[Sun Sep  2 10:34:20 2012] Detection parameters:
  Position = (282.0, 306.0) = 15 4 0.61 -41 47 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 516.3 +/- 29.2
  Background counts = 25.0
  Rate = 0.07 +/- 0.004

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 1.31'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 7.08 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 7.08"
[Sun Sep  2 23:15:39 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.883
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 7.08"
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src7.ximg exists
[Mon Sep  3 04:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src7.csv
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src7_1.ximg exists
[Mon Sep  3 04:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src7.csv
[Mon Sep  3 04:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Mon Sep  3 04:46:45 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Mon Sep  3 04:47:35 2012] Warning, spatial fit 7 centroid is now closest to src. 8
[Mon Sep  3 04:47:35 2012] Spatial fit model total counts = 1469.970000, observed total counts = 1495.000000
[Mon Sep  3 04:47:35 2012] Offset between fit and detection position for source 11 = 4.136693 pixels
[Mon Sep  3 04:47:35 2012] Warning, changing simple spatial fit ID from 7 to 51
[Mon Sep  3 04:47:35 2012] 1497.021000 total counts/ 1394.330000 bgd. counts: snr = 2.750107
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.136693 pixels
  Position = (279.5, 302.7) = 15 4 1.58 -41 48 7.0
  Extent = 7.6 (4.9-9.6)", rotation angle = 0
  Source counts = 102.7 +/- 38.7
  Background counts = 1394.3
  Rate = 0.01 +/- 0.005
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:36 2012] Source is confused with source 8
[Mon Sep  3 04:47:36 2012] Source is confused with source 37
[Mon Sep  3 18:16:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Mon Sep  3 18:16:02 2012] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.246
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 7.57"
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Sep  4 00:59:32 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src7 appears to have run properly
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Sep  4 00:59:35 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Sep  4 01:00:48 2012] Spatial fit model total counts = 1897.080000, observed total counts = 1878.000000
[Tue Sep  4 01:00:48 2012] Offset between fit and detection position for source 11 = 3.262396 pixels
[Tue Sep  4 01:00:48 2012] 1864.339000 total counts/ 1591.090000 bgd. counts: snr = 6.850326
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 3.262396 pixels
  Position = (281.1, 305.5) = 15 4 0.95 -41 47 54.7
  Extent = 10.4 (9.1-12.1)", rotation angle = 0
  Source counts = 273.2 +/- 43.2
  Background counts = 1591.1
  Rate = 0.04 +/- 0.006
[Tue Sep  4 01:00:48 2012] Spatial fit model total counts = 2278.580000, observed total counts = 2275.000000
[Tue Sep  4 01:00:48 2012] Offset between fit and detection position for source 11 = 2.354746 pixels
[Tue Sep  4 01:00:48 2012] Warning, changing simple spatial fit ID from 7 to 38
[Tue Sep  4 01:00:48 2012] 2136.849000 total counts/ 1750.930000 bgd. counts: snr = 9.222778
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 2.354746 pixels
  Position = (281.2, 303.2) = 15 4 0.92 -41 48 4.9
  Extent = 14.2 (14.2-28.4)", rotation angle = 0
  Source counts = 385.9 +/- 46.2
  Background counts = 1750.9
  Rate = 0.05 +/- 0.006
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 03:06:07 2012] XMMSAS src. selection expression = ellipse(24416.654800, 26328.410000, 852.522025, 852.522025, 0.000000, X, Y)
[Tue Sep  4 03:06:07 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src11_src.reg
[Tue Sep  4 03:06:07 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (232, 254) - (330, 352)
[Tue Sep  4 03:06:07 2012] XMMSAS bgd. selection expression = annulus(24416.654800, 26328.410000, 1420.870041, 2841.740082, X, Y) && !ellipse(23819.903000, 22976.898000, 2656.712076, 2656.712076, 0.000000, X, Y) && !ellipse(22798.451000, 20953.749800, 2796.496080, 888.456026, 109.120000, X, Y) && !ellipse(24858.025600, 25714.195400, 1100.248032, 587.299217, 121.895200, X, Y) && !ellipse(23692.692000, 23145.650000, 1987.616057, 1987.616057, 0.000000, X, Y) && !ellipse(24167.244993, 24262.723017, 1461.312042, 244.971393, 108.649499, X, Y) && !ellipse(24491.373480, 25070.289800, 547.286416, 547.286416, 0.000000, X, Y) && !ellipse(25198.905000, 26234.288000, 1080.384031, 1080.384031, 0.000000, X, Y) && !ellipse(24794.570400, 28036.872000, 1203.856035, 1203.856035, 0.000000, X, Y) && !ellipse(24486.739664, 26836.394948, 1206.384035, 563.235893, 105.816707, X, Y) && !ellipse(23613.733268, 24821.672000, 1685.840049, 531.452015, 98.446180, X, Y) && !ellipse(25408.045400, 28536.552000, 1174.520034, 1174.520034, 0.000000, X, Y) && !ellipse(25486.518000, 26596.798200, 1581.440046, 772.876822, 145.224000, X, Y) && !ellipse(26372.456000, 27469.654000, 1165.688034, 1165.688034, 0.000000, X, Y) && !ellipse(25239.296000, 29144.374000, 1141.768033, 1141.768033, 0.000000, X, Y) && !ellipse(23631.069600, 25057.808000, 1180.904034, 504.935215, 99.541560, X, Y) && !ellipse(26525.210306, 27970.578368, 1461.231211, 1357.207029, 90.000000, X, Y) && !ellipse(25432.219727, 28050.731750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27159.462000, 28517.638000, 1253.640036, 1253.640036, 0.000000, X, Y) && !ellipse(25200.770000, 28378.513000, 1202.536035, 1202.536035, 0.000000, X, Y) && !ellipse(24307.052826, 25707.341827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26678.654800, 29720.360000, 963.408028, 963.408028, 0.000000, X, Y) && !ellipse(25977.374680, 25345.206220, 1071.080031, 1071.080031, 0.000000, X, Y) && !ellipse(26439.155518, 28646.815033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23743.152000, 25371.650000, 1136.696033, 1136.696033, 0.000000, X, Y) && !ellipse(25986.598000, 27131.410000, 2073.808060, 2073.808060, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(26104.856000, 30406.514000, 2809.976081, 2809.976081, 0.000000, X, Y) && !ellipse(25325.083984, 24576.944519, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.611603, 28153.858398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.220000, 30407.484000, 2853.872082, 2853.872082, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(27067.024811, 29358.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26456.962799, 25438.504181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25444.586853, 25016.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27479.836731, 29794.568268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25257.712616, 23195.076111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.601227, 26134.567902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26149.093567, 23701.151245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26701.631714, 24127.827728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27513.441437, 27753.033936, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Sep  4 03:06:07 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src11.gif
[Tue Sep  4 03:25:48 2012] Mean detx,y = (2359.55, -822.93) 
[Tue Sep  4 03:25:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 03:25:59 2012] grppha failed
[Tue Sep  4 03:25:59 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src11_src.pi.gz
[Tue Sep  4 03:25:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Tue Sep  4 04:30:01 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:01 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src11_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag c found in src. 11 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 11 has no response, skipping
[Tue Sep  4 04:30:07 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete