799, 25438.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29802.326263, 31013.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25444.586853, 25016.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27479.836731, 29794.568268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.190000, 31109.172000, 2889.760083, 2889.760083, 0.000000, X, Y) && !ellipse(31706.968000, 31066.130600, 1524.768044, 1524.768044, 0.000000, X, Y) && !ellipse(26419.601227, 26134.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30764.086000, 31562.572000, 1540.056044, 1540.056044, 0.000000, X, Y) && !ellipse(27513.441437, 27753.033936, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 03:06:09 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src34.gif
[Tue Sep  4 03:53:10 2012] Mean detx,y = (-873.11, 377.32) 
[Tue Sep  4 03:53:11 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 03:53:22 2012] grppha failed
[Tue Sep  4 03:53:22 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src34_src.pi.gz
[Tue Sep  4 03:53:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Tue Sep  4 04:30:01 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:01 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src34_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag c found in src. 34 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 34 has no response, skipping
[Tue Sep  4 04:30:07 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src34_pl.csv not found, spectral fit skipped or did not complete