[Sun Sep  2 10:34:23 2012] Detection parameters:
  Position = (271.3, 216.0) = 15 4 4.81 -41 54 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.3 +/- 15.3
  Background counts = 57.3
  Rate = 0.02 +/- 0.003

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 6.29'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Sun Sep  2 23:15:39 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.028
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 94 for pass 0, mean size = 9.58"
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src94.ximg exists
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src94_1.ximg exists
[Mon Sep  3 04:46:45 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src94 appears to have run properly
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Mon Sep  3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Mon Sep  3 04:46:47 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src94 appears to have run properly
[Mon Sep  3 04:47:35 2012] Source 128 is offset by 4.739855 and 7.465899 pixels which is larger than
2 X fitted extent = 1.189628 x 1.189628, not incorporating fit results
[Mon Sep  3 04:47:36 2012] Spatial fit model total counts = 1200.050000, observed total counts = 958.000000
[Mon Sep  3 04:47:36 2012] Poor agreement between spatial fit and data for source 128
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Sep  3 04:47:36 2012] Spatial fit model total counts = 995.321000, observed total counts = 929.000000
[Mon Sep  3 04:47:36 2012] Offset between fit and detection position for source 128 = 4.300118 pixels
[Mon Sep  3 04:47:36 2012] 958.453000 total counts/ 807.749000 bgd. counts: snr = 5.302572
Spatial fit parameters:
  Offset between fit and detection position for source 128 = 4.300118 pixels
  Position = (275.6, 215.9) = 15 4 3.14 -41 54 24.5
  Extent = 19.2 (19.1-38.3)", rotation angle = 0
  Source counts = 150.7 +/- 31.0
  Background counts = 807.7
  Rate = 0.02 +/- 0.004
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 125
[Mon Sep  3 18:16:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 19.15"
[Mon Sep  3 18:16:02 2012] source mask rpix=4.4, npix_max = 96, mask sum = 90, frac = 0.936
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 84 for pass 1, mean size = 19.15"
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src84.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src84.csv
[Tue Sep  4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src84_1.ximg exists
[Tue Sep  4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src84.csv
[Tue Sep  4 00:59:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src84.ximg exists
[Tue Sep  4 00:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src84.csv
[Tue Sep  4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg exists
[Tue Sep  4 00:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src84.csv
[Tue Sep  4 00:59:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 84 centroid is now closest to src. 125
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:13 2012] XMMSAS src. selection expression = ellipse(23924.918000, 18736.565400, 1149.090033, 1149.090033, 0.000000, X, Y)
[Tue Sep  4 03:06:13 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src128_src.reg
[Tue Sep  4 03:06:13 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (210, 150) - (342, 282)
[Tue Sep  4 03:06:13 2012] XMMSAS bgd. selection expression = annulus(23924.918000, 18736.565400, 1915.150055, 3830.300110, X, Y) && !ellipse(23819.903000, 22976.898000, 2656.712076, 2656.712076, 0.000000, X, Y) && !ellipse(22549.861511, 20230.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.902000, 22145.636000, 1335.168038, 1335.168038, 0.000000, X, Y) && !ellipse(22798.451000, 20953.749800, 2796.496080, 888.456026, 109.120000, X, Y) && !ellipse(23692.692000, 23145.650000, 1987.616057, 1987.616057, 0.000000, X, Y) && !ellipse(22892.332944, 21421.942145, 1180.904034, 634.993844, 112.623009, X, Y) && !ellipse(22390.097778, 18637.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22243.903800, 18091.250000, 1121.008032, 1121.008032, 0.000000, X, Y) && !ellipse(22380.369751, 17193.870911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23819.138092, 21182.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24421.670441, 21533.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23325.857544, 19143.867798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25257.712616, 23195.076111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23725.668000, 17077.489400, 1640.856047, 1640.856047, 0.000000, X, Y) && !ellipse(22152.853653, 19539.613190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21678.596390, 15944.440674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22322.747650, 15092.456375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21701.740280, 17180.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21955.814636, 16394.124313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.105957, 21526.664993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22319.057159, 15696.795471, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 03:06:13 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src128.gif
[Tue Sep  4 04:24:12 2012] Mean detx,y = (5618.80, -7687.51) 
[Tue Sep  4 04:24:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 04:24:40 2012] grppha failed
[Tue Sep  4 04:24:40 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src128_src.pi.gz
[Tue Sep  4 04:24:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src128_bgd.pi.gz
[Tue Sep  4 04:30:02 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:02 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src128_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag b found in src. 128 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Flag p found in src. 128 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Flag c found in src. 128 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 128 has no response, skipping
[Tue Sep  4 04:30:08 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src128_pl.csv not found, spectral fit skipped or did not complete