[Sun Sep  2 10:34:21 2012] Detection parameters:
  Position = (320.2, 366.1) = 15 3 45.76 -41 43 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 261.3 +/- 23.3
  Background counts = 32.1
  Rate = 0.04 +/- 0.004

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 5.15'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Sun Sep  2 23:15:39 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.136
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 9.00"
[Mon Sep  3 04:46:44 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src33.ximg exists
[Mon Sep  3 04:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src33.csv
[Mon Sep  3 04:46:44 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Sep  3 04:46:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src33.csv
[Mon Sep  3 04:46:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Sep  3 04:46:46 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Sep  3 04:47:35 2012] Warning, spatial fit 33 centroid is now closest to src. 31
[Mon Sep  3 04:47:35 2012] Spatial fit model total counts = 1677.090000, observed total counts = 1657.000000
[Mon Sep  3 04:47:35 2012] Offset between fit and detection position for source 29 = 7.643494 pixels
[Mon Sep  3 04:47:35 2012] Warning, changing simple spatial fit ID from 33 to 44
[Mon Sep  3 04:47:35 2012] 1663.366000 total counts/ 1518.970000 bgd. counts: snr = 3.704935
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 7.643494 pixels
  Position = (314.5, 361.0) = 15 3 47.99 -41 43 53.3
  Extent = 17.4 (17.4-34.8)", rotation angle = 0
  Source counts = 144.4 +/- 40.8
  Background counts = 1519.0
  Rate = 0.02 +/- 0.005
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 31
[Mon Sep  3 18:16:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 17.39"
[Mon Sep  3 18:16:02 2012] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.001
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 17.39"
[Tue Sep  4 00:59:33 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src32.ximg exists
[Tue Sep  4 00:59:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src32.csv
[Tue Sep  4 00:59:33 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Sep  4 00:59:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src32.csv
[Tue Sep  4 00:59:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:36 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Sep  4 00:59:36 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Sep  4 00:59:36 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 32 centroid is now closest to src. 28
[Tue Sep  4 01:00:48 2012] Source 29 is offset by -9.020552 and 2.440492 pixels which is larger than
2 X fitted extent = 1.051623 x 1.051623, not incorporating fit results
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:09 2012] XMMSAS src. selection expression = ellipse(27309.336000, 31361.046800, 1043.478030, 1043.478030, 0.000000, X, Y)
[Tue Sep  4 03:06:09 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src29_src.reg
[Tue Sep  4 03:06:09 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (254, 301) - (374, 421)
[Tue Sep  4 03:06:09 2012] XMMSAS bgd. selection expression = annulus(27309.336000, 31361.046800, 1739.130050, 3478.260100, X, Y) && !ellipse(30018.270000, 33242.936000, 1607.280046, 713.854421, 342.320100, X, Y) && !ellipse(30250.594000, 33351.117800, 1578.488045, 1578.488045, 0.000000, X, Y) && !ellipse(29210.042000, 32866.388000, 3147.480091, 3147.480091, 0.000000, X, Y) && !ellipse(24794.570400, 28036.872000, 1203.856035, 1203.856035, 0.000000, X, Y) && !ellipse(24486.739664, 26836.394948, 1206.384035, 563.235893, 105.816707, X, Y) && !ellipse(25408.045400, 28536.552000, 1174.520034, 1174.520034, 0.000000, X, Y) && !ellipse(25486.518000, 26596.798200, 1581.440046, 772.876822, 145.224000, X, Y) && !ellipse(26372.456000, 27469.654000, 1165.688034, 1165.688034, 0.000000, X, Y) && !ellipse(27997.862000, 32419.774000, 2868.248083, 2868.248083, 0.000000, X, Y) && !ellipse(25239.296000, 29144.374000, 1141.768033, 1141.768033, 0.000000, X, Y) && !ellipse(27422.844000, 31242.782000, 1434.128041, 1434.128041, 0.000000, X, Y) && !ellipse(27790.062000, 32719.892000, 2051.960059, 2051.960059, 0.000000, X, Y) && !ellipse(26525.210306, 27970.578368, 1461.231211, 1357.207029, 90.000000, X, Y) && !ellipse(25432.219727, 28050.731750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32246.924000, 33596.832000, 2215.360064, 414.061612, 359.826000, X, Y) && !ellipse(27159.462000, 28517.638000, 1253.640036, 1253.640036, 0.000000, X, Y) && !ellipse(25200.770000, 28378.513000, 1202.536035, 1202.536035, 0.000000, X, Y) && !ellipse(26678.654800, 29720.360000, 963.408028, 963.408028, 0.000000, X, Y) && !ellipse(25727.145691, 30214.025726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26981.642000, 31014.794000, 1405.144040, 1405.144040, 0.000000, X, Y) && !ellipse(28762.534485, 31786.312836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.155518, 28646.815033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25986.598000, 27131.410000, 2073.808060, 2073.808060, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(26509.101000, 31713.517100, 748.806422, 748.806422, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(28640.732000, 29818.586000, 1288.072037, 1288.072037, 0.000000, X, Y) && !ellipse(26104.856000, 30406.514000, 2809.976081, 2809.976081, 0.000000, X, Y) && !ellipse(30512.220032, 32058.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.201111, 31703.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.611603, 28153.858398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.222000, 31763.240000, 3049.536088, 1823.336052, 309.336000, X, Y) && !ellipse(29395.220000, 30407.484000, 2853.872082, 2853.872082, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(27067.024811, 29358.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29802.326263, 31013.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27479.836731, 29794.568268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.190000, 31109.172000, 2889.760083, 2889.760083, 0.000000, X, Y) && !ellipse(31706.968000, 31066.130600, 1524.768044, 1524.768044, 0.000000, X, Y) && !ellipse(30764.086000, 31562.572000, 1540.056044, 1540.056044, 0.000000, X, Y) && !ellipse(27513.441437, 27753.033936, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 03:06:09 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src29.gif
[Tue Sep  4 03:51:48 2012] Mean detx,y = (-2016.53, 3014.67) 
[Tue Sep  4 03:51:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 03:52:02 2012] grppha failed
[Tue Sep  4 03:52:02 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src29_src.pi.gz
[Tue Sep  4 03:52:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Sep  4 04:30:01 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:01 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src29_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag b found in src. 29 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Flag c found in src. 29 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 29 has no response, skipping
[Tue Sep  4 04:30:07 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete