[Sun Sep 2 10:33:16 2012] Detection parameters: Position = (360.2, 364.5) = 15 3 30.22 -41 43 44.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 105.4 +/- 15.7 Background counts = 41.1 Rate = 0.02 +/- 0.003 [Sun Sep 2 10:33:18 2012] Off-axis axis estimate = 6.56' [Sun Sep 2 17:28:02 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting [Sun Sep 2 17:28:02 2012] Initial guess for spatial extent in simple fitting = 9.71" [Sun Sep 2 17:28:02 2012] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.871 [Sun Sep 2 17:28:02 2012] Giving source the simple spatial ID 85 for pass 0, mean size = 9.71" [Sun Sep 2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src85.ximg exists [Sun Sep 2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src85.csv [Sun Sep 2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src85_1.ximg exists [Sun Sep 2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src85.csv [Sun Sep 2 23:15:35 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src85_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Sep 2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists [Sun Sep 2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists [Sun Sep 2 23:15:38 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly [Mon Sep 3 04:47:21 2012] Source 87 is offset by 4.302369 and 1.166590 pixels which is larger than 2 X fitted extent = 1.177982 x 1.177982, not incorporating fit results [Mon Sep 3 04:47:22 2012] Warning, spatial fit 85 centroid is now closest to src. 91 [Mon Sep 3 04:47:22 2012] Vigneting correction estimate = 1.000000 [Mon Sep 3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Sep 3 04:47:22 2012] Assessing source extent using major [Mon Sep 3 04:47:22 2012] Source does appear to be extended [Mon Sep 3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Sep 3 04:47:22 2012] Source is confused with source 83 [Mon Sep 3 10:59:50 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting [Mon Sep 3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 9.71" [Mon Sep 3 10:59:50 2012] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.871 [Mon Sep 3 10:59:50 2012] Giving source the simple spatial ID 75 for pass 1, mean size = 9.71" [Mon Sep 3 18:15:58 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src75.ximg exists [Mon Sep 3 18:15:58 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src75_1.ximg exists [Mon Sep 3 18:15:58 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src75 appears to have run properly [Mon Sep 3 18:16:01 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src75.ximg exists [Mon Sep 3 18:16:01 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists [Mon Sep 3 18:16:01 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly [Tue Sep 4 01:00:25 2012] Source 87 is offset by 4.363610 and 1.307924 pixels which is larger than 2 X fitted extent = 1.054028 x 1.054028, not incorporating fit results [Tue Sep 4 01:00:26 2012] Warning, spatial fit 75 centroid is now closest to src. 83 [Tue Sep 4 01:00:26 2012] Source 87 is offset by 0.223697 and 1.686360 pixels which is larger than 2 X fitted extent = 1.472589 x 1.472589, not incorporating fit results [Tue Sep 4 01:00:26 2012] Vigneting correction estimate = 1.000000 [Tue Sep 4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue Sep 4 01:00:26 2012] Assessing source extent using major [Tue Sep 4 01:00:26 2012] Source does appear to be extended [Tue Sep 4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue Sep 4 02:08:57 2012] XMMSAS src. selection expression = ellipse(31288.824066, 31666.799347, 652.500000, 652.500000, 0.000000, X, Y) [Tue Sep 4 02:08:57 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src87_src.reg [Tue Sep 4 02:08:57 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (323, 327) - (398, 402) [Tue Sep 4 02:08:57 2012] XMMSAS bgd. selection expression = annulus(31288.824066, 31666.799347, 1087.500000, 2175.000000, X, Y) && !ellipse(30296.478000, 30840.776000, 2753.472079, 2753.472079, 0.000000, X, Y) && !ellipse(29605.250000, 32691.400000, 1418.216041, 1418.216041, 0.000000, X, Y) && !ellipse(30412.274109, 32893.693695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31700.303162, 33630.453705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28683.236000, 32498.536000, 1474.296042, 1474.296042, 0.000000, X, Y) && !ellipse(27842.018086, 28950.467504, 1355.853890, 734.349261, 132.666456, X, Y) && !ellipse(35100.892000, 34243.340000, 1897.800055, 1897.800055, 0.000000, X, Y) && !ellipse(35193.402000, 34524.698000, 1808.392052, 1808.392052, 0.000000, X, Y) && !ellipse(28834.558000, 29814.902000, 1312.496038, 1312.496038, 0.000000, X, Y) && !ellipse(28953.972717, 33361.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29396.188000, 33049.608000, 2948.128085, 2948.128085, 0.000000, X, Y) && !ellipse(33302.280000, 34159.749000, 1709.984049, 1709.984049, 0.000000, X, Y) && !ellipse(34271.272000, 34217.938400, 1792.120052, 1792.120052, 0.000000, X, Y) && !ellipse(29161.606000, 30047.264000, 1414.600041, 1414.600041, 0.000000, X, Y) && !ellipse(29566.767000, 30352.640000, 1732.352050, 1732.352050, 0.000000, X, Y) && !ellipse(28359.668000, 30929.109200, 1384.648040, 1384.648040, 0.000000, X, Y) && !ellipse(29607.504000, 30992.230000, 1457.416042, 1457.416042, 0.000000, X, Y) && !ellipse(28404.347137, 29371.515900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.552887, 31453.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.962830, 32055.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.784000, 31798.144000, 1489.872043, 1489.872043, 0.000000, X, Y) && !ellipse(34044.125854, 33359.869049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.403839, 34008.006836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30174.216217, 33880.979614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33472.545837, 32677.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32091.184540, 34130.892212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.226349, 32658.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.901428, 31009.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32678.965546, 33013.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29769.630000, 30526.532000, 2829.200081, 2829.200081, 0.000000, X, Y) [Tue Sep 4 02:08:57 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src87.gif [Tue Sep 4 02:52:36 2012] Mean detx,y = (2148.79, 5630.16) [Tue Sep 4 02:52:37 2012] Setting backscal keywords in source and bgd. spectrum [Tue Sep 4 02:52:48 2012] grppha failed [Tue Sep 4 02:52:48 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src87_src.pi.gz [Tue Sep 4 02:52:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src87_bgd.pi.gz [Tue Sep 4 03:06:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Tue Sep 4 03:06:03 2012] rmf not generated due to insufficient counts [Tue Sep 4 04:30:01 2012] Updating aperture counts using extracted products [Tue Sep 4 04:30:01 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src87_src.pi.gz [Tue Sep 4 04:30:01 2012] No arf file for this source, not re-computing flux [Tue Sep 4 04:30:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Tue Sep 4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src87_pl.csv not found, spectral fit skipped or did not complete