[Sun Sep  2 10:34:20 2012] Detection parameters:
  Position = (343.3, 382.0) = 15 3 36.78 -41 42 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 614.5 +/- 31.3
  Background counts = 21.0
  Rate = 0.1 +/- 0.005

[Sun Sep  2 10:34:23 2012] Off-axis axis estimate = 6.87'
[Sun Sep  2 23:15:39 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 23:15:39 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Sun Sep  2 23:15:39 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.979
[Sun Sep  2 23:15:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.87"
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Sep  3 04:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src1.csv
[Mon Sep  3 04:46:43 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Sep  3 04:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src1.csv
[Mon Sep  3 04:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Sep  3 04:46:45 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Sep  3 04:46:45 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Sep  3 04:47:35 2012] Warning, spatial fit 1 centroid is now closest to src. 24
[Mon Sep  3 04:47:35 2012] Spatial fit model total counts = 1932.030000, observed total counts = 1926.000000
[Mon Sep  3 04:47:35 2012] Offset between fit and detection position for source 1 = 2.381259 pixels
[Mon Sep  3 04:47:35 2012] Warning, changing simple spatial fit ID from 1 to 2
[Mon Sep  3 04:47:35 2012] 1904.351000 total counts/ 1155.030000 bgd. counts: snr = 22.048105
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.381259 pixels
  Position = (345.6, 382.7) = 15 3 35.90 -41 42 19.1
  Extent = 20.1 (19.8-40.2)" x 8.9 (7.4-10.1)", rotation angle = 342 (337-346) degrees
  Source counts = 749.3 +/- 43.6
  Background counts = 1155.0
  Rate = 0.1 +/- 0.006
[Mon Sep  3 04:47:36 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:36 2012] Assessing source extent using major axis lower bound
[Mon Sep  3 04:47:36 2012] Source does appear to be extended
[Mon Sep  3 04:47:36 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.96
[Mon Sep  3 04:47:36 2012] Source is asymmetric
[Mon Sep  3 04:47:36 2012] Source is confused with source 24
[Mon Sep  3 18:16:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep  3 18:16:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep  3 18:16:02 2012] Initial guess for spatial extent in simple fitting = 14.51"
[Mon Sep  3 18:16:02 2012] source mask rpix=3.3, npix_max = 58, mask sum = 49, frac = 0.833
[Mon Sep  3 18:16:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.51"
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Sep  4 00:59:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src1.csv
[Tue Sep  4 00:59:32 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Sep  4 00:59:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src1.csv
[Tue Sep  4 00:59:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Sep  4 00:59:35 2012] fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Sep  4 00:59:35 2012] Fit fullrun_mos2_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Sep  4 01:00:48 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Tue Sep  4 01:00:48 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:48 2012] Assessing source extent using major axis lower bound
[Tue Sep  4 01:00:48 2012] Source does appear to be extended
[Tue Sep  4 01:00:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.96
[Tue Sep  4 01:00:48 2012] Source is asymmetric
[Tue Sep  4 03:06:06 2012] XMMSAS src. selection expression = ellipse(30018.270000, 33242.936000, 1205.460035, 535.390815, 342.320100, X, Y)
[Tue Sep  4 03:06:06 2012] Writing source region out to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src1_src.reg
[Tue Sep  4 03:06:06 2012] Extracting stamp from image fullrun_mos2_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (276, 313) - (415, 452)
[Tue Sep  4 03:06:06 2012] XMMSAS bgd. selection expression = annulus(30018.270000, 33242.936000, 2009.100058, 4018.200116, X, Y) && !ellipse(30250.594000, 33351.117800, 1578.488045, 1578.488045, 0.000000, X, Y) && !ellipse(29210.042000, 32866.388000, 3147.480091, 3147.480091, 0.000000, X, Y) && !ellipse(25408.045400, 28536.552000, 1174.520034, 1174.520034, 0.000000, X, Y) && !ellipse(27997.862000, 32419.774000, 2868.248083, 2868.248083, 0.000000, X, Y) && !ellipse(25239.296000, 29144.374000, 1141.768033, 1141.768033, 0.000000, X, Y) && !ellipse(31834.416656, 33561.351257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27422.844000, 31242.782000, 1434.128041, 1434.128041, 0.000000, X, Y) && !ellipse(27790.062000, 32719.892000, 2051.960059, 2051.960059, 0.000000, X, Y) && !ellipse(26525.210306, 27970.578368, 1461.231211, 1357.207029, 90.000000, X, Y) && !ellipse(27309.336000, 31361.046800, 1391.304040, 1391.304040, 0.000000, X, Y) && !ellipse(33991.431488, 33965.603363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32246.924000, 33596.832000, 2215.360064, 414.061612, 359.826000, X, Y) && !ellipse(27159.462000, 28517.638000, 1253.640036, 1253.640036, 0.000000, X, Y) && !ellipse(25200.770000, 28378.513000, 1202.536035, 1202.536035, 0.000000, X, Y) && !ellipse(26678.654800, 29720.360000, 963.408028, 963.408028, 0.000000, X, Y) && !ellipse(25727.145691, 30214.025726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26981.642000, 31014.794000, 1405.144040, 1405.144040, 0.000000, X, Y) && !ellipse(28762.534485, 31786.312836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.155518, 28646.815033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28793.264000, 29793.168000, 1752.080050, 1752.080050, 0.000000, X, Y) && !ellipse(26509.101000, 31713.517100, 748.806422, 748.806422, 0.000000, X, Y) && !ellipse(34595.578000, 33095.150000, 1774.224051, 1774.224051, 0.000000, X, Y) && !ellipse(27766.252000, 28640.536000, 2868.256083, 2697.216078, 1.786000, X, Y) && !ellipse(28640.732000, 29818.586000, 1288.072037, 1288.072037, 0.000000, X, Y) && !ellipse(26104.856000, 30406.514000, 2809.976081, 2809.976081, 0.000000, X, Y) && !ellipse(35439.992000, 34299.982000, 1912.040055, 1912.040055, 0.000000, X, Y) && !ellipse(30512.220032, 32058.288727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31449.201111, 31703.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32177.222000, 31763.240000, 3049.536088, 1823.336052, 309.336000, X, Y) && !ellipse(31698.497742, 32218.323273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29395.220000, 30407.484000, 2853.872082, 2853.872082, 0.000000, X, Y) && !ellipse(27988.540000, 29086.366000, 2507.280072, 2507.280072, 0.000000, X, Y) && !ellipse(27067.024811, 29358.012421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29802.326263, 31013.720551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33306.770000, 33873.346000, 1523.488044, 1523.488044, 0.000000, X, Y) && !ellipse(27479.836731, 29794.568268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30725.190000, 31109.172000, 2889.760083, 2889.760083, 0.000000, X, Y) && !ellipse(34900.425903, 32576.664612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31706.968000, 31066.130600, 1524.768044, 1524.768044, 0.000000, X, Y) && !ellipse(32701.096000, 32018.722000, 1672.880048, 1672.880048, 0.000000, X, Y) && !ellipse(33344.506000, 32450.334000, 1655.256048, 1655.256048, 0.000000, X, Y) && !ellipse(30764.086000, 31562.572000, 1540.056044, 1540.056044, 0.000000, X, Y)
[Tue Sep  4 03:06:06 2012] Writing fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src1.gif
[Tue Sep  4 03:06:17 2012] Mean detx,y = (-5168.04, 3796.43) 
[Tue Sep  4 03:06:18 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 03:06:43 2012] grppha failed
[Tue Sep  4 03:06:43 2012] Setting source spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Sep  4 03:06:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Sep  4 04:30:01 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:01 2012] Error reading totcts from fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Sep  4 04:30:02 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:06 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Sep  4 04:30:06 2012] Source 1 has no response, skipping
[Tue Sep  4 04:30:07 2012] xmm0111090101/analysis//spectral/fullrun_mos2_xmm0111090101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete