[Sun Sep  2 10:34:21 2012] Detection parameters:
  Position = (257.9, 214.8) = 15 4 10.01 -41 54 29.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.3 +/- 20.6
  Background counts = 38.0
  Rate = 0.06 +/- 0.005

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 6.74'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Sun Sep  2 23:15:39 2012] source mask rpix=2.3, npix_max = 30, mask sum = 34, frac = 1.122
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 9.80"
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src18.ximg exists
[Mon Sep  3 04:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src18.csv
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Sep  3 04:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src18.csv
[Mon Sep  3 04:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Sep  3 04:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Sep  3 04:46:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Sep  3 04:46:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:35 2012] Warning, spatial fit 18 centroid is now closest to src. 39
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 18:16:02 2012] Using EEF radius (= 9.80 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 9.80"
[Mon Sep  3 18:16:02 2012] source mask rpix=2.3, npix_max = 30, mask sum = 34, frac = 1.122
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 9.80"
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src18.ximg exists
[Tue Sep  4 00:59:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src18.csv
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src18_1.ximg exists
[Tue Sep  4 00:59:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src18.csv
[Tue Sep  4 00:59:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Tue Sep  4 00:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Tue Sep  4 00:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Tue Sep  4 00:59:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:48 2012] Warning: source 18 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 11.182648 pixels away
[Tue Sep  4 01:00:48 2012] Source 23 is offset by -3.100600 and -4.572552 pixels which is larger than
2 X fitted extent = 1.373701 x 1.373701, not incorporating fit results
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 01:00:49 2012] Source is confused with source 39
[Tue Sep  4 03:06:08 2012] XMMSAS src. selection expression = ellipse(22390.097778, 18637.035980, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 03:06:08 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src23_src.reg
[Tue Sep  4 03:06:08 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (220, 177) - (295, 252)
[Tue Sep  4 03:06:08 2012] XMMSAS bgd. selection expression = annulus(22390.097778, 18637.035980, 1087.500000, 2175.000000, X, Y) && !ellipse(23819.903000, 22976.898000, 2656.712076, 2656.712076, 0.000000, X, Y) && !ellipse(22549.861511, 20230.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.902000, 22145.636000, 1335.168038, 1335.168038, 0.000000, X, Y) && !ellipse(22798.451000, 20953.749800, 2796.496080, 888.456026, 109.120000, X, Y) && !ellipse(22892.332944, 21421.942145, 1180.904034, 634.993844, 112.623009, X, Y) && !ellipse(22243.903800, 18091.250000, 1121.008032, 1121.008032, 0.000000, X, Y) && !ellipse(22380.369751, 17193.870911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23819.138092, 21182.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24421.670441, 21533.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23325.857544, 19143.867798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.668000, 17077.489400, 1640.856047, 1640.856047, 0.000000, X, Y) && !ellipse(23924.918000, 18736.565400, 1532.120044, 1532.120044, 0.000000, X, Y) && !ellipse(22152.853653, 19539.613190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21678.596390, 15944.440674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21701.740280, 17180.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21955.814636, 16394.124313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.105957, 21526.664993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22319.057159, 15696.795471, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 03:06:08 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src23.gif
[Tue Sep  4 03:40:30 2012] Mean detx,y = (6973.84, -7325.37) 
[Tue Sep  4 03:40:31 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 03:40:45 2012] grppha failed
[Tue Sep  4 03:40:45 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src23_src.pi.gz
[Tue Sep  4 03:40:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue Sep  4 04:29:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep  4 04:29:36 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:30:01 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:01 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src23_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:07 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete