[Sun Sep  2 10:33:16 2012] Detection parameters:
  Position = (347.4, 390.0) = 15 3 35.21 -41 41 57.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.0 +/- 14.3
  Background counts = 14.6
  Rate = 0.02 +/- 0.003

[Sun Sep  2 10:33:18 2012] Off-axis axis estimate = 7.53'
[Sun Sep  2 17:28:02 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:28:02 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Sun Sep  2 17:28:02 2012] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.804
[Sun Sep  2 17:28:02 2012] Giving source the simple spatial ID 89 for pass 0, mean size = 10.19"
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src89.ximg exists
[Sun Sep  2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src89.csv
[Sun Sep  2 23:15:35 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src89_1.ximg exists
[Sun Sep  2 23:15:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src89.csv
[Sun Sep  2 23:15:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Sun Sep  2 23:15:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src89.csv
[Sun Sep  2 23:15:38 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Sun Sep  2 23:15:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src89.csv
[Sun Sep  2 23:15:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass0_tfrozen_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 04:47:22 2012] Warning: source 88 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 67 at 11.891710 pixels away
[Mon Sep  3 04:47:22 2012] Warning, spatial fit 89 centroid is now closest to src. 46
[Mon Sep  3 04:47:22 2012] Vigneting correction estimate = 1.000000
[Mon Sep  3 04:47:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep  3 04:47:22 2012] Assessing source extent using major
[Mon Sep  3 04:47:22 2012] Source does appear to be extended
[Mon Sep  3 04:47:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep  3 04:47:22 2012] Source is confused with source 66
[Mon Sep  3 10:59:50 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Mon Sep  3 10:59:50 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Mon Sep  3 10:59:50 2012] source mask rpix=2.3, npix_max = 32, mask sum = 26, frac = 0.804
[Mon Sep  3 10:59:50 2012] Giving source the simple spatial ID 79 for pass 1, mean size = 10.19"
[Mon Sep  3 18:15:58 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src79.ximg exists
[Mon Sep  3 18:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src79.csv
[Mon Sep  3 18:15:58 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src79_1.ximg exists
[Mon Sep  3 18:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src79.csv
[Mon Sep  3 18:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep  3 18:16:01 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Mon Sep  3 18:16:01 2012] fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Mon Sep  3 18:16:01 2012] Fit fullrun_mos1_xmm0111090101_pi300-10000_cl_pass1_tfrozen_src79 appears to have run properly
[Tue Sep  4 01:00:26 2012] Source 67 is offset by 7.025481 and -5.123706 pixels which is larger than
2 X fitted extent = 4.666529 x 4.666529, not incorporating fit results
[Tue Sep  4 01:00:26 2012] Warning, spatial fit 79 centroid is now closest to src. 66
[Tue Sep  4 01:00:26 2012] Vigneting correction estimate = 1.000000
[Tue Sep  4 01:00:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep  4 01:00:26 2012] Assessing source extent using major
[Tue Sep  4 01:00:26 2012] Source does appear to be extended
[Tue Sep  4 01:00:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep  4 02:08:57 2012] XMMSAS src. selection expression = ellipse(30174.216217, 33880.979614, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep  4 02:08:57 2012] Writing source region out to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src67_src.reg
[Tue Sep  4 02:08:57 2012] Extracting stamp from image fullrun_mos1_xmm0111090101_pi300-10000_cl_sm2.00.img.gz, (310, 352) - (385, 427)
[Tue Sep  4 02:08:57 2012] XMMSAS bgd. selection expression = annulus(30174.216217, 33880.979614, 1087.500000, 2175.000000, X, Y) && !ellipse(27668.615800, 31736.133600, 642.511218, 642.511218, 0.000000, X, Y) && !ellipse(30296.478000, 30840.776000, 2753.472079, 2753.472079, 0.000000, X, Y) && !ellipse(29605.250000, 32691.400000, 1418.216041, 1418.216041, 0.000000, X, Y) && !ellipse(30412.274109, 32893.693695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31700.303162, 33630.453705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28683.236000, 32498.536000, 1474.296042, 1474.296042, 0.000000, X, Y) && !ellipse(25522.384000, 29631.846000, 2599.584075, 2599.584075, 0.000000, X, Y) && !ellipse(28953.972717, 33361.772705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29396.188000, 33049.608000, 2948.128085, 2948.128085, 0.000000, X, Y) && !ellipse(33302.280000, 34159.749000, 1709.984049, 1709.984049, 0.000000, X, Y) && !ellipse(28074.401337, 31269.434387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29566.767000, 30352.640000, 1732.352050, 1732.352050, 0.000000, X, Y) && !ellipse(28359.668000, 30929.109200, 1384.648040, 1384.648040, 0.000000, X, Y) && !ellipse(29607.504000, 30992.230000, 1457.416042, 1457.416042, 0.000000, X, Y) && !ellipse(30064.552887, 31453.040283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.962830, 32055.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30479.784000, 31798.144000, 1489.872043, 1489.872043, 0.000000, X, Y) && !ellipse(31288.824066, 31666.799347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30754.403839, 34008.006836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32091.184540, 34130.892212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32399.226349, 32658.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31294.901428, 31009.345062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32678.965546, 33013.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29769.630000, 30526.532000, 2829.200081, 2829.200081, 0.000000, X, Y)
[Tue Sep  4 02:08:57 2012] Writing fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src67.gif
[Tue Sep  4 02:53:36 2012] Mean detx,y = (4320.13, 5329.82) 
[Tue Sep  4 02:53:37 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Sep  4 02:53:45 2012] grppha failed
[Tue Sep  4 02:53:46 2012] Setting source spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src67_src.pi.gz
[Tue Sep  4 02:53:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Tue Sep  4 03:06:03 2012] Not generating rmf since there are only 90 counts
[Tue Sep  4 03:06:03 2012] rmf not generated due to insufficient counts
[Tue Sep  4 04:30:01 2012] Updating aperture counts using extracted products
[Tue Sep  4 04:30:01 2012] Error reading totcts from fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src67_src.pi.gz
[Tue Sep  4 04:30:01 2012] No arf file for this source, not re-computing flux
[Tue Sep  4 04:30:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Sep  4 04:30:06 2012] xmm0111090101/analysis//spectral/fullrun_mos1_xmm0111090101_pi300-10000_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete