[Sun Sep  2 10:34:20 2012] Detection parameters:
  Position = (271.9, 283.1) = 15 4 4.55 -41 49 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 374.3 +/- 26.1
  Background counts = 26.7
  Rate = 0.06 +/- 0.004

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 2.22'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 7.54 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Sun Sep  2 23:15:39 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 7.54"
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src16.ximg exists
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Sep  3 04:46:43 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src16 appears to have run properly
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Sep  3 04:46:46 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Sep  3 04:46:46 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Sep  3 04:47:35 2012] Spatial fit model total counts = 1679.790000, observed total counts = 1668.000000
[Mon Sep  3 04:47:35 2012] Offset between fit and detection position for source 15 = 1.452296 pixels
[Mon Sep  3 04:47:35 2012] 1698.367000 total counts/ 1450.110000 bgd. counts: snr = 6.519301
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.452296 pixels
  Position = (271.6, 284.5) = 15 4 4.65 -41 49 26.1
  Extent = 15.1 (14.9-30.2)" x 5.7 (4.5-7.0)", rotation angle = 95 (87-103) degrees
  Source counts = 248.3 +/- 41.2
  Background counts = 1450.1
  Rate = 0.03 +/- 0.006
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.12
[Mon Sep  3 04:47:36 2012] Source is asymmetric
[Mon Sep  3 04:47:36 2012] Source is confused with source 16
[Mon Sep  3 18:16:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 10.41"
[Mon Sep  3 18:16:02 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.896
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 10.41"
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Sep  4 00:59:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src16.csv
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Sep  4 00:59:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src16.csv
[Tue Sep  4 00:59:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Sep  4 00:59:35 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 16 centroid is now closest to src. 53
[Tue Sep  4 01:00:48 2012] Spatial fit model total counts = 1466.940000, observed total counts = 1468.000000
[Tue Sep  4 01:00:48 2012] Offset between fit and detection position for source 15 = 1.397999 pixels
[Tue Sep  4 01:00:48 2012] Warning, changing simple spatial fit ID from 16 to 24
[Tue Sep  4 01:00:48 2012] 1465.401000 total counts/ 1110.170000 bgd. counts: snr = 10.661446
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 1.397999 pixels
  Position = (272.0, 285.9) = 15 4 4.52 -41 49 20.3
  Extent = 21.1 (21.0-42.1)" x 6.6 (5.4-8.1)", rotation angle = 98 (93-104) degrees
  Source counts = 355.2 +/- 38.3
  Background counts = 1110.2
  Rate = 0.05 +/- 0.005
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.58
[Tue Sep  4 01:00:48 2012] Source is asymmetric
[Tue Sep  4 03:06:08 2012] XMMSAS src. selection expression = ellipse(23613.733268, 24821.672000, 1264.380036, 398.589011, 98.446180, X, Y)
[Tue Sep  4 03:06:08 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src15_src.reg
[Tue Sep  4 03:06:08 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (199, 213) - (345, 359)
[Tue Sep  4 03:06:08 2012] XMMSAS bgd. selection expression = annulus(23613.733268, 24821.672000, 2107.300061, 4214.600121, X, Y) && !ellipse(23819.903000, 22976.898000, 2656.712076, 2656.712076, 0.000000, X, Y) && !ellipse(22549.861511, 20230.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.902000, 22145.636000, 1335.168038, 1335.168038, 0.000000, X, Y) && !ellipse(22798.451000, 20953.749800, 2796.496080, 888.456026, 109.120000, X, Y) && !ellipse(24416.654800, 26328.410000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(24858.025600, 25714.195400, 1100.248032, 587.299217, 121.895200, X, Y) && !ellipse(23692.692000, 23145.650000, 1987.616057, 1987.616057, 0.000000, X, Y) && !ellipse(24167.244993, 24262.723017, 1461.312042, 244.971393, 108.649499, X, Y) && !ellipse(24491.373480, 25070.289800, 547.286416, 547.286416, 0.000000, X, Y) && !ellipse(25198.905000, 26234.288000, 1080.384031, 1080.384031, 0.000000, X, Y) && !ellipse(24794.570400, 28036.872000, 1203.856035, 1203.856035, 0.000000, X, Y) && !ellipse(24486.739664, 26836.394948, 1206.384035, 563.235893, 105.816707, X, Y) && !ellipse(22892.332944, 21421.942145, 1180.904034, 634.993844, 112.623009, X, Y) && !ellipse(25408.045400, 28536.552000, 1174.520034, 1174.520034, 0.000000, X, Y) && !ellipse(25486.518000, 26596.798200, 1581.440046, 772.876822, 145.224000, X, Y) && !ellipse(26372.456000, 27469.654000, 1165.688034, 1165.688034, 0.000000, X, Y) && !ellipse(25239.296000, 29144.374000, 1141.768033, 1141.768033, 0.000000, X, Y) && !ellipse(23631.069600, 25057.808000, 1180.904034, 504.935215, 99.541560, X, Y) && !ellipse(26525.210306, 27970.578368, 1461.231211, 1357.207029, 90.000000, X, Y) && !ellipse(25432.219727, 28050.731750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27159.462000, 28517.638000, 1253.640036, 1253.640036, 0.000000, X, Y) && !ellipse(25200.770000, 28378.513000, 1202.536035, 1202.536035, 0.000000, X, Y) && !ellipse(24307.052826, 25707.341827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26678.654800, 29720.360000, 963.408028, 963.408028, 0.000000, X, Y) && !ellipse(25977.374680, 25345.206220, 1071.080031, 1071.080031, 0.000000, X, Y) && !ellipse(26439.155518, 28646.815033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23743.152000, 25371.650000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(25986.598000, 27131.410000, 2073.808060, 2073.808060, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(23819.138092, 21182.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(28640.732000, 29818.586000, 1288.072037, 1288.072037, 0.000000, X, Y) && !ellipse(24421.670441, 21533.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26104.856000, 30406.514000, 2809.976081, 2809.976081, 0.000000, X, Y) && !ellipse(25325.083984, 24576.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.611603, 28153.858398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.220000, 30407.484000, 2853.872082, 2853.872082, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(27067.024811, 29358.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.962799, 25438.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25444.586853, 25016.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27479.836731, 29794.568268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25257.712616, 23195.076111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.601227, 26134.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26149.093567, 23701.151245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.631714, 24127.827728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.105957, 21526.664993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27513.441437, 27753.033936, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 03:06:08 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src15.gif
[Tue Sep  4 03:39:42 2012] Mean detx,y = (3738.11, -2066.84) 
[Tue Sep  4 03:39:43 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 03:40:09 2012] grppha failed
[Tue Sep  4 03:40:10 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Sep  4 03:40:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Tue Sep  4 04:30:01 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:01 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src15_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag c found in src. 15 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 15 has no response, skipping
[Tue Sep  4 04:30:07 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete