[Sun Sep  2 10:34:21 2012] Detection parameters:
  Position = (268.0, 256.0) = 15 4 6.06 -41 51 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 451.3 +/- 28.4
  Background counts = 38.2
  Rate = 0.08 +/- 0.005

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 3.79'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Sun Sep  2 23:15:39 2012] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.687
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.32"
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src5.ximg exists
[Mon Sep  3 04:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src5.csv
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon Sep  3 04:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src5.csv
[Mon Sep  3 04:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Sep  3 04:46:45 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Sep  3 04:47:35 2012] Warning, spatial fit 5 centroid is now closest to src. 18
[Mon Sep  3 04:47:35 2012] Spatial fit model total counts = 2282.220000, observed total counts = 2277.000000
[Mon Sep  3 04:47:35 2012] Offset between fit and detection position for source 19 = 4.300816 pixels
[Mon Sep  3 04:47:35 2012] Warning, changing simple spatial fit ID from 5 to 34
[Mon Sep  3 04:47:35 2012] 2218.138000 total counts/ 2040.270000 bgd. counts: snr = 3.937803
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 4.300816 pixels
  Position = (272.1, 257.3) = 15 4 4.47 -41 51 24.3
  Extent = 16.8 (16.7-33.5)", rotation angle = 0
  Source counts = 177.9 +/- 47.1
  Background counts = 2040.3
  Rate = 0.02 +/- 0.006
[Mon Sep  3 04:47:36 2012] Spatial fit model total counts = 1670.420000, observed total counts = 1670.000000
[Mon Sep  3 04:47:36 2012] Offset between fit and detection position for source 19 = 2.544200 pixels
[Mon Sep  3 04:47:36 2012] Warning, changing simple spatial fit ID from 34 to 63
[Mon Sep  3 04:47:36 2012] 1643.988000 total counts/ 1492.220000 bgd. counts: snr = 3.928835
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.544200 pixels
  Position = (273.3, 255.1) = 15 4 4.00 -41 51 34.1
  Extent = 16.7 (16.6-16.7)", rotation angle = 0
  Source counts = 151.8 +/- 40.5
  Background counts = 1492.2
  Rate = 0.02 +/- 0.005
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 17
[Mon Sep  3 18:16:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 16.69"
[Mon Sep  3 18:16:02 2012] source mask rpix=3.8, npix_max = 75, mask sum = 72, frac = 0.957
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 16.69"
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Sep  4 00:59:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src5.csv
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Sep  4 00:59:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src5.csv
[Tue Sep  4 00:59:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Sep  4 00:59:35 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 5 centroid is now closest to src. 17
[Tue Sep  4 01:00:48 2012] Source 19 is offset by 7.150529 and -2.265816 pixels which is larger than
2 X fitted extent = 1.357812 x 1.357812, not incorporating fit results
[Tue Sep  4 01:00:48 2012] Source 19 is offset by -4.270851 and 2.177678 pixels which is larger than
2 X fitted extent = 2.616846 x 2.616846, not incorporating fit results
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:07 2012] XMMSAS src. selection expression = ellipse(23729.902000, 22145.636000, 1001.376029, 1001.376029, 0.000000, X, Y)
[Tue Sep  4 03:06:07 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src19_src.reg
[Tue Sep  4 03:06:07 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (216, 198) - (331, 313)
[Tue Sep  4 03:06:07 2012] XMMSAS bgd. selection expression = annulus(23729.902000, 22145.636000, 1668.960048, 3337.920096, X, Y) && !ellipse(23819.903000, 22976.898000, 2656.712076, 2656.712076, 0.000000, X, Y) && !ellipse(22549.861511, 20230.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22798.451000, 20953.749800, 2796.496080, 888.456026, 109.120000, X, Y) && !ellipse(24416.654800, 26328.410000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(24858.025600, 25714.195400, 1100.248032, 587.299217, 121.895200, X, Y) && !ellipse(23692.692000, 23145.650000, 1987.616057, 1987.616057, 0.000000, X, Y) && !ellipse(24167.244993, 24262.723017, 1461.312042, 244.971393, 108.649499, X, Y) && !ellipse(24491.373480, 25070.289800, 547.286416, 547.286416, 0.000000, X, Y) && !ellipse(25198.905000, 26234.288000, 1080.384031, 1080.384031, 0.000000, X, Y) && !ellipse(23613.733268, 24821.672000, 1685.840049, 531.452015, 98.446180, X, Y) && !ellipse(22892.332944, 21421.942145, 1180.904034, 634.993844, 112.623009, X, Y) && !ellipse(22390.097778, 18637.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25486.518000, 26596.798200, 1581.440046, 772.876822, 145.224000, X, Y) && !ellipse(23631.069600, 25057.808000, 1180.904034, 504.935215, 99.541560, X, Y) && !ellipse(22243.903800, 18091.250000, 1121.008032, 1121.008032, 0.000000, X, Y) && !ellipse(24307.052826, 25707.341827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25977.374680, 25345.206220, 1071.080031, 1071.080031, 0.000000, X, Y) && !ellipse(23743.152000, 25371.650000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(25986.598000, 27131.410000, 2073.808060, 2073.808060, 0.000000, X, Y) && !ellipse(23819.138092, 21182.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24421.670441, 21533.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25325.083984, 24576.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.962799, 25438.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25444.586853, 25016.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23325.857544, 19143.867798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25257.712616, 23195.076111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23924.918000, 18736.565400, 1532.120044, 1532.120044, 0.000000, X, Y) && !ellipse(26419.601227, 26134.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22152.853653, 19539.613190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26149.093567, 23701.151245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.631714, 24127.827728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.105957, 21526.664993, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 03:06:07 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src19.gif
[Tue Sep  4 03:19:33 2012] Mean detx,y = (4553.17, -4360.45) 
[Tue Sep  4 03:19:34 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 03:19:52 2012] grppha failed
[Tue Sep  4 03:19:52 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src19_src.pi.gz
[Tue Sep  4 03:19:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Tue Sep  4 04:30:01 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:01 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src19_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Flag c found in src. 19 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 19 has no response, skipping
[Tue Sep  4 04:30:07 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete