[Sun Sep 2 10:34:23 2012] Detection parameters: Position = (290.9, 267.2) = 15 3 57.16 -41 50 43.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 115.9 +/- 18.1 Background counts = 52.2 Rate = 0.02 +/- 0.003 [Sun Sep 2 10:34:23 2012] Off-axis axis estimate = 2.33' [Sun Sep 2 23:15:39 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting [Sun Sep 2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 7.59" [Sun Sep 2 23:15:39 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793 [Sun Sep 2 23:15:39 2012] Giving source the simple spatial ID 84 for pass 0, mean size = 7.59" [Mon Sep 3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src84.ximg exists [Mon Sep 3 04:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src84.csv [Mon Sep 3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src84_1.ximg exists [Mon Sep 3 04:46:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src84.csv [Mon Sep 3 04:46:45 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src84_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Sep 3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src84.ximg exists [Mon Sep 3 04:46:47 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists [Mon Sep 3 04:46:47 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly [Mon Sep 3 04:47:36 2012] Source 116 is offset by 2.343754 and -5.501378 pixels which is larger than 2 X fitted extent = 1.791775 x 1.791775, not incorporating fit results [Mon Sep 3 04:47:36 2012] Source 116 is offset by -0.327556 and 1.459610 pixels which is larger than 2 X fitted extent = 0.913913 x 0.913913, not incorporating fit results [Mon Sep 3 04:47:36 2012] Vigneting correction estimate = 1.000000 [Mon Sep 3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 3 04:47:36 2012] Assessing source extent using major [Mon Sep 3 04:47:36 2012] Source does appear to be extended [Mon Sep 3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Sep 3 18:16:02 2012] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting [Mon Sep 3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 7.59" [Mon Sep 3 18:16:02 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793 [Mon Sep 3 18:16:02 2012] Giving source the simple spatial ID 74 for pass 1, mean size = 7.59" [Tue Sep 4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src74.ximg exists [Tue Sep 4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src74.csv [Tue Sep 4 00:59:34 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src74_1.ximg exists [Tue Sep 4 00:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src74.csv [Tue Sep 4 00:59:34 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src74_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Sep 4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src74.ximg exists [Tue Sep 4 00:59:37 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists [Tue Sep 4 00:59:37 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly [Tue Sep 4 01:00:48 2012] Source 116 is offset by 2.349616 and -5.453010 pixels which is larger than 2 X fitted extent = 1.932589 x 1.932589, not incorporating fit results [Tue Sep 4 01:00:48 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 01:00:48 2012] Assessing source extent using major [Tue Sep 4 01:00:48 2012] Source does appear to be extended [Tue Sep 4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 01:00:49 2012] Source is confused with source 17 [Tue Sep 4 03:06:12 2012] XMMSAS src. selection expression = ellipse(25257.712616, 23195.076111, 652.500000, 652.500000, 0.000000, X, Y) [Tue Sep 4 03:06:12 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src116_src.reg [Tue Sep 4 03:06:12 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (253, 230) - (328, 305) [Tue Sep 4 03:06:12 2012] XMMSAS bgd. selection expression = annulus(25257.712616, 23195.076111, 1087.500000, 2175.000000, X, Y) && !ellipse(23819.903000, 22976.898000, 2656.712076, 2656.712076, 0.000000, X, Y) && !ellipse(22549.861511, 20230.467743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23729.902000, 22145.636000, 1335.168038, 1335.168038, 0.000000, X, Y) && !ellipse(22798.451000, 20953.749800, 2796.496080, 888.456026, 109.120000, X, Y) && !ellipse(24416.654800, 26328.410000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(24858.025600, 25714.195400, 1100.248032, 587.299217, 121.895200, X, Y) && !ellipse(23692.692000, 23145.650000, 1987.616057, 1987.616057, 0.000000, X, Y) && !ellipse(24167.244993, 24262.723017, 1461.312042, 244.971393, 108.649499, X, Y) && !ellipse(24491.373480, 25070.289800, 547.286416, 547.286416, 0.000000, X, Y) && !ellipse(25198.905000, 26234.288000, 1080.384031, 1080.384031, 0.000000, X, Y) && !ellipse(23613.733268, 24821.672000, 1685.840049, 531.452015, 98.446180, X, Y) && !ellipse(22892.332944, 21421.942145, 1180.904034, 634.993844, 112.623009, X, Y) && !ellipse(25486.518000, 26596.798200, 1581.440046, 772.876822, 145.224000, X, Y) && !ellipse(23631.069600, 25057.808000, 1180.904034, 504.935215, 99.541560, X, Y) && !ellipse(24307.052826, 25707.341827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25977.374680, 25345.206220, 1071.080031, 1071.080031, 0.000000, X, Y) && !ellipse(23743.152000, 25371.650000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(25986.598000, 27131.410000, 2073.808060, 2073.808060, 0.000000, X, Y) && !ellipse(23819.138092, 21182.988708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24421.670441, 21533.773834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25325.083984, 24576.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.962799, 25438.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25444.586853, 25016.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.601227, 26134.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26149.093567, 23701.151245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.631714, 24127.827728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.105957, 21526.664993, 870.000000, 870.000000, 0.000000, X, Y) [Tue Sep 4 03:06:12 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src116.gif [Tue Sep 4 04:20:49 2012] Mean detx,y = (2766.56, -3902.03) [Tue Sep 4 04:20:50 2012] Setting backscal keywords in source and bgd. spectrum [Tue Sep 4 04:20:55 2012] grppha failed [Tue Sep 4 04:20:55 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src116_src.pi.gz [Tue Sep 4 04:20:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src116_bgd.pi.gz [Tue Sep 4 04:29:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Sep 4 04:29:44 2012] rmf not generated due to insufficient counts [Tue Sep 4 04:30:02 2012] Updating aperture counts using extracted products [Tue Sep 4 04:30:02 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src116_src.pi.gz [Tue Sep 4 04:30:02 2012] No arf file for this source, not re-computing flux [Tue Sep 4 04:30:06 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Sep 4 04:30:08 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src116_pl.csv not found, spectral fit skipped or did not complete